7 warehouses in Europe
Klüber
-
Klübersynth GEM 2-220
Quick orderingMore infoKlübersynth GEM 2-220
Synthetic high-performance gear oils
Application Klübersynth GEM 2-220
Klübersynth GEM 2 oils may be used for the lubrication of spur, bevel and worm gears as well as the associated machine elements such as sliding and rolling bearings. Furthermore, they are particularly suited for applications where leaking or dripping lubricant might pose a hazard to the environment.
Show moreStarting at: € 45,33 / L -
Klübersynth GEM 4-320 N
Quick orderingMore infoKlübersynth GEM 4-320 N
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Application Klübersynth GEM 4-320 N
Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.
Show moreStarting at: € 44,71 / L -
Klüber Klüberfluid B-F 1 Ultra
Quick orderingMore infoKlüber Klüberfluid B-F 1 Ultra
Running-in lubricant for open drives
Application Klüber Klüberfluid B-F 1 Ultra
Klüberfluid B-F 1 Ultra is used in the splash, paddle wheel or circulation lubrication of open gears for running-in lubrication or tooth profile correction. Possible uses are limited neither by component size nor by driving power. The peripheral speed should not exceed 8.5 m/s. Drives of this kind are mainly used in rotary kilns, tube mills, and similar machines as are used in the cement, lime, gypsum, mining and chemical industries. Klüberfluid B-F 1 Ultra is not suitable for the lubrication of (rolling or sliding) bearings.
Show moreStarting at: € 32,96 / Kg -
Klüber Klüberfluid B-F 2 Ultra
Quick orderingMore infoKlüber Klüberfluid B-F 2 Ultra
Light-coloured running-in and correction lubricant for open gear rim/pinion drives
Application Klüber Klüberfluid B-F 2 Ultra
Klüberfluid B-F 2 Ultra is used for the running-in lubrication of new, open drives by means of immersion, transfer, circulation and spray lubrication, or for tooth flank correction of large gear drives that have been in use for some time. The use of Klüberfluid B-F 2 Ultra is not subject to any limitations regarding the size or power of the drives. A peripheral speed of 8.5 m/s should not be exceeded. Such drives are primarily to be found in rotary kilns, tubular mills and similar machinery in the cement, lime, gypsum and chemical industries and the mining sector. Klüberfluid B-F 2 Ultra must not be used for plain or rolling bearings.
Show moreStarting at: € 32,74 / Kg -
Klüber Constant GL 2000
Quick orderingMore infoKlüber Constant GL 2000
Impregnating fluid for sintered metal plain bearings
Application Klüber Constant GL 2000
CONSTANT GL 2000 is intended for use in sintered metal plain bearings in precision, automotive and electrical engineering as well as household applicances.
Show moreStarting at: € 36,37 / L -
Klüber Klüberfluid C-F 7 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 7 Ultra
Operational lubricant for large, open girth gear drives
Application Klüber Klüberfluid C-F 7 Ultra
Klüberfluid C-F 7 Ultra can be applied by immersion, transfer paddle wheel, circulation or spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 10 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are in sugar and paper production as well as in the marine and offshore sector.
Show moreStarting at: € 36,02 / Kg -
Klüber Klübersynth CH 6-110
Quick orderingMore infoKlüber Klübersynth CH 6-110
High-temperature chain oil for conveyor and lifting chains
Application Klüber Klübersynth CH 6-110
Klübersynth CH 6-110 has been designed for the lubrication of conveyor and lifting chains in conveyors and paintshops subject to high temperatures. Owing to its special base oil concept Klübersynth CH 6-110 is compatible with sensitive paint systems used in the automotive industry. Klübersynth CH 6-110 can also be used for other high-temperature chain applications in conveyors requiring minimum residue formation, e.g. with suppliers to the automotive industry; manufacturers of electric household appliances; coating plants and paintshops.
Show moreStarting at: € 45,65 / L -
Klüber WOLFRAKOTE TOP FLUID
Quick orderingMore infoKlüber WOLFRAKOTE TOP FLUID
Solid lubricant suspensions for high-temperature applications
Application Klüber WOLFRAKOTE TOP FLUID
WOLFRAKOTE TOP FLUID products are used for the lubrication of conveyor chains in tube annealing furnaces, continuous furnaces or stress-relieving ovens at temperatures > 250°C.
Show moreStarting at: € 120,44 / L -
Klüber Barrierta I MI Fluid
Quick orderingMore infoKlüber Barrierta I MI Fluid
High-temperature lubricating fluids
Application Klüber Barrierta I MI Fluid
Bearings and guides BARRIERTA Fluids attain long service lives in rolling bearings, plain bearings, sintered metal bearings and guides subject to extreme temperatures or aggressive chemicals. Owing to their low vapour pressures, and depending on the viscosity grade, BARRIERTA Fluids are also suitable for highvacuum applications. Electrical contacts BARRIERTA Fluids offer long-term protection against wear on electrical contacts, especially those with gold surfaces. There are no known decomposition products that would have an insulating effect on the contacts. Chains BARRIERTA I S Fluid is suitable for the lubrication of hightemperature chains and even meets stringent hygiene requirements. BARRIERTA IS Fluid is non-toxic and nonodorous. Plastic-plastic friction points BARRIERTA Fluids are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). A negative impact on materials is not to be expected. Nevertheless, we recommend testing the lubricant's compatibility with the materials in question prior to series application.
Show more€ 1 153,55 -
Klüber Summit PGS 2
Quick orderingMore infoKlüber Summit PGS 2
Synthetic gas compressor oils
Application Klüber Summit PGS 2
Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Show moreStarting at: € 51,76 / L -
Klüber Klübersynth GEM 4-460 N
Quick orderingMore infoKlüber Klübersynth GEM 4-460 N
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Application Klüber Klübersynth GEM 4-460 N
Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.
Show moreStarting at: € 44,71 / L -
Klüber Barrierta I S Fluid
Quick orderingMore infoKlüber Barrierta I S Fluid
High-temperature lubricating fluids
Application Klüber Barrierta I S Fluid
Bearings and guides BARRIERTA Fluids attain long service lives in rolling bearings, plain bearings, sintered metal bearings and guides subject to extreme temperatures or aggressive chemicals. Owing to their low vapour pressures, and depending on the viscosity grade, BARRIERTA Fluids are also suitable for highvacuum applications. Electrical contacts BARRIERTA Fluids offer long-term protection against wear on electrical contacts, especially those with gold surfaces. There are no known decomposition products that would have an insulating effect on the contacts. Chains BARRIERTA I S Fluid is suitable for the lubrication of hightemperature chains and even meets stringent hygiene requirements. BARRIERTA IS Fluid is non-toxic and nonodorous. Plastic-plastic friction points BARRIERTA Fluids are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). A negative impact on materials is not to be expected. Nevertheless, we recommend testing the lubricant's compatibility with the materials in question prior to series application.
Show moreStarting at: € 1 181,62 -
Klüber BARRIERTA L 55/1
Quick orderingMore infoKlüber BARRIERTA L 55/1
High-temperature long-term greases
Application Klüber BARRIERTA L 55/1
Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.
Show moreStarting at: € 980,25 / Kg -
Klüber Klüberfood NH1 CH 2-150
Quick orderingMore infoKlüber Klüberfood NH1 CH 2-150
High-temperature chain oils for the food and pharmaceutical industries
Application Klüber Klüberfood NH1 CH 2-150
The Klüberfood NH1 CH 2 oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads.They are particularly used for chains in baking ovens and other high- temperature chain applications in the food-processing industry
Show moreStarting at: € 40,37 / L -
Klüber Constant OY 150 K
Quick orderingMore infoKlüber Constant OY 150 K
Synthetic impregnating oils for sintered metal plain bearings
Application Klüber Constant OY 150 K
CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
Show moreStarting at: € 49,46 / L -
Klüber Constant OY 220 K
Quick orderingMore infoKlüber Constant OY 220 K
Synthetic impregnating oils for sintered metal plain bearings
Application Klüber Constant OY 220 K
CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
Show moreStarting at: € 49,46 / L -
Klüber Constant OY 390 K
Quick orderingMore infoKlüber Constant OY 390 K
Synthetic impregnating oils for sintered metal plain bearings
Application Klüber Constant OY 390 K
CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
Show moreStarting at: € 49,46 / L -
Klüber Constant OY 100 K
Quick orderingMore infoKlüber Constant OY 100 K
Synthetic impregnating oils for sintered metal plain bearings
Application Klüber Constant OY 100 K
CONSTANT OY K oils are intended for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
Show moreStarting at: € 49,46 / L -
Klüber Klüberfood NH1 CH 2-75 Plus
Quick orderingMore infoKlüber Klüberfood NH1 CH 2-75 Plus
High-temperature chain oils for the food-processing industry
Application Klüber Klüberfood NH1 CH 2-75 Plus
The Klüberfood NH1 CH 2 Plus oil series has been designed for lubrication of all drive, control and transport chains subject to high temperatures and loads. They are particularly suitable for use in chain applications, in beverage can decorating, bakery ovens, as well as other high-temperature chain applications in the food industry. These oils are suitable for chain designs both with and without elastomer O-rings for slow, medium and highspeed chain applications such as those found in the beverage can manufacturing industry.
Show moreStarting at: € 37,97 / L -
Klüber Klüberbeta H 7- 500
Quick orderingMore infoKlüber Klüberbeta H 7- 500
Silicone oils for high-temperature applications
Application Klüber Klüberbeta H 7- 500
These Klüberbeta oils are used especially on Hymmen doublebelt presses for the lubrication of the plastic sealing bars. Experience has shown that temperatures up to 250 °C are possible with continuous relubrication. Further applications: – Maintenance and assembly aid for rubber and plastic parts – Sliding agent for plastic/metal friction pairings.
Show more€ 243,12 / L
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OilOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt