Klüber

Klüber Grafloscon A-G 1 Ultra

Priming and contrast lubricant containing graphite for open drives

Application Klüber Grafloscon A-G 1 Ultra

GRAFLOSCON A-G 1 ULTRA has been developed as a priming lubricant for large open girth gear and pinion drives. It can also be used as a contrast lubricant to check the loadcarrying pattern during the alignment of large drives. GRAFLOSCON A-G 1 ULTRA is also a lubricant for open rolling-contact gears (e.g. winches), slideways, racks, large chain drives and wire ropes.

Klüber Klübersynth BEM 44-4600

Fully synthetic high-performance fluid grease for a wide service temperature range

Application Klüber Klübersynth BEM 44-4600

Your technical challenges may be found in general industrial equipment, machine tools, heavy industry equipment (mining and cement), robotics, chemical and agricultural machinery. Examples are: Crushers, vertical roller mills, hammer mills; Mobile drilling equipment; Cranes, e.g. harbour or mining; Mixer and reactor drives; Harvesting machines; Conveyor belt drives

Klüber MICROLUBE GB 0

Universal high-performance lubricant

Application Klüber MICROLUBE GB 0

MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.

Klüber Klüberplex AG 11-462

White operating and priming lubricants

Application Klüber Klüberplex AG 11-462

Klüberplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and pinion drives and can also be used as contrast lubricant for checking the drive's load pattern. In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches or cranes and similar components can be effectively lubricated and protected using Klüberplex AG 11-461 and 462.

Klüber Klübersynth VR 69-252

Lubricating grease for drinking water fittings with EPDM elastomers

Application Klüber Klübersynth VR 69-252

Klübersynth VR 69-252 is suitable for the lubrication of all friction points subject to mechanical loads in spindle heads with EPDM elastomers, check and control valves, shower and heating fittings, and generally for the lubrication of seals that require a grease compatible with EPDM and in compliance with statutory drinking water regulations.

Klüber Klübersynth UH1 14-222

Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries

Application Klüber Klübersynth UH1 14-222

Klübersynth UH1 14-222 is suitable for use in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points that may have incidental and technically unavoidable contact with the food product. This food-grade lubricant is intended for the universal lubrication of rolling and plain bearings, lifting cylinders, joints, guide rods and rails, cams, etc.

Klüber STABURAGS NBU 30 PTM

Lubricating and assembly grease

Application Klüber STABURAGS NBU 30 PTM

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM faciliates assembly and disassembly of ABS sensors in vehicles.

Klüber AMBLYGON TA 15-2

Special grease for long-term lubrication and high temperatures

Application Klüber AMBLYGON TA 15-2

AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in conveyors; kilns (rotary tubular kilns); water pumps; hot rollers; tarmac laying machines; gate valves; seals; washing machines and dishwashers; impact mechanism in power tools; joints, hinges; king pins. AMBLYGON TA 15/2 is also used in combination with mineraloil-resistant elastomer seals.

Klüber Klüberplex BEM 41-141

Lubricant for rolling and plain bearings subject to high loads

Application Klüber Klüberplex BEM 41-141

Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations. Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

Klüber Klüberplex BEM 41-141 is particularly widely used in the wind industry for wind turbines.

Klüber Klüberfood 4 NH1-46

Synthetic hydraulic oils for the food and pharmaceutical industries

Application Klüber Klüberfood 4 NH1-46

Klüberfood 4 NH 1 hydraulic oils are used especially in the food-processing and pharmaceutical industries.

Klüber Klüberoil GEM 1-220 N

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology

Application Klüber Klüberoil GEM 1-220 N

Klüberoil GEM 1 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klüberoil GEM 1 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber Klüberplex BE 31-102

Lubricating greases for extreme requirements

Application Klüber Klüberplex BE 31-102

Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

Klüber Klübersynth CH 2-100 N

High-temperature chain oils

Application Klüber Klübersynth CH 2-100 N

The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards

Klüber Centoplex CX 4/375 AU

High-speed grease for gears

Application Klüber Centoplex CX 4/375 AU

Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders. At temperatures < 80°C long-term lubrication is possible.

Klüber Klüberbio AG 39-602

Environmentally acceptable adhesive lubricant for open gears and steel cables

Application Klüber Klüberbio AG 39-602

Klüberbio AG 39-602 was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water. The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity such as with low-speed plain bearings, guide rails and open winch gears.

Klüber Klüberbio LG 39-700 N

Eco-compatible operating lubricant for open gear drives

Application Klüber Klüberbio LG 39-700 N

Klüberbio LG 39-700 N was developed for the lubrication of open gear drives and rack-and-pinion drives as well as for sliding surfaces with high surface pressure. The product can be used in maritime applications requiring good eco-compatibility, a good anticorrosive effect and/or high load-carrying capacity, e.g. in open anchor winch drives, rack and pinions in jack-up lifting systems, slow-moving plain bearings, stern roller bearings on AHTS vessels or rudder systems.

Klüber Klübersynth UH1 64-62

Synthetic lubricating grease suitable for use in the food-processing and pharmaceutical industries

Application Klüber Klübersynth UH1 64-62

Klübersynth UH1 64-62 is suitable for lubrication points in machines and installations used in the food-processing and pharmaceutical industries, particularly for all points where contact between the lubricant and the food product cannot be excluded. We recommend lubricating all friction points with Klübersynth UH1 64-62 in order to avoid negative effects caused by lubricant spreading.

Klüber MICROLUBE GBU-Y 131

Special grease for the lubrication of rolling and plain bearings subject to humidity and water

Application Klüber MICROLUBE GBU-Y 131

MICROLUBE GBU-Y 131 is intended for the lubrication of plain and rolling bearings operating under medium to high loads as well as under the influence of humidity and water. MICROLUBE GBU-Y 131 has proven particularly successful for lubrication of the fixed or detachable rope grips of ski lifts.

Klüber Klübersynth PEG 46-121

Special greases for the lubrication of enclosed gear drives

Application Klüber Klübersynth PEG 46-121

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives. Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.

Klüber Presspate SEM 95/800 T

High-performance lubricants for cold forming of sheets and tubes

Application Klüber Presspate SEM 95/800 T

You may use PRESSPATE SEM 95/800 T and PRESSPATE TB for highly varied applications in cold metal forming, especially for sheet metal and tubes. This includes processes such as: drawing and deep drawing; bending; hydroforming; tube bending using a mandrel; calibrating sintered parts upon sintering Both products have been successfully used in the processing of alloys based on steel, stainless steel, brass, aluminium and titanium.