7 warehouses in Europe
Klüber
-
Klüber Klüberbeta H 7-1000
Quick orderingMore infoKlüber Klüberbeta H 7-1000
Silicone oils for high-temperature applications
Application Klüber Klüberbeta H 7-1000
These Klüberbeta oils are used especially on Hymmen doublebelt presses for the lubrication of the plastic sealing bars. Experience has shown that temperatures up to 250 °C are possible with continuous relubrication. Further applications: Maintenance and assembly aid for rubber and plastic parts; Sliding agent for plastic/metal friction pairings.
Show more€ 243,61 / L -
Klüber Grafloscon C-SG 500 Plus
Quick orderingMore infoKlüber Grafloscon C-SG 500 Plus
Adhesive lubricant
Application Klüber Grafloscon C-SG 500 Plus
GRAFLOSCON C-SG 500 PLUS can be used to lubricate open rolling drives (spur and bevel gears), slide and guide rails, large chain drives, etc., especially at high component temperatures. It is particularly suitable for rubbing seals (steel/steel) in rotary kilns or drums.
Show moreStarting at: € 32,69 / Kg -
Klüber Klüberfluid C-F 5 Ultra
Quick orderingMore infoKlüber Klüberfluid C-F 5 Ultra
Operational lubricant for large girth gear drives
Application Klüber Klüberfluid C-F 5 Ultra
Klüberfluid C-F 5 ULTRA can be applied by immersion, transfer paddle wheel, pressure fed circulation and total loss spray lubrication systems. It can be used with all gear sizes and power ratings. A peripheral speed of 8 m/s however should not be exceeded. Such drives are mostly found in rotary kilns, tube mills, drums and similar machinery used in the cement, lime, gypsum, mining and chemical industries as well as in coal-fired power stations. Further applications are found in sugar and paper production as well as in the marine and offshore sector.
Show moreStarting at: € 39,66 / Kg -
Klüber Klüberalfa DH 3-230
Quick orderingMore infoKlüber Klüberalfa DH 3-230
High-temperature lubricating oils for sintered metal plain bearings and plastic components
Application Klüberalfa DH 3-230
Sintered metal components Klüberalfa DH 3 oils are used for the impregnation of sintered metal plain bearings subject to high temperatures where longterm lubrication is required. Due to their high thermal and chemical stability, additional lubrication with, for example, MIKROZELLA is normally not necessary. Plastic components Klüberalfa DH 3 oils are suitable for the lubrication of both plastic components and metal-plastic sliding contact surfaces. These clear, colourless and odourless oils do not form unwanted resins. Klüberalfa DH 3 oils are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber), so no negative effect on the material is to be expected. Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show moreStarting at: € 886,52 / L -
Klüber Klüberoil 4 UH1-680 N
Quick orderingMore infoKlüber Klüberoil 4 UH1-680 N
Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Application Klüber Klüberoil 4 UH1-680 N
Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.
Show moreStarting at: € 51,32 / L -
Klüber Syntheso XOL 12
Quick orderingMore infoKlüber Syntheso XOL 12
Synthetic textile machine oil for the lubrication of spinning and twisting rings
Application Klüber Syntheso XOL 12
SYNTHESO XOL 12 is used for the lubrication of porous sintered metal rings. The product impregnates and evenly wets the sintered metal lubrication points. The lubricating film reduces wear to a minimum. SYNTHESO XOL 12 reduces yarn tension and traveller wear thus contributing to a reliable and economical operation of the textile machine.
Show moreStarting at: € 37,61 / L -
Klüber Structovis BHD MF
Quick orderingMore infoKlüber Structovis BHD MF
Mineral oil-based special lubricants
Application Klüber Structovis BHD MF
STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.
Show moreStarting at: € 106,58 / L -
Klüber Klüberalfa HL 3-150
Quick orderingMore infoKlüber Klüberalfa HL 3-150
High-performance PFPE oils for lifetime lubrication under extreme conditions
Application Klüber Klüberalfa HL 3-150
Klüberalfa HL 3 Fluids should be used where lifetime lubrication is desired in combination with stringent operational requirements, such as: – wide ranging extremes of temperature – high vacuum – influence by aggressive chemicals – compatibility with wide ranging elastomer types Thanks to their low evaporation rate, Klüberalfa HL 3 Fluids are also suitable for sensitive applications in clean rooms and in the optical and electronics sectors. When used in sintered metal plain bearings, Klüberalfa HL 3 Fluids excel by means of their low friction coefficients across a wide service temperature range. Behaviour towards elastomers and plastics Perfluorinated polyether oils (PFPE) are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). Nevertheless compatibility with the materials should be tested, especially prior to series application.
Show more€ 1 426,00 -
Klüber Hotemp Super N
Quick orderingMore infoKlüber Hotemp Super N
High-temperature oil for continuous particle board presses
Application Klüber Hotemp Super N
In the woodworking industry We have already gained vast, positive experience with the application of HOTEMP SUPER N in double-belt presses for the continuous production of fibre and particle boards or laminates, especially in the following systems: – ContiRoll® of Messrs. Siempelkamp – Conti-Panel-System of Messrs. Dieffenbacher – küsters press® of Messrs. Metso/Küsters These double-belt presses operate at high pressures and very high temperatures (>200 °C). The most complex lubrication points on the moving parts in the heating and compression area are: – steel belts, carpets of calibrated rollers, heating platens – roller bar chains – contact pressure and aligning chains – steel belts, beds of roller chains, heating platens Friction points, i.e. steel belts/roller bars or chain carpets are fully exposed to the heating/compressing temperature. Due to the thermal radiation, the other chains are subject to temperatures ranging from approx. 150 to 180 °C.
Show moreStarting at: € 37,61 / L -
Klüber Klübersynth CZ 2-85
Quick orderingMore infoKlüber Klübersynth CZ 2-85
Special oil for chain pin lubrication and chain cleaning in film stretchers
Application Klüber Klübersynth CZ 2-85
Klübersynth CZ 2-85 is a fully synthetic high-temperature oil that was especially developed for lubricating and cleaning conveyor chain sliding systems and pins in biaxial high-speed film stretchers. One of our customers was able to achieve energy savings of 33 % by using Klübersynth CZ 2-85, which led to a drop in energy costs amounting to approximately EUR 18,000 (0.09 EUR/KW). Reduced downtime, reflected by an increase in productivity, can also be expected.
Show moreStarting at: € 58,23 / L -
Klübersynth GH 6-46
Quick orderingMore infoKlübersynth GH 6-46
Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology
Application Klübersynth GH 6-46
Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains
Show moreStarting at: € 20,34 / L -
Klüber Hotemp Super N Plus
Quick orderingMore infoKlüber Hotemp Super N Plus
High-temperature oil for continuous wood panel presses
Application Klüber Hotemp Super N Plus
For use in continuous belt presses manufacturing fibreboard, such as particle, MDF, HDF, OSB or LVL boards. The product has been designed especially for use in the following systems: ContiRoll® of Messrs. Siempelkamp Conti-Panel-System of Messrs. Dieffenbacher küsters press®/contipressTM of Messrs. Metso/Küsters Complex lubrication points in the heating and compression area are: – steel belts, roller rod carpets, heating platens – roller bar chains – contact-pressure and alignment chains or – steel belts, beds of special roller chains, heating platens The friction points, i.e. steel belts & roller rods, are fully exposed to heating and compression temperatures. Chains are exposed to radiant heat typically at temperatures of 160 °C to 190 °C. The other chains, pins and bending rods are lubricated with other HOTEMP SUPER products depending on machine design and operating conditions.
Show moreStarting at: € 35,27 / L -
Klüber BARRIERTA KM 192
Quick orderingMore infoBARRIERTA KM 192
High-temperature and long-term lubricants with good resistance to low temperatures
Application BARRIERTA KM 192
Rolling bearings and guideways BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads. Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond. BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering. Valves and seals The BARRIERTA K greases good temperature resistance and their compatibility with plastics and elastomers – which is typical of PFPE lubricants – make them highly suitable for the lubrication of engine valves and seals as are found in hydraulic cylinders. BARRIERTA K greases enable long runtimes with low noise generation and low friction coefficients. The resistance of BARRIERTA KM 192 against brake fluids, type DOT 3, 4, 5 and 5.1, has been confirmed in an individual test. Compatibility with elastomers and plastics BARRIERTA K grease stand out for their neutral behaviour towards elastomers and plastics. Owing to the many different varieties of elastomers and plastics and varying operating conditions, we recommend checking their compatibility with the component material prior to series application.
Show moreStarting at: € 1 013,16 / Kg -
Klüber Wolfracoat C Fluid
Quick orderingMore infoKlüber Wolfracoat C Fluid
High-temperature lubricating compound
Application Klüber Wolfracoat C Fluid
WOLFRACOAT C FLUID was developed as a lubricating compound for surfaces subject to high thermal loads, as e.g. in rotary kilns in the base material industry (chemical industry, cement, ore processing, etc.) between the inner surfaces of the tyres and the kiln shell’s slide elements as well as the running surfaces of the axial supports. WOLFRACOAT C FLUID is also suitable for the lubrication of pouring ladles used in the steel industry, and could also be used as a screw compound for hightemperature bolt and screw connections.
Show moreStarting at: € 50,32 / L -
Klüber Tyreno Fluid 3/6V
Quick orderingMore infoKlüber Tyreno Fluid 3/6V
High-performance vacuum pump oils for fine- and high-vacuum applications
Application Klüber Tyreno Fluid 3/6V
Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.
Show moreStarting at: € 1 314,02 / L -
Klüber Klübersynth CFH 2-400
Quick orderingMore infoKlüber Klübersynth CFH 2-400
Special high-temperature oil for sliding chain systems operating at very high speeds in biaxial film stretchers made by Brückner Maschinenbau
Application Klüber KKlübersynth CFH 2-400
Klübersynth CFH 2-400 is a fully synthetic high-temperature oil that was especially developed for the requirements of conveyor chain sliding systems and pins in biaxial high-speed film stretchers running at speeds > 450 m/min. Oven temperatures may be higher than 200 °C in these applications.
Show moreStarting at: € 75,77 / L -
Klüber Klübersynth DB 2-32
Quick orderingMore infoKlüber Klübersynth DB 2-32
Synthetic impregnating oils for sintered metal plain bearings
Application Klüber Klübersynth DB 2-32
Klübersynth DB 2 oils were developed for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.
Show moreStarting at: € 63,33 / L -
Klüber Hotemp Super C 2-50
Quick orderingMore infoKlüber Hotemp Super C 2-50
High-temperature oil for the lubrication of roller bar chains
Application Klüber Hotemp Super C 2-50
HOTEMP SUPER C 2-50 is recommended and used for the lubrication of roller bar chains and bending rods/pins in continuous presses of Messrs. Dieffenbacher and Siempelkamp (year of construction 1993 – 1998).
Show moreStarting at: € 66,85 / L -
Klüber Klüberalfa YV 93-1202
Quick orderingMore infoKlüber Klüberalfa YV 93-1202
Premium sliding agent for valves, fittings and installations carrying oxygen under very high partial pressure
Application Klüber Klüberalfa YV 93-1202
Klüberalfa YV 93-1202 is used as a sliding agent for the lubrication of valves, fittings and installations carrying gaseous and/or liquid oxygen, in individual cases subject to gas pressures considerably above 300 bar, or in chemical installations and equipment requiring high resistance to various gases. (Conclusion by analogy based on chemical composition. We recommend users conduct their own component tests using the complete component under conditions similar to series application). The product's high pressure-absorption capacity and consistent friction values over a wide temperature range ensure constant actuation forces. Test results show the product's usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Possible applications are: – Oxygen valves – Peripheral aggregates of chemical installatons – Hose couplings, e.g. oxygen pipe connections, sliding and plain bearings, bolts, slideways, etc. – Steel and heavy industry – Assembly aid for most rubber-elastic materials and plastics – For industrial handling, maintenance and care of oxygen components Behaviour towards metal, elastomers and plastics Klüberalfa YV 93-1202 is normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the sliding agent with materials prior to the introduction of this product.
Show more€ 1 994,20 / Kg -
Klüber Klübersynth CHZ 2-225
Quick orderingMore infoKlüber Klübersynth CHZ 2-225
Special high-temperature oil for minimum residue formation in sliding chain systems in biaxial film stretchers
Application Klüber Klübersynth CHZ 2-225
Klübersynth CHZ 2-225 is a fully synthetic high-temperature oil that was especially developed for the requirements of conveyor chain sliding systems and pins in biaxial high-speed film stretchers. Oven temperatures may be higher than 200 °C in these applications. The machine may run at high speed.
Show moreStarting at: € 90,70 / L
Küber lubricants
High-performance Klüber oils and greases for optimal lubrication of assets. Resulting in higher reliability, less time spent on maintenance and lower lubricant consumption. With a lower cost to operate, fewer breakdowns, more performance, more output and a better result. Also food safe or biodegradable if required, with the official registrations and certifications.
What makes Klüber lubricants so good?
Klüber is the specialist for special greases and oils. I think there is no other brand with such a broad portfolio of lubricating greases as Klüber. Kluber's portfolio already includes more than 10,000 products. Therefore, you often see very high-quality and very specific products in their portfolio. The price of this specialist in lubricants is high, but fortunately very small packages are available.
My machine supplier prescribes Klüber lubricants. Should I use these?
Klüber has an extremely good relationship with these OEMs and has often looked very closely at the needs and requirements of these machine builders. Therefore, it is not always obvious to select a general product. In addition, warranty also plays an important role. If the consumption is not very high, we would save you the trouble of looking for an alternative.
Where can I buy Klüber oil in United Kingdom?
The easiest way is online! OilOnline delivers Klüber oil and greases in the whole Benelux. They are specialised in business use, but the private individual can also buy directly from the wholesaler.
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt