Klüber

Klüber Unimoly GL 82

Lubricating grease containing MoS2

Application Klüber Unimoly GL 82

UNIMOLY GL 82 is a rolling and sliding bearing grease for machines and appliances exposed to extreme loads; it meets the general requirements and specifications set forth by automobile manufacturers. UNIMOLY GL 82 can also be used for wheel bearings in rail and road vehicles.

Klüber Klüberlub BE 41-542

Heavy-duty grease for high-load rolling bearings

Application Klüber Klüberlub BE 41-542

Typical Klüberlub BE 41-542 applications are in high-load rolling bearings operating at low to medium speeds such as for load rollers in rotary kilns for the cement industry, crane wheels, bucket wheel excavators, hammer crushers, hammer mills, work rolls in hot strip mills, cold pilger rolling mills, and rolling bearings subject to shock or pulsating stress.

Klüber Summit PS 300

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 300

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Klüber Klübersynth EG 4-150

Synthetic high-performance gear oil

Application Klüber Klübersynth EG 4-150

Klübersynth EG 4 was especially developed for the lubrication of heavily loaded spur, bevel and planetary gears. It can also be used for the lubrication of worm gears. Klüberoil EG 4 can also be selected for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps.

Klüber ISOFLEX NBU 15

Spindle bearing grease

Application Klüber ISOFLEX NBU 15

ISOFLEX NBU 15 is primarily used for spindle bearings and high-speed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a long-term grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines, electromechanical valve actuators).

Klüber ISOFLEX TOPAS NB 152

Synthetic rolling and plain bearing greases

Application Klüber ISOFLEX TOPAS NB 152

ISOFLEX TOPAS NB 52 is a versatile grease for many applications, e.g.

• rolling and plain bearings subject to high speeds and loads, also for low temperatures,
• tooth flanks in precision gears, e.g. bevel gears in milling machines, electromechanical actuators for valves,
• electric contacts and components to reduce insertion forces.

In addition, ISOFLEX TOPAS NB 152 is compatible with many plastics. ISOFLEX TOPAS NB 152 is primarily used for rolling and plain bearings, for example wheel bearings in racing cars, fan bearings, pump bearings. The grease is also suitable for plastic/ plastic or steel/plastic friction points.

Klüber Klübersynth CHX 2-220

High-temperature chain oil for transport- and conveyor chains in the automotive industry

Application Klüber Klübersynth CHX 2-220

Klübersynth CHX 2-220 was developed for chain lubrication at high temperatures from 120 °C to approx. 250 °C. The product is used for the lubrication of the conveyor chain and the oven chain in cathodic immersion painting as well as for all other chain applications in the car body paint section.

Klüber Klüberfood NH1 C 8-80

Semi-synthetic oil for chains in high humid process areas for the food-processing industry

Application Klüber Klüberfood NH1 C 8-80

Klüberfood NH1 C 8-80 may be applied via a suitable chain lubrication system. Mixing of Klüberfood NH1 C 8-80 oil with other incompatible or non-food-grade lubricants should be avoided!

Klüber PARALIQ GB 363

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries

Application Klüber PARALIQ GB 363

PARALIQ GB 363 can be used for beverage taps, especially beer taps of all kind, equipped with NBR seals or other elements made of NBR. It does not impair the formation of beer froth or the taste of beer. PARALIQ GB 363 is also suitable for filling installations, filters, stuffing boxes, rubber membranes or seals.

Klüber Klüberoil 4 UH1-460 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-460 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

Klüber Klübersynth UH1 6-220

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology

Application Klüber Klübersynth UH1 6-220

Klübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings. It can also be used for the lubrication of lifting, drive and transport chains.

Klüber PETAMO GHY 443

High-temperature and long-term lubricant for rolling bearings subject to high loads

Application Klüber PETAMO GHY 443

For the initial and relubrication of rolling and plain bearings subject to high temperatures in general machinery, electric motors, load rollers in conveyors, roller bearings and continuous wood panel presses, load rollers in continuous casting machines and many other applications.

Klüber Klübersynth DB 2-68

Synthetic impregnating oils for sintered metal plain bearings

Application Klüber Klübersynth DB 2-68

Klübersynth DB 2 oils were developed for the lubrication of sintered metal plain bearings used in precision engineering, electrical engineering, the automotive sector and household appliances.

Klüber Klübertherm HB 88-182

Rolling bearing grease for high loads and temperatures

Application Klüber Klübertherm HB 88-182

Applications include the long-term lubrication of rolling bearings subject to high temperatures and loads. Klübertherm HB 88-182 offers you even more and by buying a single grease, you will obtain a variety of strong benefits for applications under highly varied conditions and bearing designs. These include: Rolling bearing applications in corrugating machines, rotary unions, generator bearings, conveyors, hydraulic couplings, smoke extractor motors, and ceramic ovens; Lifetime lubrication of cylindrical roller bearings with a high percentage of sliding friction; Sealing systems in the automotive industry

Klüber Tyreno Fluid M-100V

for low and fine vacuum applications (mech. backing pumps)

Application Klüber Tyreno Fluid M-100V

Working fluid for universal application in oil-sealed vacuum pumps extracting air, noble gases, but not oxygen. Klüber Tyreno Fluid M-100V achieves a final pump pressure of approx. 10–3 mbar measured in double-stage backing pumps.

Klüber Summit FG 500

Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Application Klüber Summit FG 500

Klüber Summit FG oils can be used as vacuum pump oils, evacuating air or inert gases if a food grade oil is required. Klüber Summit FG oils can be used for oil-injected screw-type compressors, reciprocating piston compressors and rotary vane compressors. Klüber Summit FG oils are intended for use in compressors of the food-processing and pharmaceutical industries requiring oilfree compressed air (without oil vapour, which cannot be removed by the oil separator). These oils are also suitable for gear lubrication in oil-free screwtype compressors.

Klüber ASONIC GHY 72

Synthetic lubricating grease for long-term or lifetime lubrication of rolling bearings

Application Klüber ASONIC GHY 72

ASONIC GHY 72 is particularly beneficial for the long-term or lifetime lubrication of parts exposed to a wide service temperature range, e.g. ball bearings in electric motors, fans, air conditioners, automobile generators, computers, CD drives as well as household appliances and office equipment.