Klüber

Klüber Airpress 15

Special oil for industrial installations and airless systems

Application Klüber Airpress 15

AIRPRESS oils can be used for pneumatic systems, e.g. compressed air appliances, air systems in weaving machines, air tubes and for extending the service life of friction points like cylinders, valves and tappets. These oils are also suitable for the lubrication of spiral cutters removing lint from textiles and for chains or guides. AIRPRESS oils can be used for applications subject to high air humidity and or weak vapours of alkaline and acid solutions. AIRPRESS 15, 32 and 68 have proven effective in gears subject to minor loads and oil-lubricated bearings, e.g. in knitting machines or oil circulation systems, e.g. spherical roller bearings, and for hydraulic systems and components of airless systems.

Klüber Airpress 32

Special oil for industrial installations and airless systems

Application Klüber Airpress 32

AIRPRESS oils can be used for pneumatic systems, e.g. compressed air appliances, air systems in weaving machines, air tubes and for extending the service life of friction points like cylinders, valves and tappets. These oils are also suitable for the lubrication of spiral cutters removing lint from textiles and for chains or guides. AIRPRESS oils can be used for applications subject to high air humidity and or weak vapours of alkaline and acid solutions. AIRPRESS 15, 32 and 68 have proven effective in gears subject to minor loads and oil-lubricated bearings, e.g. in knitting machines or oil circulation systems, e.g. spherical roller bearings, and for hydraulic systems and components of airless systems.

Klüber Isoflex PDP 10

Synthetic long-term oils

Application Klüber Isoflex PDP 10

ISOFLEX PDP oils are ideally suited for lubrication points which have to meet high demands and show a long service life. They can be used for rolling bearings subject to high thermal and static loads, even at high speeds, plain bearings, guides in communication equipment, radio-probes, precision and measuring instruments, control systems, turbines, synchronous motors and elements with exacting tolerance in the fields of telecommunication, data systems and cryotechnology. Furthermore, ISOFLEX PDP oils are suitable for the impregnation of sintered bearings and sintered compacts. ISOFLEX PDP 61 A Fernschreib. K has been especially designed for mechanically actuated friction points in teletypewriters.

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Klübersynth BEP 72-82

Rolling bearing grease for long-term lubrication

Application Klüber Klübersynth BEP 72-82

Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klüber ASONIC GLY 32

Low-temperature lubricating grease for high-speed, low-noise rolling bearings

Application Klüber ASONIC GLY 32

ASONIC GLY 32 is used, for example, for the long-term or lifetime lubrication of rolling bearings in electric motors in applications where a low starting-up torque at low temperatures is required. As examples of the multitude of highly specialised applications of ASONIC GLY 32, the following may be mentioned:

• miniature and small bearings in fans, motors and pumps contained in precision equipment household appliances and automobile air conditioners
• integrated bearing units in audio and video equipment, computer peripherals and office equipment

Klüber STABURAGS NBU 12/300 KP

Long-term grease for rolling and plain bearings

Application Klüber STABURAGS NBU 12/300 KP

STABURAGS NBU 12/300 KP is a rolling bearing grease for long-term and lifetime lubrication of drafting equipment in spinning machines (upper and lower rollers), tension and eccentric rollers, cardan shafts and rolling bearings in fans and ventilation systems.

Klüber Klüberquiet BQR 78-102

Low-noise rolling bearing grease for long-term lubrication

Application Klüber Klüberquiet BQR 78-102

Klüberquiet BQR 78-102 is primarily used to lubricate sealed ball bearings in electric motors, fans or similar applications in cars, where they have to offer a long service life at aboveaverage permanent temperatures while preventing noise generation.

Klüber POLYLUB GLY 791

Special synthetic lubricating grease for plain bearings subject to high loads and temperatures

Application Klüber POLYLUB GLY 791

Vehicles: Seat mechanisms, shock absorbers Slideways, plain bearings: For many types of plain bearing designs. POLYLUB GLY 791 prevents stick-slip to a large extent, particularly in applications where normally a hydrodynamic film cannot form. Owing to the good damping properties, noise and cracking is considerably reduced.

Klüber Catenera Fluid FT 2

Escalator chain oil

Application Klüber Catenera Fluid FT 2

CATENERA FLUID FT 2 has been especially designed for the lubrication of chains in escalators and passenger conveyors.

Klüber Klüberpress HF 2-102

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-102

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klüberpress HF 2-103

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-103

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber UNISILKON L 50/2

High-temperature grease for a wide service temperature range

Application Klüber UNISILKON L 50/2

UNISILKON L 50/2 is a long-term lubricating grease for rolling bearings subject to high thermal stress. It has proven effective in applications in the wood, textile and paper industries. UNISILKON L 50/2 can also be used for plain bearings in metal/ plastic material combinations and as assembly aid for rubber parts like seals. UNISILKON L 50/2 is resistant to hot and cold water and water vapour. It is not resistant to most organic solvents, strong acids and alkaline solutions.

Klüber ISOFLEX SUPER LDS 18

High-speed and smooth-running grease

Application Klüber ISOFLEX SUPER LDS 18

ISOFLEX SUPER LDS 18 is suitable for plain and rolling bearings, small, miniature and precision bearings, for precision mechanical and optical equipment and low-temperature applications. It can also be used as an anti-corrosion and anti-wear lubricant in electrical contacts. Properly applied, ISOFLEX SUPER LDS 18 protects against corrosion and oxidation, improves sliding properties and reduces wear, e.g. in sliding contacts and potentiometers.

Klüber Structovis EHD

Mineral oil-based special lubricants

Application Klüber Structovis EHD

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Klüber Klüberpress HF 2-104

Special lubricating oils for hot pressing

Application Klüber Klüberpress HF 2-104

Klüberpress oils are particularly suitable for the manufacture of pressed parts made of brass or nonferrous metals, such as spherical valves; gas pipe joints; construction elements in general; furniture fittings. The good lubricating properties of Klüberpress allow the production of pressed parts of different sizes between 50 and 12,000 g and ensure a high pressing capacity (short cycle times).

Klüber Klüberalfa MR 3

Universal sliding fluid for seals, guideways and plastic friction points

Application Klüber Klüberalfa MR 3

Due to its good compatibility, Klüberalfa MR 3 may be used in combination with most materials, e.g. leather, textile or plastic, in car interiors or on the car body. Klüberalfa MR 3 is compatible with most thermoplastics or thermosetting plastics used, for example, in dashboards, seat and sunroof sliding rails, arm rests, seat adjustment mechanisms, door and sunroof seals. Perfluorinated polyether oils are generally regarded as neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.

Klüber ISOFLEX TOPAS L 3/600

Synthetic fluid grease

Application Klüber ISOFLEX TOPAS L 3/600

Fluid grease, e.g. for the dip-feed lubrication of rolling and plain bearings, gears, worms and bolts.

Klüber Klüberfluid 9 R 100

Assembly and anticorrosion fluid

Application Klüber Klüberfluid 9 R 100

Klüberfluid 9 R 100 is particularly suitable for automotive brake components. It can also be used as an anticorrosion agent for steel parts, protecting them while in stock and during transport between production and assembly, with the advantage that it does not have to be removed prior to the fitting of SBR and EPDM elastomer parts. When used as an assembly fluid, Klüberfluid 9 R 100 facilitates the precise joining of individual components and thus supports functional reliability, preventing damage to the seals during fitting. Klüberfluid 9 R 100 is used as an assembly aid, anticorrosion agent and functional lubricant, e.g. to attain the roll-back effect of brake pistons. Its excellent wetting properties in conjunction with high lubricity have a favourable effect on initial friction, especially when metal and elastomer materials are paired.