7 warehouses in Europe
Klüber Summit
-
Klüber Summit HySyn FG 46
Quick orderingMore infoKlüber Summit HySyn FG 46
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 46
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 24,98 / L -
Klüber Summit NGSH 150
Quick orderingMore infoKlüber Summit NGSH 150
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 150
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: € 27,46 / L -
Klüber Summit SH 46 XS
Quick orderingMore infoKlüber Summit SH 46 XS
Synthetic air compressor oil enabling oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 46 XS
Klüber Summit SH 46 SX was especially developed for the lubrication of highly loaded rotary screw compressors which require an oil formulated without the use of silicone raw materials. Klüber Summit SH 46 XS is intended for oil-injected rotary screw compressors with oil change intervals of up to 10,000 operating hours. Used compressors can be switched over from conventional mineral oils to Klüber Summit SH 46 XS. Klüber Summit SH 46 XS is neutral towards most elastomers typically used in air compressors - no leakage is to be expected. Klüber Summit SH 46 XS offers very good oxidation stability due to the synthetic base oil, thus minimising oxidation residues in the compressor and extending oil change intervals and the service life of the oil separator. The product contains special inhibitors to largely prevent the formation of residues in the compressors. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content in the compressed air.
Show more€ 37,89 / L -
Klüber Summit DSL 100
Quick orderingMore infoKlüber Summit DSL 100
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 100
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 28,22 / L -
Klüber Summit HySyn FG 32
Quick orderingMore infoKlüber Summit HySyn FG 32
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 32
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 29,57 / L -
Klüber ISOFLEX LDS 18 SPECIAL A
Quick orderingMore infoKlüber ISOFLEX LDS 18 SPECIAL A
Dynamically light, long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Show moreStarting at: € 26,37 / L -
Klüber Summit SH 55
Quick orderingMore infoKlüber Klüber Summit SH 55
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Klüber Summit SH 55
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 27,66 / L -
Klüber Summit NGSH 220
Quick orderingMore infoKlüber Summit NGSH 220
Synthetic gas compressor lubricants
Application Klüber Summit NGSH 220
Klüber Summit NGSH are designed for rotary screw and reciprocating compressors in natural gas service. Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.
Show moreStarting at: € 27,84 / L -
Klüber Summit LCG 68
Quick orderingMore infoKlüber Summit LCG 68
Synthetic compressor oils for acidic and reactive gases such as landfill and biogases.
Application Klüber Summit LCG 68
The Klüber Summit LCG 68 was developed for application in screw-type compressors working with natural gases or the reactive and corrosive gases encountered in biogas plants, refineries, EOR processes or the chemical industry. Klüber Summit LCG 68 compressor oils do not contain sulphur or any other elements that might react with chlorine-containing components or acidic gases. They can also be used with gases containing chlorine where mineral oils, esters or polyglycols are not suitable for application. Klüber Summit LCG 68 compressor oils protect surfaces against the corrosive effects of acidic gases such as hydrogen sulphide or carbon dioxide. To select the right viscosity, the composition of the gas flow and all other operating conditions have to be known in detail
Show moreStarting at: € 24,16 / L -
Klüber Summit Varnasolv
Quick orderingMore infoKlüber Summit Varnasolv
Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Application Klüber Summit Varnasolv
Klüber Summit Varnasolv has been especially designed for cleaning screw-type compressors, hydraulic systems, gears and other oil circulating systems like calenders. The conditioner can be used for oils based on mineral oil, synthetic hydrocarbon, ester oil and polyglycol. Using mineral oils in oil-injected screw-type and sliding vane compressors may lead to varnish and carbon buildup in the entire oil circuit or form sticky residues on valves and hot surfaces in hydraulic systems. This often results in increased energy consumption, sticky valves, clogged oil lines and filters and increased downtime due to maintenance. Klüber Summit Varnasolv is a concentrated conditioner fluid which dissolves varnish and carbon buildups during operation and keeps them suspended in the compressor oil. Therefore, it is no longer necessary to dismantle the system for cleaning. The oil containing the residues is completely drained before refilling the unit with fresh oil.
Show more€ 41,64 / L -
Klüber Summit DSL 32
Quick orderingMore infoKlüber Summit DSL 32
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 32
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 18,70 / L -
Klüber Summit R 300
Quick orderingMore infoKlüber Summit R 300
Synthetic compressor oils, particularly for highly loaded ammonia and CO2 refrigeration plants
Application Klüber Summit R 300
Klüber Summit R series lubricants have been designed especially for highly loaded screw-type and reciprocating piston compressors which are operated with ammonia (R717) or CO2 (R744). These lubricants can also be used with natural hydrocarbon refrigerants like propane (R290), propylene (R1270) or butane (R600). Especially with these refrigerants, the solubility of the gas in the oil under operating conditions and the resulting drop in viscosity has to be taken into account. Klüber Lubrication would be pleased to assist you in selecting the most appropriate oil. Due to the synthetic base oil contained in the Klüber Summit R series lubricants, oil carryover into the refrigeration cycle is much lower than with conventional mineral oils, which helps to reduce oil consumption. The viscosity of the oils remains constant for a long time, due to the fact that only a few highly volatile fractions are contained in the oil. Oil changes due to the increase in viscosity can be extended considerably. The base oil offers high chemical stability, particularly to ammonia, the typical blackening of conventional mineral oils or deposits in the refrigeration cycle are prevented. Our experience gained in practice has shown that Klüber Summit 200 can be used for evaporating temperatures as low as ≥-50°C depending on the operating conditions.
Show moreStarting at: € 32,51 / L -
Klüber Summit RPS 52
Quick orderingMore infoKlüber Summit RPS 52
Synthetic compressor oil based on polyglycol for ammonia refrigerating plants using dry evaporation
Application Klüber Summit RPS 52
Klüber Summit RPS 52 has been designed especially for the lubrication of screw-type compressors in refrigerating plants using ammonia (R 717) and dry evaporation. Unlike mineral oils and polyalphaolefins, Klüber Summit RPS 52 is miscible with ammonia, thus the oil entrained in the refrigeration cycle is recycled to the compressor together with the refrigerant. Therefore, it is no longer necessary to have oil catches in the refrigeration cycle, like in the case of nonmiscible oils. Especially in the evaporator of the refrigeration cycle such miscibility helps to reliably recycle the oil to the compressor at low evaporator temperatures. Owing to the synthetic base oil of Summit RPS 52 oil carryover into the refrigeration cycle is much lower than with conventional mineral oils. Therefore, oil-related problems in the refrigeration cycle are prevented right from the beginning. The base oil of Klüber Summit RPS 52 stands out for its stability to ammonia – the typical blackening of conventional mineral oils or deposits in the refrigeration cycle are prevented and oil change intervals can be extended considerably. Our experience gained in practice has shown that Klüber Summit RPS 52 can be used for evaporating temperatures as low as -40°C depending on the operating conditions. Klüber Summit RPS 52 protects against wax-like deposits, thus increasing the efficiency of the refrigeration plant.
Show moreStarting at: € 33,62 / L -
Klüber Summit SH 100
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 32,66 / L -
Klüber Summit PGI 150
Quick orderingMore infoKlüber Summit PGI 150
Synthetic gas compressor lubricants
Application Klüber Summit PGI 150
Klüber Summit PGI compressor lubricants are designed for rotary screw and piston compressors used in the compression of propane. They are also suitable for refrigeration compressors where propane is the refrigerant. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representatives for specific viscosity recommendations.
Show moreStarting at: € 35,99 / L -
Klüber Summit PGS 100
Quick orderingMore infoKlüber Summit PGS 100
Synthetic gas compressor oils
Application Klüber Summit PGS 100
Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Show moreStarting at: € 35,99 / L -
Klüber Summit PGS 150
Quick orderingMore infoKlüber Summit PGS 150
Synthetic gas compressor oils
Application Klüber Summit PGS 150
Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Show moreStarting at: € 35,99 / L -
Klüber Summit PGS 68
Quick orderingMore infoKlüber Summit PGS 68
Synthetic gas compressor oils
Application Klüber Summit PGS 68
Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas. Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases. Because of the variety of gas stream compositions and other operating conditions, please contact your local Klüber sales representative for specific viscosity recommendations.
Show moreStarting at: € 35,99 / L -
Klüber Summit HySyn FG 68
Quick orderingMore infoKlüber Summit HySyn FG 68
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Application Klüber Summit HySyn FG 68
Klüber Summit HySyn oils can be used for oil-injected screwtype compressors, reciprocating piston compressors and centrifugal compressors. Klüber Summit HySyn FG oils are intended for use in compressors of the food-processing and pharmaceutical industry requiring oil-free compressed air (without oil vapour which cannot be removed by the oil separator). Klüber Summit HySyn FG oils can also be used for the lubrication of gears in oil-free screw-type compressors. Owing to their good stability, these oils are also suitable for lowtemperature applications in industrial gears. Furthermore, Klüber Summit HySyn FG 32-46-68 oils are used in chains, particularly those operating at low temperatures, e.g. in freezing tunnels.
Show moreStarting at: € 28,32 / L -
Klüber Summit Supra 32
Quick orderingMore infoKlüber Summit Supra 32
Fully synthetic air compressor oils based on polyglycol
Application Klüber Summit Supra 32
Klüber Summit Supra Coolant and Klüber Summit Supra 32 have been especially designed for oil change intervals up to 8,000 operating hours in oil-injected screw-type compressors which are prefilled by the manufacturer with polyglycol oil. Due to the specific viscosity and special formulation, Klüber Summit Supra 32 is also suitable for the lubrication of turbocompressors. Klüber Summit Supra 26 N was especially developed for turbocompressors in order to meet the OEMs' viscosity requirements. An oil change interval of up to 40,000 operating hours is possible for turbocompressors, depending on the operating conditions. To enable Klüber Summit Supra 26 N achieve this oil service life it is indispensable to perform an oil condition monitoring every six months. Without prior oil analysis no conclusion can be drawn on the oil's suitability for further use. Klüber Summit Supra oils can be mixed with other polyglycol oils and the Klüber Summit Ultima series. The products are not miscible with mineral oils and synthetic hydrocarbon oils.
Show moreStarting at: € 37,63 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt