7 warehouses in Europe
Klübersynth H2 C 2-260
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Klüber Klübersynth H2 C 2-260
High-temperature chain oil for spiral ovens
Application Klüber Klübersynth H2 C 2-260
Klübersynth H2 C 2-260 is intended for use on chains exposed to high temperatures in spiral ovens used in bread/bun baking as well as meat/poultry cooking. These chains are exposed to sliding and rolling friction typically prevailing in traditional roller and skate chains and their guide rails. Klübersynth H2 C 2-260 is used for a sustained temperature of 250 °C while still providing a sufficient lubricating film for the rollers, balls, pins and rails.
Performance, Features & Benefits of Klüber Klübersynth H2 C 2-260 are:
- Reduced energy con-sumption and wear
- Low evaporation loss, thus reduced oil consumption, fume formation, and contamination
- Good adhesion and spreading properties, therefore better penetration and coating within the lubricating points
- Good load carrying capabilities
- Increased chain life, thus reduced capital expenditure
- Reduced residues without lacquer-like build-ups
- Easier chain cleaning, thus less downtime for routine maintenance
If you have any questions, please contact OilOnline Technical Helpdesk
Product Description Klüber Klübersynth H2 C 2-260
Klübersynth H2 C 2-260 is a special high-temperature oil developed for chains exposed to very elevated temperatures. The special additive combination contained in Klübersynth H2 C 2-260 allows a controlled wear protection and provides a stable lubricating film.
Typical Characteristics
| Product specifications | Method |
Klüber Klübersynth H2 C 2-260 |
|
| Article number | 002045 | ||
| Chemical composition, type of oil | ester oil | ||
| Chemical composition, type of oil | synthetic hydrocarbon oil | ||
| Upper service temperature | 250 °C / 482 °F | ||
| Appearance | clear | ||
| Colour space | yellow | ||
| Density | 20 °C | DIN 51757 | approx. 0.91 g/cm³ |
| Kinematic viscosity, lower limiting value | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | 240 mm²/s |
| Kinematic viscosity, upper limiting value | 40 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | 280 mm²/s |
| Kinematic viscosity, lower limiting value |
100 °C |
DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | 27.4 mm²/s |
| Kinematic viscosity, upper limiting value | 100 °C | DIN 51562 pt. 01/ASTM D-445/ASTM D 7042 | 30.4 mm²/s |
| Viscosity index | DIN ISO 2909 | <= 140 | |
| Flash point, Cleveland, open-cup apparatus | >= 260 °C | DIN EN ISO 2592 | |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. |
36 months |
Application notes
According to experience gained on test rigs and from practice, Klübersynth H2 C 2-260 does not form any lacquer-like residues when correctly applied. Chains and rails should always be coated with a thin film of oil. In the case of irregularly lubricated points subject to excessive heat, powdery residues may form. When fresh oil is applied at the recommended intervals, the residue will regenerate, thus ensuring a return to normal lubrication.
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
