Mobil

Mobil Vacuoline 137

Circulating Oils

Application Mobil Vacuoline 137

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 148

Circulating Oils

Application Mobil Vacuoline 148

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 546

Circulating Oils

Application Mobil Vacuoline 546

These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. The Mobil Vacuoline 500 series possess good demulsibility that is retained under conditions of severe water contamination. Mobil Vacuoline 500 series are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified. They are particularly resistant to the effects of prolonged high temperature exposure and perform well in circulating systems with short oil residence times. Typical applications include: No Twist Rod Mills. Moderate duty spur, bevel, helical and herringbone gear units. Circulating systems. Mobil Vacuoline 525, 528, 533 can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required. Certain compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150oC , not suitable for breathing air compressors

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

Mobil DTE 846

Superior Performance Turbine Oils

Application Mobil DTE 846

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil DTE 10 Excel™ 22

Mobil Industrial Premium Quality Hydraulic Oils

Most important applications of Mobil DTE 10 Excel™ 22 are:

• + Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• + Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• + Systems where cold start-up and high operating temperatures are typical
• + Systems requiring a high degree of load-carrying capability and anti-wear protection
• + Machines employing a wide range of components using various metallurgy

Pay attention! Price of Mobil DTE 10 Excel™ 22 drops automatically with higher volumes.

Mobil DTE PM 150

Paper Machine Lubricants

Application Mobil DTE PM 150

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings

Mobil GARD 560 VS

Diesel Engine Cylinder Oil

Application Mobil GARD 560 VS

Mobilgard 560 VS has been developed for marine crosshead engines designed for increased power and fuel efficiency. Mobilgard 560 VS has also demonstrated excellent performance in earlier engine designs and during slow speed steaming operation.

Mobilgard L540

Diesel Engine Cylinder Oil

Application Mobilgard L540

Mobilgard L540 has been developed for marine crosshead engines with increased power and fuel efficiency. Such engines exhibit higher temperatures and pressures in the cylinder, which reduce the lubricant's viscosity and increase the loads which it must withstand. Longer piston strokes have greatly increased the amount of surface to be protected and the amount of time the lubricant must withstand the severe cylinder temperatures and corrosive sulphur acids. Mobilgard L540 has also demonstrated superior performance in earlier engine designs. To ensure achieving the maximum equipment life possible, particular attention should be paid to the manufacturer's special recommendations regarding the running-in of new rings and liners. Mobilgard L540 was specially formulated for use in applications with fuel sulphur levels ranging from less than 0.3% up to 1.5%. Applications where the sulphur level is above 1.5% require special consideration and should be discussed with your ExxonMobil representative. Appropriate feed rates should be verified in all cases by through-the-ports inspection of liners to ensure adequate oil film.

Mobil DTE 832

Superior Performance Turbine Oils

Application Mobil DTE 832

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil SOMENTOR AH 45

Fully Compounded Cold Rolling Oils

Application Mobil SOMENTOR AH 45

Somentor A Series provide reliable and efficient lubrication and cooling during a wide variety of cold rolling applications. Suitable for a wide range of ferrous and non-ferrous metals, Somentor A series products can be used to cold roll high carbon, austenitic and ferritic stainless steel, as well as copper and copper alloys. Somentor A series is suitable for use on all mill configurations including 4 hi mills through to 20 hi multi-roll mills. Somentor A series products are suitable for the lubrication of back up bearings in multi-hi mills. Can be used in applications where filter systems employ active and/or inactive earth filter media. Somentor A series grades are suitable for use in rolling mill hydraulic systems to reduce contamination effects, depending on pump suitability for low viscosity oils.

Mobil SOMENTOR AL 70

Fully Compounded Cold Rolling Oils

Application Mobil SOMENTOR AL 70

Somentor A Series provide reliable and efficient lubrication and cooling during a wide variety of cold rolling applications. Suitable for a wide range of ferrous and non-ferrous metals, Somentor A series products can be used to cold roll high carbon, austenitic and ferritic stainless steel, as well as copper and copper alloys. Somentor A series is suitable for use on all mill configurations including 4 hi mills through to 20 hi multi-roll mills. Somentor A series products are suitable for the lubrication of back up bearings in multi-hi mills. Can be used in applications where filter systems employ active and/or inactive earth filter media. Somentor A series grades are suitable for use in rolling mill hydraulic systems to reduce contamination effects, depending on pump suitability for low viscosity oils.

Mobil Somentor EL 45

Premium Quality Fully Compounded Cold Rolling Oils

Application Mobil Somentor EL 45

Somentor EH and EL Series provide effective lubrication, cooling and filterability during all rolling applications, even under the severe conditions. These metal forming oils are recommended in the following applications: Cold rolling of high carbon, stainless steel, copper and copper alloys Suitable for use on four-hi and six-hi mills, 20 hi multi-roll mills, and tandem multi-roll operations. Somentor EL 45/EH 45 can be used to compensate viscosity increases of Somentor EL 70/EH 70 respectively during service Somentor EL Series provide excellent performance in bright annealing processes Somentor EH 70 is suitable for rectification operations and band polishing Somentor E series products are suitable for use in hydraulic systems to reduce contamination effects, depending on pump suitability for low viscosity fluids. Somentor E series grades are suitable for use in multi roll back-up bearing systems, with the exception of Somentor EH 45

Mobil SOMENTOR AH 70

Fully Compounded Cold Rolling Oils

Application Mobil SOMENTOR AH 70

Somentor A Series provide reliable and efficient lubrication and cooling during a wide variety of cold rolling applications. Suitable for a wide range of ferrous and non-ferrous metals, Somentor A series products can be used to cold roll high carbon, austenitic and ferritic stainless steel, as well as copper and copper alloys. Somentor A series is suitable for use on all mill configurations including 4 hi mills through to 20 hi multi-roll mills. Somentor A series products are suitable for the lubrication of back up bearings in multi-hi mills. Can be used in applications where filter systems employ active and/or inactive earth filter media. Somentor A series grades are suitable for use in rolling mill hydraulic systems to reduce contamination effects, depending on pump suitability for low viscosity oils.

Mobil DTE 746

Premium Turbine Oils

Application Mobil DTE 746

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include Electric power generation for high output base load utilities. Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes. Gas turbines in Captive Power plants. Gas or steam turbine prime movers. Hydroelectric turbine applications

Mobil Vacuum pump oil 100

Pump Oil

Application Mobil Vacuum pump oil 100

Mobil Vacuum Pump Oil 100 is recommended for the lubrication of vacuum pumps and is suitable for applications involving absolute pressures from 50 microns of mercury down to the highest vacua achieved by commercially available vacuum pumps. It is also suitable for use in pump bearings and sealing glands.

Mobil Airclean oil

Oil for vapour recovery equipment

Application Mobil Airclean oil

Airclean Oil is recommended for use as scrubber oil in vapour recovery systems in aluminium rolling plants. Airclean Oil is particularly designed to operate with Somentor rolling oils which boiling characteristics allow easy distillation of roll oils without contamination with the scrubber oil.

Mobil Delvac XHP Ultra LE 5W30 New name Mobil Delvac Modern 5W-30 Advanced Protection V6

Advanced Engine and Emission System Protection

Application Mobil Delvac XHP Ultra LE 5W30

Recommended by ExxonMobil for use in: Latest generation MB trucks and buses requiring MB-Approval 228.51 lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MB-Approval 228.5 are recommended (please always refer to MB-Sheet 223.2 and to the owner's manual of the respective vehicle). Latest generation of MAN trucks and buses requiring MAN M 3677 approved lubricants. In commercial vehicle and bus engines (only when operating in regions where ultra-low sulfur fuel is used) without particulate filters for which conventional SAPS oil per MAN M 3277 & M 3275-1 are recommended (please always refer to the owner's manual of the respective vehicle). On-highway light and heavy-duty trucking. Modern heavy-duty engines equipped with Diesel Particulate Filter (DPF) in line with owner manual recommendations