Motor oil

CASTROL Almaredge 11 FF

High performance semi-synthetic metalworking fluid

Application CASTROL Almaredge 11 FF

Almaredge 11 FF is especially designed for grinding of steel and machining cast iron.

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

Q8 Mahler GR8 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Applications Q8 Mahler GR8 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Your advantage! Price of Q8 Mahler GR8 SAE 40 drops automatically in larger quantities.

Mobilgard 570

Diesel Engine Cylinder Oil

Application Mobilgard 570

Mobilgard 570 by ExxonMobil is a premium quality, high-performance marine diesel engine cylinder oil. The outstanding performance of Mobilgard 570 has been demonstrated at the elevated peak firing pressures and liner temperatures found in modern marine two stroke engines. It has an optimum viscosity of over 20 cSt. at 100ºC and low volatility to ensure excellent lubricant distribution and oil film retention. Through the use of a balanced formulation for all-round performance, Mobilgard 570 has demonstrated the ability to minimise cylinder oil feed-rates whilst showcasing excellent cleanliness under sustained operation with fuel Sulphur levels down to 1.5%.

Mobilgard L540

Diesel Engine Cylinder Oil

Application Mobilgard L540

Mobilgard L540 has been developed for marine crosshead engines with increased power and fuel efficiency. Such engines exhibit higher temperatures and pressures in the cylinder, which reduce the lubricant's viscosity and increase the loads which it must withstand. Longer piston strokes have greatly increased the amount of surface to be protected and the amount of time the lubricant must withstand the severe cylinder temperatures and corrosive sulphur acids. Mobilgard L540 has also demonstrated superior performance in earlier engine designs. To ensure achieving the maximum equipment life possible, particular attention should be paid to the manufacturer's special recommendations regarding the running-in of new rings and liners. Mobilgard L540 was specially formulated for use in applications with fuel sulphur levels ranging from less than 0.3% up to 1.5%. Applications where the sulphur level is above 1.5% require special consideration and should be discussed with your ExxonMobil representative. Appropriate feed rates should be verified in all cases by through-the-ports inspection of liners to ensure adequate oil film.

Shell Sirius X 40

Super High Performance Diesel Engine Oil

Shell Sirius X 40 main applications:

• High-speed diesel engines operating on distillate fuels.
• N.B. Not suitable for N. American automotive type engines, for which API CF-4 type oils are required.

Shell Sirius X 40 is a top quality lubricant, of the Super High Performance Diesel Engine Oil (SHPDO) class. It is designed for the highest output, high-speed diesel engines, burning distillate fuel and is formulated to give better engine protection and longer drain intervals than normal diesel engine oils. Shell Sirius X 40 is especially suitable for the high power/weight units used in fast vessels and compact generator sets.

Please note!! Price of Shell Sirius X 40 drops automatically in larger quantities.

Shell Sirius X 40

Super High Performance Diesel Engine Oil

Shell Sirius X 40 main applications:

• High-speed diesel engines operating on distillate fuels.
• N.B. Not suitable for N. American automotive type engines, for which API CF-4 type oils are required.

Shell Sirius X 40 is a top quality lubricant, of the Super High Performance Diesel Engine Oil (SHPDO) class. It is designed for the highest output, high-speed diesel engines, burning distillate fuel and is formulated to give better engine protection and longer drain intervals than normal diesel engine oils. Shell Sirius X 40 is especially suitable for the high power/weight units used in fast vessels and compact generator sets.

Please note!! Price of Shell Sirius X 40 drops automatically in larger quantities.

Shell Caprinus XR 40

Railroad Diesel Engine Oil

Application Shell Caprinus XR 40

North American diesel engines subjected to the most arduous duty where 'zinc-free' oils are recommended by the engine manufacturer. Applications are primarily for railroad locomotives, however Caprinus XR 40 may also be suitable for certain engines in power generation, marine and mine-haul applications.

Shell Helix Ultra Professional AP-L 0W-30

Fully Synthetic Motor Oil - Tailored to meet engine manufacturer special requirements

Application Shell Helix Ultra Professional AP-L 0W-30

Shell Helix Ultra Professional AP-L 0W-30 for gasoline and diesel engines meets the technically challenging Peugeot B71 2312 in-house specification required in the latest Peugeot vehicles. To comply with Euro 6 regulations, it is formulated specifically for use in modern diesel engines using diesel particulate filter (DPF) technology and gasoline engines with three way catalytic converters (TWC).

CASTROL CareCut ES 3

High performance neat cutting oil

Application CASTROL CareCut ES 3

CareCut ES 3 is designed for severe honing and superfinishing of ferrous and non ferrous materials. It can also be used for grinding applications, drilling and general machining of aluminium, yellow metals, cast iron and medium alloyed steel. CareCut ES 3 can also be used for hard metal as well as tool grinding. CareCut ES 3 does not contain active sulphur and is hence compatible with yellow metals