Industry & Manfacturing lubricants

Mobil SHC 626

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 626 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 626, 627, 629 and 630 are suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
• + Mobil SHC 629, 630, 632, 634, 636, and 639 are approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 626 drops automatically with higher volumes.

Mobil SHC 630

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 630 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 630 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
   
• + Mobil SHC 630 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 630 drops automatically with higher volumes.

TOTAL CARTER SH 1000

Synthetic oil (PAO) for enclosed gears.

Applications TOTAL CARTER SH 1000

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

• bevel and spur gears
• Heavily loaded bearings and gear couplings.

Your advantage! Price of TOTAL CARTER SH 1000 drops automatically in larger quantities.

RENOLIN PG 220

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 220 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

Please note!! Price of RENOLIN PG 220 drops automatically in larger quantities.

RENOLIN PG 460

Fully synthetic polyglycol based gear- and general lubrication oils

RENOLIN PG 460 field of applications:

The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200ºC are temporarily tolerable.

Mobil SHC 634

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 634 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 634 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 634 drops automatically with higher volumes.

CASTROL ALPHASYN T 68

Synthetic gear & hydraulic lubricant

Application CASTROL ALPHASYN T 68

Alphasyn T grades have been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy / shock loaded systems. Alphasyn T is also suitable for the lubrication of bearings and circulatory systems operating at high temperatures and various high temperature applications such as in hydraulic systems and for the lubrication of large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity/temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range are fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification CL

Alphasyn T grades meet the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 68 drops automatically in larger quantities.

CASTROL ALPHASYN T 68

Synthetic gear & hydraulic lubricant

Application CASTROL ALPHASYN T 68

Alphasyn T grades have been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy / shock loaded systems. Alphasyn T is also suitable for the lubrication of bearings and circulatory systems operating at high temperatures and various high temperature applications such as in hydraulic systems and for the lubrication of large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity/temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range are fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification CL

Alphasyn T grades meet the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 68 drops automatically in larger quantities.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

CASTROL Alphasyn T 46

Synthetic gear oil

Application CASTROL Alphasyn T 46

Alphasyn T grades have been formulated for use in bearings, circulatory systems and moderately-loaded gear systems operating at both high and low temperatures. Alphasyn T should not be used for heavy / shock loaded systems. Alphasyn T is suitable for various applications where a lubricating oil is used under extremes of temperature or variable temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity / temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Your advantage! Price of CASTROL Alphasyn T 46 drops automatically in larger quantities.

CASTROL Alphasyn T 46

Synthetic gear oil

Application CASTROL Alphasyn T 46

Alphasyn T grades have been formulated for use in bearings, circulatory systems and moderately-loaded gear systems operating at both high and low temperatures. Alphasyn T should not be used for heavy / shock loaded systems. Alphasyn T is suitable for various applications where a lubricating oil is used under extremes of temperature or variable temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity / temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Your advantage! Price of CASTROL Alphasyn T 46 drops automatically in larger quantities.

CASTROL ALPHASYN T 220

Synthetic Gear Oil

Application CASTROL ALPHASYN T 220

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 220 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 220

Synthetic Gear Oil

Application CASTROL ALPHASYN T 220

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 220 drops automatically in larger quantities.

TOTAL NEVASTANE CHAIN OIL XT

High-temperature synthetic chain oil, suitable for incidental food contact

Applications TOTAL NEVASTANE CHAIN OIL XT

• NEVASTANE CHAIN OIL XT is a high performance chain oil specially designed for the lubrication of any control, drive and transport chains subject to high temperatures and loads in the food industries: bakeries, slaughterhouses, beverage industries, etc
• NEVASTANE CHAIN OIL XT is suitable for temperature up to 260 °C.

Your advantage! Price of TOTAL NEVASTANE CHAIN OIL XT drops automatically in larger quantities.

PLANTOGEL 2 S

PLANTOGEL 2 S field of applications:

PLANTOGEL 2 S (EAL) is used for lubrication of plain and roller bearings where water and earth are at risk, i.e. in water turbines or in agriculture and forestry. PLANTOGEL 2 S (EAL) is easily pumpable in central lubricating systems.

Please note!! Price of PLANTOGEL 2 S drops automatically in larger quantities.