Your sector

Castrol EDGE FST 10W-60

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is available in the following grades: 0W-20, 5W-20, 5W-30, 5W-30 A3/B4, 5W-30 C3, 5W-40, 5W-40 Turbo Diesel, 5W-50, 10W-30, 10W-40 and 10W-60.

Shell Spirax S6 GXME 75W-80 Previous Name: Spirax GSX 75W-80

Premium, Synthetic Technology, Fuel Economy Manual Transmission and Gearbox Oil

Shell Spirax S6 GXME 75W-80 main applications:

• Automotive transmissions
• Synchromesh gearboxes, including those with integrated retarders, and medium loaded axle drives where mineral or synthetic gear oils are required.
  
  

Shell Spirax S6 GXME 75W-80 is a unique fuel-efficient, long-life gear oil designed to give the ultimate in performance and protection to meet the requirements of current and future heavy duty gearboxes. Specially formulated fully synthetic base oils plus a unique new additive technology give improved lubrication and longer life for your equipment.

Please note!! Price of Shell Spirax S6 GXME 75W-80 drops automatically in larger quantities.

PLANTOHYD 40 N

Environmentally compatible hydraulic and lubricating oils based on natural raw materials, type HETG according to ISO 15380, for mobile and stationary hydraulic equipment

PLANTOHYD 40 N field of applications:

PLANTOHYD 32 N resp. PLANTOHYD 40 N can be used in mobile and stationary hydraulic equipment for which an ISO VG 32 resp. ISO VG 46 hydraulic oil is recommended. The change-over guidelines according to ISO 15380 have to be observed when converting a system to PLANTOHYD N. Repair paints and paints which are not based on 2-component-systems might not be compatible with mineral oil as well as natural raw materials like PLANTOHYD N. The PLANTOHYD N products perform best at tank temperatures between 50 und 60°C. Recommended operating temperature range: -27°C to +70°C.

Please note!! Price of PLANTOHYD 40 N drops automatically in larger quantities.

RENOLIT HLT 2

Synthetic Longlife Grease

RENOLIT HLT 2 field of applications:

RENOLIT HLT 2 is recommended for all greasing points in roller and friction bearings, especially those exposed to fluctuating ambient temperatures, and when high performance is required.

Please note!! Price of RENOLIT HLT 2 drops automatically in larger quantities.

CASSIDA CHAIN OIL 1500

Chain lubricant for food & beverage processing equipment

CASSIDA CHAIN OIL 1500 main applications:

• Drive and transport chains in the food Industry
• Also intended for use in equipment manufacturing food packaging

CASSIDA CHAIN OIL 1500 are fully synthetic high performance, anti-wear chain oils which have been specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA CHAIN OIL 1500 drops automatically in larger quantities.

RENOLIT S 2

RENOLIT S 2 field of applications:

Due to its low dynamic friction, RENOLIT S 2 is recommended for the lubrication of small, high-speed rolling and plain bearings, even precision bearings, if the operating speed is higher than the speed limit for grease lubrication specified by the rolling bearing manufacturer, even at low and very different temperatures.

Please note!! Price of RENOLIT S 2 drops automatically in larger quantities.

FUCHS Cassida FM Grease HD 2

Specialty semi-synthetic heavy-duty greases for food and beverage processing equipment

Application FUCHS Cassida FM Grease HD 2

Recommended for use in machinery where frequent changes of the grease charge are required or there is high product consumption rate. Slow and medium speed plain and rolling element bearings. Heavy-loaded and shock-loaded applications. Joints, linkages and slides. Overhead track systems. May also be used as protective antitrust film and as release agent on gaskets and seals of tank closures.

Mobilux EP 1

Universally applicable industrial grease EP 1

The most important applications of Mobilux EP 1 are:

• + Mobilux EP 1 are universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 1 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 1 fats are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Please note ! Price Mobilux EP 1 automatically drops with larger quantities.

Houghton Ensis DW 1262 (formerly Shell Ensis RX)

Ensis DW1262 is a rust inhibitor with drainage properties for medium protection

Ensis DW 1262 is a rust inhibitor with a medium-term protection (up to 12 months in storage). Ensis DW 1262 is a solvent-based anti-rust agent with de-watering properties that, after evaporation of the solvent, leaves a temporary waxy film on the metal surfaces to be protected. Ensis DW 1262 protects metal parts in an efficient way against the harmful effects of humidity, air, detergents and other contaminants. Ensis DW 1262 can be applied by means of dipping or spraying.

Advantages of Houghton Ensis DW 1262 (formerly Shell Ensis DW 1262) are:

• + Protection duration: Indoor: 
• 12 months 
• Covered outside: 3 months
• + Easy to remove with alkaline or solvent-based cleaners
• + Excellent demulsifying properties
• + Short drying time
• + It resists cracking & peeling

Castrol Vecton Long Drain 10W-30 E6/E9

For maximum drain intervals

Applications Castrol Vecton Long Drain 10W-30 E6/E9

Castrol Vecton Long Drain 10W-30 E6/E9 is designed for extended drain intervals in the latest Euro 6 diesel engines. It can also be used with low emission Euro 4 and Euro 5 European trucks and buses, especially where a "low SAPS" lubricant is required. Also applicable in older transport and contracting vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-30 E6/E9 drops automatically in larger quantities.

Mobil ATF SHC

Mobil Passenger Vehicle Lube

Superior Performance Synthetic Automatic Transmission Fluid

Most important applications of Mobil ATF SHC are:

• + Mobil ATF SHC is recommended by ExxonMobil for use in modern high performance transmissions operating in the severe, high-temperature, heavy load or cold climate applications. It is ideal for manual transmissions designed to operate with ATF fluids, where it will provide excellent gear shifting and protection under severe operating conditions.

Pay attention! Price of Mobil ATF SHC drops automatically with higher volumes.

RENOLIN MR 15 VG 46

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 15 VG 46 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 15 VG 46 drops automatically in larger quantities.

Shell Naturelle S2 HF 46 previously Naturelle HF-E 46

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 46 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 46 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 46 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 46 drops automatically in larger quantities.

TOTAL NEVASTANE AW 68

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 68

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 68 drops automatically in larger quantities.

TOTAL NEVASTANE AW 22

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 22

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 22 drops automatically in larger quantities.

TOTAL NEVASTANE AW 32

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 32

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 32 drops automatically in larger quantities.

TOTAL NEVASTANE AW 46

Hydraulic oils, suitable for incidental food contact.

Applications TOTAL NEVASTANE AW 46

• NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or airline lubricators in the food processing industries.
• NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

Your advantage! Price of TOTAL NEVASTANE AW 46 drops automatically in larger quantities.

PLANTO TAC 68

PLANTO TAC 68 field of applications:

PLANTO TAC 68 was developed specially for all lubricated saw chains which are used in the toughest conditions in environmentally sensitive areas such as protected water zones, forests, tree nurseries, etc.

Shell Naturelle S2 HF 32 previously Shell Naturelle HF-E 32

Fully Synthetic, Biodegradable, Less-flammable Hydraulic Fluid

Shell Naturelle HF-E 32 main applications:

• Mobile / exterior hydraulic applications
• General industrial control equipment and hydraulic systems
• Environmentally sensitive areas
• Industrial operation subject to fire hazards
  

Shell Naturelle Fluid HF-E 32 is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. Shell Naturelle Fluid HF-E 32 is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries.

Pay attention! Price of Shell Naturelle HF-E 32 drops automatically in larger quantities.

TOTAL BIOHYDRAN TMP 46

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 46

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 46 drops automatically in larger quantities.