Your sector

TOTAL PRESLIA GT 46

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 46

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 46 drops automatically in larger quantities.

RENOLIN MR 20 VG 68

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 20 VG 68 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 20 VG 68 drops automatically in larger quantities.

Q8 Mahler GR5 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Applications Q8 Mahler GR5 SAE 40

Synthetic based gas engine oil for stationary gas engines operating at mild to severe conditions

Increased demands for lower emissions and higher efficiency in today's gas engines require more oxidation stable engine oils, capable of controlling liner cleanliness and oil consumption at increased liner and piston ring temperatures. Q8 Mahler GR5 has been specifically developed to satisfy these needs.

Your advantage! Price of Q8 Mahler GR5 SAE 40 drops automatically in larger quantities.

Q8 Mahler G8 SAE 40

High/medium ash gas engine oil

Your advantage! Price of Q8 Mahler G8 SAE 40 drops automatically in larger quantities.

Q8 Mahler G10 SAE 40

High ash gas engine oil

Your advantage! Price of Q8 Mahler G10 SAE 40 drops automatically in larger quantities.

Q8 Ravel BW

Low viscosity short-term rust preventive fluid

Applications Q8 Ravel BW

Q8 Ravel BW is a high quality indoor protection fluid for the protection of non-ferrous and ferrous components and assemblies where the use of a solvent cutback product is not permitted because of fire hazards. The film provides effective short-term protection against corrosion especially for indoor intermediate storage. The Q8 Ravel BW can be applied by dipping, rolling or spraying leaving a thin oily layer. The water removing properties are more effective when the components are dipped into the oil tank. It can be easily removed with a solvent or alkaline cleaner.

Your advantage! Price of Q8 Ravel BW drops automatically in larger quantities.

Spirax S3 AM 80W-90 Previous Name: Shell Spirax MX 80W-90

High performance, GL-4/5 Universal Gear Oil for MAN, ZF, MACK and Scania

Spirax S3 AM 80W-90 main applications:

• Passenger car automatic transmissions
• Heavy duty automatic transmissions
• Power steering units
• Hydraulic power systems

Shell Spirax S3 AM 80W-90 is a true universal driveline oil designed for use in modern heavy duty axles and gearboxes offering the convenience of one transmission oil for the whole driveline. Specially optimised mineral base oils and new additive technology improve lubrication of the drive train and potentially extend oil drain intervals. For e.g. MAN, ZF, MACK and Scania.

Please note!! Price of Spirax S3 AM 80W-90 drops automatically in larger quantities.

Shell Morlina S1 B 150 previously Shell Vitrea 150

Industrial Bearing & Circulating Oils

Application Shell Morlina S1 B 150

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications.

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL HYSPIN DSP 32

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 32

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 32 drops automatically in larger quantities.

Shell Rimula R6 ME 5W-30

Fully Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 ME 5W-30 main applications:

• On-highway heavy duty applications
• Low emission engine use

Shell Rimula R6 ME 5W30 oils deliver highly responsive protection, enhanced fuel economy with no compromise in durability, maintenance saving, long drain performance coupled with protection against soot induced wear, piston and engine deposits.

Please note!! Price of Shell Rimula R6 ME 5W-30 drops automatically in larger quantities.

CASTROL ALPHA SP 680

Gear oils DIN CLP 680

Application CASTROL ALPHA SP 680

The Alpha SP 680 is recommended for the lubrication of industrial gear boxes using forced circulation or splash and oil bath lubrication. Castrol Alpha SP 680 may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications. They have very good viscosity characteristics to ensure starting torques are not excessively high in cold operating conditions.

The additives in Alpha SP 680 are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Alpha SP 680 is compatible with the most common types of seal materials.

Alpha SP 680 is classified as follows: DIN Classification is CLP 680.

Your advantage! Price of CASTROL ALPHA SP 680 drops automatically in larger quantities.

TOTAL CIRKAN RO 32

R and O type machine oils.

Applications CIRKAN RO 32

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 32 drops automatically in larger quantities.

CASTROL SPHEEROL LC

Long-term Grease

Application CASTROL SPHEEROL LC

Due to its high load carrying capacity and its water resistance Spheerol LZ is suited for the universal use in building site operations and in all transport devices. In addition it can be used in machines of the agricultural and forestry sector and also for demanding grease lubrication points in industrial gearboxes. Spheerol LZ is particularly suited for highly loaded rolling and plain bearings in a wet and dusty environment (e.g. universal joints, wheel hubs, sprockets, steering racks, etc.). The temperature range for this grease lies between - 20 °C and + 120 °C (for a short time even 130°C).

Your advantage! Price of CASTROL SPHEEROL LZ drops automatically in larger quantities.

TOTAL PNEUMA 68

Mineral oils for pneumatic tools.

Applications TOTAL PNEUMA 68

• PNEUMA are formulated from high quality base stocks and specific additives
• Meet the requirements of pneumatically operated rock drills lubrication in underground and surface mining operation.

Your advantage! Price of TOTAL PNEUMA 68 drops automatically in larger quantities.

Q8 Goya NT 460

Outstanding performance industrial gear oil

Applications Q8 Goya NT 460

Q8 Goya NT 460 is used in heavily loaded industrial gearboxes operating in harsh conditions such as wind turbines, paper and steel mills, cement and mining, plastic extrusion and injection, aerators and agitators. Q8 Goya NT 460 is also used in non-gear applications including shaft couplings, screws, heavily loader plain and rolling contact bearings (slow to medium speed)

Your advantage! Price of Q8 Goya NT 460 drops automatically in larger quantities.

CASTROL HONILO 981

High performance neat cutting oil

Application CASTROL HONILO 981

Honilo 981 is designed for honing and superfinishing of ferrous and non-ferrous metals. It can also be used for grinding applications, drilling and general machining of aluminium and yellow metals.

Your advantage! Price of CASTROL HONILO 981 drops automatically in larger quantities.

TOTAL HYDRANSAFE HFC 146

Fire resistant hydraulic fluid.

Applications TOTAL HYDRANSAFE HFC 146

• HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fireresistant hydraulic fluid.
• regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in mining industry
• Hydraulic systems of mould injection machines.
• Operating temperature range is from - 20 °C to + 60 °C.
• When changing from a mineral oil based hydraulic system components and to apply an appropriate cleaning of the hydraulic system

Your advantage! Price of TOTAL HYDRANSAFE HFC 146 drops automatically in larger quantities.