Your sector
-
Shell Spirax S6 ATF ZM
Quick orderingMore infoShell Spirax S6 ATF ZM Previous Name: Donax TZ
Premium Heavy Duty Transmission Oil for ZF Long Drain
Shell Spirax S6 ATF ZM main applications:
- Heavy duty automatic transmissions Shell Spirax S6 ATF ZM can also be used in all ZF-Ecomat - and ZF-Ecolife transmissions, and where retarders are used.
Shell Spirax S6 ATF ZM Oil is a fully synthetic, premium quality, heavy-duty automatic transmission oil specifically designed in partnership with ZF as a lubricant for the newest generation of ZF-Ecomat - and ZFEcolife transmissions. Spirax S6 ATF ZM is the ultimate performance automatic transmission fluid allowing extended drain intervals even under the most severe conditions.
Please note!! Price of Shell Spirax S6 ATF ZM drops automatically in larger quantities.
Show more€ 5,49 / L -
Castrol Spheerol EPL 1 - 180 kilo
Quick orderingMore infoCASTROL SPHEEROL EPL 1
Bearing grease
Application CASTROL SPHEEROL EPL 1
The Spheerol EPL 1 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.
Your advantage! Price of CASTROL SPHEEROL EPL 1 drops automatically in larger quantities.
Show more€ 6,38 / Kg -
Fuchs Mastersol CT 1
Quick orderingMore infoMASTERSOL CT1
Rod and Tube Drawing Lubricant for Copper and Copper Alloys
MASTERSOL CT1 field of applications:
The product is primarily recommended for drawing operations on copper, brass and brass alloy rod or tubes using either recirculation or dip tank application techniques.
Please note!! Price of MASTERSOL CT1 drops automatically in larger quantities.
Show more€ 6,49 / Kg -
Total Finaturol HT
Quick orderingMore infoTOTAL FINATUROL HT
Vegetable demoulding oil for high temperatures.
Applications TOTAL FINATUROL HT
- FINATUROL HT is a vegetable demoulding oil. It is used for severe moulding operations after they have come out of the oven.
- FINATUROL HT guarantees a perfect demoulding operation for all bakery and pastry products and it respects the taste and odor of the finished product even for products with a long shelf life.
- The film is maintained during the baking of the products. It ensures excellent demoulding performances and it prevents sticking.
Your advantage! Price of TOTAL FINATUROL HT drops automatically in larger quantities.
Show more€ 5,62 / L -
Houghton Macron 400 M-32
Quick orderingMore infoHoughton Macron 400 M-32
Properties
Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
Macron 400 M-32 is free from zinc, chlorine and active sulphur.
Applications
Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.
Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.
It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.
MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
MACRON 400 M-32 is free from zinc, chlorine and active sulphur.
Advantages:
- Increased productivity - reduced machine downtime.
- Reduced cost - long sump life.
- Secure handling - fulfills HLP 1 CLP standards.
- Secure handling - high EHS standard.
Show more€ 5,64 / L -
Houghton Garia 404 M-10
Quick orderingMore infoHoughton Garia 404 M-10
Properties
Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.
Applications
Garia 404 M-10 is recommended for:
Grinding
Deep-hole drilling
Taping or broaching of low to medium alloyed steels
Gear hobbing
Machining on automatic lathes
Garia 404 M-10 is used neat as supplied.
Show more€ 5,67 / L -
Castrol Spheerol EPL 2 - 180 kilo
Quick orderingMore infoCASTROL SPHEEROL EPL 2
Bearing grease
Application CASTROL SPHEEROL EPL 2
The Spheerol EPL 2 comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.
Your advantage! Price of CASTROL SPHEEROL EPL 2 drops automatically in larger quantities.
Show more€ 6,61 / Kg -
Fuchs RENOLIN MR 10 VG 32
Quick orderingMore infoRENOLIN MR 10 VG 32
Special lubricating and hydraulic fluids with excellent corrosion protection
RENOLIN MR 10 VG 32 field of applications:
RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.
Please note!! Price of RENOLIN MR 10 VG 32 drops automatically in larger quantities.
Show more€ 5,80 / L -
Q8 Axle Oil XG 80W-140
Quick orderingMore infoQ8 Axle Oil XG 80W-140
Synthetic SAE J2360 axle fluid
Applications Q8 Axle Oil XG 80W-140
Q8 Axle Oil XG 80W-140 is recommended for use in rear axles and final drive applications and is approved by Scania to use with extended drain intervals up to 180,000km. It meets the requirements of SAE J2360, top European OEMs and component manufacturers such as ZF.
Your advantage! Price of Q8 Axle Oil XG 80W-140 drops automatically in larger quantities.
Show more€ 5,73 / L -
Shell Spirax S3 AX 85W-140
Quick orderingMore infoSpirax S3 AX 85W-140 Previous Name: Shell Spirax S3 AX 85W-140
High Performance, GL-5 Axle Oil for General Applications
Spirax S3 AX 85W-140 main applications:
- Automotive differentials
- General gear sets
Shell Spirax S3 AX 85W-140 is a high performance, API GL-5 gear and axle oil for moderate to heavily loaded on and off-road driveline applications requiring SAE 85W-140 oil.
Please note!! Price of Spirax S3 AX 85W-140 drops automatically in larger quantities.
Show more€ 5,80 / L -
Fuchs RENOLIN CLP 220
Quick orderingMore infoFuchs Renolin EP 220, previously RENOLIN CLP 220
Heavy duty - EP 220 - industrial gear oils of highest performance, outstanding extreme pressure characteristics and load carrying capacity
Renolin EP 220 field of applications:
The RENOLIN EP 220 oils are recommended for industrial spur-, helical- and bevel enclosed gears with circulation or splash lubrication, operating at oil temperatures up to 100ºC and peaks above (up to 120ºC).
Show more€ 5,98 / L -
Q8 El Greco 150
Quick orderingMore infoQ8 El Greco 150
Applications Q8 El Greco 150
Industrial gear drives
Windturbine gears.
Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.
Show more€ 5,92 / L -
Fuchs RENISO C170E
Quick orderingMore infoRENISO C170E
Refrigeration oils for CO2 compressors
RENISO C170E field of applications:
The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.
Please note!! Price of RENISO C170E drops automatically in larger quantities.
Show more€ 41,13 / L -
Total Finaturol D
Quick orderingMore infoTOTAL FINATUROL D
Very high performance vegetable oil for dough dividers and bread slicers
Applications TOTAL FINATUROL D
- FINATUROL D has been developed to ensure optimum performances of lubrication and to give maximum wear protection to the knives with an oil consumption as low as possible.
- FINATUROL D is used to prevent sticking and the development of varnishes on the surface of the knives.
View product data of Total Finaturol K 2
Show more€ 5,95 / L -
Houghton Macron 205 M-8
Quick orderingMore infoHoughton Macron 205 M-8
Properties
Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
Macron 205 M-8 is zinc and sulphur free.
Applications
Macron 205 M-8 is a universal honing, superfinishing and grinding oil.
Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.
Macron 205 M-8 has higher viscosity compared to other typical honing oils.
Show more€ 6,03 / L -
Castrol Variocut B 30 - 208 L
Quick orderingMore infoCASTROL VARIOCUT B 30
High performance neat cutting oil
Application CASTROL VARIOCUT B 30
Variocut B 30 is designed for arduous broaching of stainless steels and difficult to machine high tensile steel alloys. It is also suitable for gear hobbing, gear cutting and gear shaping. Variocut B 30 contains active sulphur and is not compatible with yellow metals.
Your advantage! Price of CASTROL VARIOCUT B 30 drops automatically in larger quantities.
Show more€ 6,09 / L -
Castrol Alusol SL 51 XBB 208L
Quick orderingMore infoCastrol Alusol SL 51 XBB
High performance soluble metalworking fluid
Application Castrol Alusol SL 51 XBB
Alusol SL 51 XBB is especially designed for machining of aluminum alloys. The product can also be used for machining of ferrous alloys.
Your advantage! Price of Castrol Alusol SL 51 XBB drops automatically in larger quantities.
Show more€ 6,18 / L -
Houghton Macron 2425 S-14
Quick orderingMore infoHoughton Macron 2425 S-14
Properties
Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.
Applications
Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.
Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.
Approvals
Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.
Show more€ 6,20 / L -
Houghton Macron 2429 S-8
Quick orderingMore infoMACRON 2429 S-8
It is based on HC hydro crack base oil technology with very low aromatic content. A combination of polar, extreme pressure and anti-wear addivies provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
Properties
MACRON 2429 S-8 is free from zinc, chlorine and active sulphur.
Applications
MACRON 2429 S-8 main application is for grinding cemented carbide with diamond wheels. The product is also suitable for grinding steel with CBN and ceramic wheels at high cutting speeds. The selection of additives along with low viscosity allows finest filtration even below 1 pm mesh.
MACRON 2429 S-8 is inhibited against leaching of cobalt.
Approvals
Product is approved by Waiter, Schutte, Junker, Transor.
Show more€ 6,27 / L
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt