Your sector

Castrol Alusol SL 61 XBB

High performance semi-synthetic metalworking fluid

Application Castrol Alusol SL 61 XBB

Alusol SL 61 XBB is especially designed for the machining of aluminium alloys. The product can also be used for the machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 61 XBB drops automatically in larger quantities.

CASTROL ALPHASYN T 68

Synthetic gear & hydraulic lubricant

Application CASTROL ALPHASYN T 68

Alphasyn T grades have been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy / shock loaded systems. Alphasyn T is also suitable for the lubrication of bearings and circulatory systems operating at high temperatures and various high temperature applications such as in hydraulic systems and for the lubrication of large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity/temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range are fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification CL

Alphasyn T grades meet the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 68 drops automatically in larger quantities.

TOTAL CARTER EP 460 previous Carter SY 460

Mineral oils for enclosed gears.

Applications TOTAL CARTER EP 460

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:

• bevel and spur gears
• bearings and gear couplings
• worm gears.

Your advantage! Price of TOTAL CARTER EP 460 drops automatically in larger quantities.

Plantoflux 46 AT-S

Synthetic fire-resistant hydraulic fluids based on organic esters, type HFDU

Plantoflux 46 AT-S field of applications:

PLANTOFLUX-AT-S are primarily used as fire resis-tant hydraulic fluids in machines or plants operating in hazardous conditions, i.e. where naked flames or high temperatures arepresent and the fire riskcaused by the fluid leakage is high, most notably: steel mills, blast furnaces, continuous casting ma-chine, coke plants, etc.PLANTOFLUX-AT-S are generally applicable in any hydraulic systems where environmental protection and biodegradability are a priority.

Please note!! Price of Plantoflux 46 AT-S drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

CASTROL ALPHASYN T 320

Synthetic Gear Oil

Application CASTROL ALPHASYN T 320

The Alphasyn T range has been formulated for use in most types of light to medium duty enclosed gear systems but should not be used for heavy or shock loaded systems. Alphasyn T is also suitable for bearings and circulatory systems operating at high temperatures. Alphasyn T is suitable for various applications where a lubricating oil is used under high temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity and temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn T is classified as follows: DIN Classification is CL

The Alphasyn T range meets the requirements of:

• DIN 51517 Part 2
• David Brown Type A

Your advantage! Price of CASTROL ALPHASYN T 320 drops automatically in larger quantities.

CASTROL ALPHASYN EP 220

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 220

The Alphasyn EP 220 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 220 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 220 drops automatically in larger quantities.

CASTROL ALPHASYN PG 220

Synthetic heavy duty (PAG) EP gear oils

Application CASTROL ALPHASYN PG 220

The Alphasyn PG range of gear oils are primarily intended for use in worm reduction gearboxes where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG basestock provides inherently high viscosity index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM's that allow the use of PAG based gear oils

Your advantage! Price of CASTROL ALPHASYN PG 220 drops automatically in larger quantities.

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

Shell Spirax S6 ATF A295

Synthetic Extended Drain Heavy Duty Automatic Transmission Fluid

Shell Spirax S6 ATF A295 main applications:

Allison Medium/Heavy Duty Automatic Transmissions Spirax S6 ATF A295 was developed to meet the extended drain requirements of late model medium and heavy duty Allison automatic transmissions. It is particularly suitable for transmissions requiring a TES-295 type product.

Shell Spirax S6 ATF A295 Oil is a fully synthetic, heavy-duty automatic transmission fluid which is specifically designed and approved for use in transmissions requiring Allison TES-295 fluids. Spirax S6 ATF A295 is approved for extended service intervals and remains stable even under severe operating conditions

Please note!! Price of Shell Spirax S6 ATF A295 drops automatically in larger quantities.

CASTROL ALPHASYN EP 320

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 320

The Alphasyn EP 320 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 320 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 320 drops automatically in larger quantities.

Renolin Therm 380S

Synthetic Heat Transfer Fluid

Renolin Therm 380S field of applications:

RENOLIN THERM 380 S is optimally suited for use in the indirect heating of reactors, polymerization tanks and distillation columns, processing machines and driers, as well as heat exchangers in processing plants and in systems for heat recovery. The heat transfer fluid is best used at temperatures ranging from 250 to 340°C. The upper limit for use is an inlet temperature of 350°C. The film temperature should not exceed 380°C.

Please note!! Price of Renolin Therm 380S drops automatically in larger quantities.

CASTROL Radicool SF

Antifreeze Coolant

Application CASTROL Radicool SF

The special inhibitor package used in Castrol Radicool SF enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF provides excellent protection against cavitation corrosion and effective water pump lubrication , reducing wear and noise. The additive technology used in Castrol Radicool SF prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF is approved by a number of OEM's including Merceded Benz, Volkswagon, MAN and Ford. It is also recommended against the following vehicle manufacturer's specifications ; General Motors GM 6277M, Deutz , Cummins IS series and N14 engines, Jenbacher, Komatsu, Renault Type D, Jaguar CMR 8229 and MTU MTL 5048 Series 2000C&I. Castrol Radicool SF contains a bittering agent to deter from accidental ingestion

CASTROL Alphasyn PG 460

Synthetic gear oils

Application CASTROL Alphasyn PG 460

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 460 drops automatically in larger quantities.

CASTROL ALPHASYN EP 150

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 150

The Alphasyn EP 150 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 150 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production. The use of a PAO base stock provides an inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range.

The Alphasyn EP 150 is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn EP 150 is classified as follows: DIN Classification is CLP 150

Your advantage! Price of CASTROL ALPHASYN EP 150 drops automatically in larger quantities.

CASTROL ALPHASYN EP 460

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 460

The Alphasyn EP 460 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 460 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 460 drops automatically in larger quantities.

Mobil SHC 526

Hydraulic Oils

Mobil SHC™ 500 Series oils are exceptional performance hydraulic oils formulated from synthesised, wax-free hydrocarbon base fluids combined with a carefully engineered super-stabilised additive system.

Most important applications of Mobil SHC 526 are:

• + Hydraulic systems prone to deposit build-up such as sophisticated Numerically Controlled (NC) machines, particularly where close clearance servo-valves are used
• + Systems employing multi-metal component designs
• + High pressure vane, piston and gear pumps
• + Systems where cold start-up and / or very high operating temperatures are typical
• + Where small amounts of water are unavoidable
• + In systems containing gears and bearings
• + Systems requiring a high degree of load-carrying capability and anti-wear protection
• + Applications where thin oil-film corrosion protection is an asset such as in systems containing moisture
   

Pay attention! Price of Mobil SHC 526 drops automatically with higher volumes.

Mobil SHC 627

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 627 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 627 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
   

Pay attention! Price of Mobil SHC 627 drops automatically with higher volumes.

TOTAL BIOHYDRAN SE 68

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 68

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 68 drops automatically in larger quantities.

CASSIDA FM GEAR OIL TLS 150

Speciality gear fluid for use in food manufacturing equipment

CASSIDA FM GEAR OIL TLS 150 applications:

Lubrication of rotary can seaming machines equipped with total loss systems. Circulating and bearing oil systems where contamination with water or food juice can occur, such as citrus juice extraction machines. Can be used on drives and transport chains in the food Industry. Easily applied by either brush, through baths or by automatic lubrication system

Please note!! Price of CASSIDA FM GEAR OIL TLS 150 drops automatically in larger quantities.