7 warehouses in Europe
Optigear Synthetic RO 150
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Optigear Synthetic RO 150
High performance gear oil
Applications Optigear Synthetic RO 150
All types of gear drives, even under difficult conditions. Bevel gear reducers, including those with a large offset (hypoïd) and heavy alternating loads. All types of roller bearings, with heavy loads and high and low temperatures. Splash lubrication at high speeds as well as injection and oil mist lubrication.
Description Optigear Synthetic RO 150
Optiear™; Synthetic RO 32 is a special long-term multigrade oil with high performance. It has been developed for drives for railway traffic and mechanical engineering applications (such as in Robots), in view of the extreme climate conditions and long-term use. The Microflux Trans additive combination is free of solid lubricants, adapts to even rapidly changing conditions and actively reduces wear - even under the most severe operating conditions. Can be used over a very wide temperature range (no preheating required in winter).
The main features and benefits of Optigear Synthetic RO 150 are:
- High pressure absorption and excellent wear protection.
- Safe bearing lubrication at high and low temperatures.
- High protection against gear galling.
- Above average application times - even under difficult conditions.
- Reduction of the friction coefficient and operating temperature.
- Good protection against corrosion.
- Long gear life.
- Exceeds the wear protection requirements according to DIN 51517, part 3.
Ask? Ask your question to the Technical Helpdesk of OilOnline
Typical Characteristics
| Properties | Method | Optigear Synthetic RO 150 | ||
| Appearance | - | - | Visual | Blue green |
| Density | @ 15°C | kg/m³ | DIN 51757 | 868 |
| Viscosity, Kinematic | @ 40°C | mm²/s | ISO 3104 | 150 |
| Viscosity, Kinematic | @ 100°C | mm²/s | ISO 3104 | 18.0 |
| Viscosity Index | - | - | ISO 2909 | 130 |
| solidification point | - | °C | DIN-ISO 3016 | -45 |
| Foam Sequence II - tendency / stability | - | ml / ml | ISO 6247 | 50/0 |
| water secretion | @ 82°C (40/37/3) | min | ISO 6614 | 30 |
| Copper Corrosion | (24 uur @ 100°C) | - | DIN EN ISO 2160 | 1 |
| Rust Test - Distilled Water | - | - | DIN ISO 7120-1 | Geen roest |
| Flash point - open cup method | - | °C | DIN EN ISO 2592 | 210 |
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
