Biodegradable oil

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.

Klüber Klüberbio EG 2-100

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-100

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Klüber Klüberbio EG 2-68

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-68

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

Q8 da Vinci AM 4

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release.

Applications Q8 da Vinci AM 4

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface.

Q8 da Vinci AM 4 is typically used for demoulding of prefab concrete foundation piles and on-site elements

Your advantage! Price of Q8 da Vinci AM 4 drops automatically in larger quantities.

Q8 da Vinci 8

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release

Applications Q8 da Vinci 8

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould.

This layer is a critical part of the process as the chemistry of the product will result in soap formations at the interface.

Q8 da Vinci 8 is typically used for demoulding of on-site elements for vertical and warm moulds

Klüber Klüberbio EG 2-150

Environmentally compatible, synthetic high-performance gear oils

Application Klüber Klüberbio EG 2-150

Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils. Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seallubricant combination. Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives. Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.

TOTAL BIOHYDRAN TMP 100

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

Applications TOTAL BIOHYDRAN TMP 100

• BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with reenforced anti-wear properties
• BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc

Your advantage! Price of TOTAL BIOHYDRAN TMP 100 drops automatically in larger quantities.

Shell PANOLIN S3 HLP Synth EAL 32

Hydraulic fluid - high performance, readily biodegradable, saturated synthetic esters

Application Shell PANOLIN S3 HLP Synth EAL 32

Shell PANOLIN S3 HLP SYNTH EAL is zinc-free additive technology, blended with fully synthetic saturated and unsaturated esters provides an good blend of lubrication performance and environmental acceptability. Readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas where eco-label compliance is required including US waters. For use in stationary and mobile hydraulic systems including marine and deck equipment, construction and forestry.

Shell Naturelle S4 Hydraulic Fluid 46

Environmentally Acceptable, Fully Saturated Synthetic Hydraulic Fluid

Application Shell Naturelle S4 Hydraulic Fluid 46

Mobile / exterior hydraulic applications. Hydraulic and fluid power transmission systems in exposed environments can be subject to variations in temperature. The low pour point and naturally high shear stable viscosity index (VI) of Shell Naturelle S4 Hydraulic Fluid helps deliver responsive performance from cold start to full load, heavy duty operation.

General industrial control equipment and hydraulic systems. The excellent anti-wear properties and high viscosity index (VI) of Shell Naturelle S4 Hydraulic Fluid, mean that it can often be used where ISO 11158 (HM/HV) and DIN 51524 Part 2 or Part 3 (HLP/HVLP) mineral oil hydraulic fluids are specified.

Environmentally sensitive areas. Shell Naturelle S4 Hydraulic Fluid is an ‘environmentally acceptable’ hydraulic fluid (ISO 15380 HEES), with ‘reduced harm for water and soil during use’ (EU Ecolabel). When compared to conventional mineral oil hydraulic fluids, it will have a reduced environmental impact in the event of a leak or accidental spillage. It is particularly suited for use in environmentally sensitive areas.

Plantoflux 46 AT-S

Synthetic fire-resistant hydraulic fluids based on organic esters, type HFDU

Plantoflux 46 AT-S field of applications:

PLANTOFLUX-AT-S are primarily used as fire resis-tant hydraulic fluids in machines or plants operating in hazardous conditions, i.e. where naked flames or high temperatures arepresent and the fire riskcaused by the fluid leakage is high, most notably: steel mills, blast furnaces, continuous casting ma-chine, coke plants, etc.PLANTOFLUX-AT-S are generally applicable in any hydraulic systems where environmental protection and biodegradability are a priority.

Please note!! Price of Plantoflux 46 AT-S drops automatically in larger quantities.

Shell Naturelle S2 Hydraulic Fluid 68 previously Shell Naturelle HF-E 68

Fully synthetic, environmentally friendly biodegradable and low-flammable hydraulic oil

Main uses of Shell Naturelle S2 HF 68 are:

• + Mobile /hydraulic applications outside
• + General industrial control systems and hydraulics
• + Ecologically sensitive areas, with Ecolabel
  
  

Shell Naturelle S2 68 Hydraulic Fluid is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. It is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries. Fully synthetic esters, blended with ashless additives, provide Shell Naturelle S2 HF 68 with a superior blend of lubrication performance and environmental acceptability.

Total Carter BIO 220

High performance Biodegradable lubricant for enclosed industrial gearboxes

Applications Total Carter BIO 220

• CARTER BIO is a new generation high performance biodegradable lubricant developed for industrial gears and bearing lubrication.
• CARTER BIO is designed to replace mineral gear oils for gearboxes operating in environmentally sensitive areas.

Total Carter BIO 320

High performance Biodegradable lubricant for enclosed industrial gearboxes

Applications Total Carter BIO 320

• CARTER BIO 320 is a new generation high performance biodegradable lubricant developed for industrial gears and bearing lubrication.
• CARTER BIO 320 is designed to replace mineral gear oils for gearboxes operating in environmentally sensitive areas.

TOTAL BIOHYDRAN SE 68

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 68

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 68 drops automatically in larger quantities.

Shell Naturelle S4 Stern Tube Fluid 100

Special Purpose Biodegradable Synthetic Stern Tube Fluid

Shell Naturelle S4 Stern Tube Fluid 100 main applications:

Shell Naturelle S4 Stern Tube Fluid 100 is designed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid is designed to offer superior lubrication performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP)

Pay attention! Price of Shell Naturelle S4 Stern Tube Fluid 100 drops automatically in larger quantities.

Shell Naturelle S4 Stern Tube Fluid 100

Special Purpose Biodegradable Synthetic Stern Tube Fluid

Shell Naturelle S4 Stern Tube Fluid 100 main applications:

Shell Naturelle S4 Stern Tube Fluid 100 is designed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid is designed to offer superior lubrication performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP)

Pay attention! Price of Shell Naturelle S4 Stern Tube Fluid 100 drops automatically in larger quantities.

Shell Naturelle S4 Gear Fluid 150

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Application Shell Naturelle S4 Gear Fluid 150

Marine propulsion drives, thrusters and controllable pitch propellers. Industrial gears, bearings and other components in circulated and splash lubricated systems

Shell Naturelle S4 Gear Fluid 100 

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Shell Naturelle S4 Gear Fluid 100 main applications:

• Marine propulsion drives, thrusters and controllable pitch propellers
• Industrial gears, bearings and other components in circulated and splash lubricated systems
  
  

Shell Naturelle S4 Gear Fluid 100 is an advanced synthetic fluid for use in gearing applications such as thrusters and propulsion drives. Manufactured from fully saturated esters, Shell Naturelle S4 Gear Fluid 100 is designed to offer superior load carrying performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Gear Fluid 100 is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit

Please note!! Price of Shell Naturelle S4 Gear Fluid 100 drops automatically in larger quantities.