7 warehouses in Europe
Compressor Rotating Oil
-
Klüber Summit SH 32
Quick orderingMore infoKlüber Summit SH 32
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 32
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 18,72 / L -
Klüber Summit PS 400
Quick orderingMore infoKlüber Summit PS 400
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 400
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 16,17 / L -
Klüber Summit SH 68
Quick orderingMore infoKlüber Summit SH 68
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 68
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 29,69 / L -
Klüber Summit PS 200
Quick orderingMore infoKlüber Summit PS 200
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 200
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 14,40 / L -
Klüber Summit PS 150
Quick orderingMore infoKlüber Summit PS 150
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Application Klüber Summit PS 150
Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.
Show moreStarting at: € 14,40 / L -
Klüber Summit Ultima 68
Quick orderingMore infoKlüber Summit Ultima 68
Synthetic air compressor oils for oil change intervals up to 12,000 operating hours
Application Klüber Summit Ultima 68
Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.
Show moreStarting at: € 28,53 / L -
Klüber Summit DSL 46
Quick orderingMore infoKlüber Summit DSL 46
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 46
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 17,75 / L -
Klüber Summit Ultima 46
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 27,50 / L -
Klüber Summit DSL 125
Quick orderingMore infoKlüber Summit DSL 125
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 125
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 29,35 / L -
Klüber Summit DSL 100
Quick orderingMore infoKlüber Summit DSL 100
Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Application Klüber Summit DSL 100
The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).
Show moreStarting at: € 28,22 / L -
Klüber ISOFLEX LDS 18 SPECIAL A
Quick orderingMore infoKlüber ISOFLEX LDS 18 SPECIAL A
Dynamically light, long-term lubricating grease
Application Klüber ISOFLEX LDS 18 SPECIAL A
ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.
Show moreStarting at: € 26,37 / L -
Klüber Summit SH 55
Quick orderingMore infoKlüber Klüber Summit SH 55
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Klüber Summit SH 55
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 27,66 / L -
Klüber Summit SH 100
Quick orderingMore infoKlüber Summit SH 100
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Application Klüber Summit SH 100
Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.
Show moreStarting at: € 32,66 / L -
Total Dacnis LD 32
Quick orderingMore infoTOTAL DACNIS LD 32
Hydrocracked mineral oils for lubricated screw air compressors.
Applications TOTAL DACNIS LD 32
- Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
- DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
- Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised
Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.
Show more€ 4,28 / L
Screw Compressor Oil: The Silent Force Behind Smoothly Operating Compressors
In the world of e-commerce and industrial production, where efficiency and reliability are essential, screw compressors play a crucial role in delivering compressed air for various applications. However, what is often overlooked is the importance of the right screw compressor oil to keep these machines running smoothly and reliably. In this article, we will delve deeper into the role and benefits of screw compressor oil, why it is vital for e-commerce operations, and how to ensure that your compressors perform optimally.
Why is Screw Compressor Oil Important for Businesses?
Screw compressor oil is essential for several reasons:
-
Optimal Lubrication: Screw compressors operate with narrow tolerances and high rotational speeds. The right oil ensures optimal lubrication, reducing friction and wear, thus extending the machine's lifespan.
-
Cooling and Sealing: The oil not only aids in lubrication but also dissipates heat generated during the compression process. Additionally, it provides sealing between the screws, preventing leakage and improving efficiency.
-
Efficiency and Reliability: Well-lubricated compressors perform more efficiently and reliably, leading to less downtime and improved production capacity for businesses.
-
Longer Machine Lifespan: Using the right screw compressor oil contributes to extending the compressors' lifespan, resulting in cost savings.
How to Choose the Right Screw Compressor Oil for Your Business?
When selecting the right screw compressor oil, there are some key considerations:
-
Viscosity: Choose an oil with the appropriate viscosity that matches your screw compressor's specifications. The viscosity should be suitable for operating conditions, including temperature and load.
-
Additives: Consider whether specific additives, such as antioxidants, anti-foaming agents, and pressure additives, are needed to meet your screw compressor's specific requirements.
-
Maintenance Schedule: Follow the manufacturer's recommended maintenance schedule to ensure that the oil is regularly changed, and performance is maintained.
-
Environmental or Food-Safe Factors: Consider the environmental conditions in which your screw compressor operates. If it operates in a humid environment, choose an oil that provides extra protection against corrosion. For food-producing businesses, where there is a chance of air coming into contact with the food product, opt for a food-safe lubricant.
Questions and Answers
How often should I replace screw compressor oil?
The replacement interval varies depending on usage frequency and your screw compressor's specifications. Generally, it is recommended to change the oil every 3 to 6 months, but this can vary.
What are the signs that my screw compressor oil needs to be replaced?
Signs of worn-out oil include increased friction, abnormal noises, reduced performance, and visible wear on the screws. If you notice any of these symptoms, it's time to replace the oil for optimal performance of your screw compressor.
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt
Our customers value us
"We like your site, it shows that you are experts in lubricants!"
-- Ian Adair
"You deliver quicker than our previous UK supplier!"
-- Cris Scullion
"Surprise to us!
We paid to much in the past"
-- Stuart Wyatt