High temperature & Load

Klüber Klüberplex BEM 41-132

Speciality rolling bearing grease for demanding applications

Application Klüber Klüberplex BEM 41-132

Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings. For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings; cylinder roller bearings; spherical roller bearings or for-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section); textile machines (dry section); electric motors; hot air blowers; drying ovens; air separators in the base materials industry; generators in wind power plants or rolling bearings in vehicle components clutch bearings; generator bearings; water pump bearings; fluid fan bearings

Shell Gadus S3 V460 2 Previous Name: Albida Grease HD 2, Shell Retinax SD 2

Premium multipurpose heavy duty grease

Shell Gadus S3 V460 2 main applications:

• Shell Gadus S3 V460 Greases are used for the grease lubrication of heavy-duty, slow moving bearings used in heavy industries :
• Steel (Continuous casters, Workroll bearings etc)
• Cement
• Paper
• Chemical Industry
• Mining

Shell Gadus S3 V460 Greases are premium, high temperature greases for heavy duty industrial applications. This product is based on high viscosity index mineral oil and a lithium complex soap thickener and contains the latest additives to offer excellent high temperature oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties. Shell Gadus S3 V460 Greases are especially suitable for slow moving, heavy-duty bearings operating at high temperature and under severe load.

Please note!! Price of Shell Gadus S3 V460 2 drops automatically in larger quantities.

Mobil Grease MB 2

Automotive Grease

Application Mobil Grease MB 2

Mobilgrease MB 2 can be used for many automotive applications. It can be used as a single multi purpose grease in fleets, agricultural and construction equipment where MB page 267 specification has been recommended. Mobilgrease MB 2 can also be used in some industrial applications where a non EP grease is suitable. The product has a speed bearing factor of approximately 200,000DmN.

Klüber Klüberplex BEM 41-141

Lubricant for rolling and plain bearings subject to high loads

Application Klüber Klüberplex BEM 41-141

Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations. Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

Klüber Klüberplex BEM 41-141 is particularly widely used in the wind industry for wind turbines.

Klüber Klüberplex BE 31-102

Lubricating greases for extreme requirements

Application Klüber Klüberplex BE 31-102

Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

TOTAL COPAL MS 2

High temperature extreme pressure complex aluminium grease with molybdenum disulfide.

Applications COPAL MS 2

• COPAL MS 2 is suitable for boundary lubrication at high temperatures and heavy loads. In case of accidental overheating, the presence of molybdenum disulfide will guarantee good lubrication and avoid any jamming or sticking.
• Particularly suitable for a variety of industrial and civil engineering applications that work under severe conditions e.g. heavy loads and high temperatures.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL COPAL MS 2 drops automatically in larger quantities.

Shell Gadus S5 T460 1.5 Previous Name: Shell Stamina Grease HDS

Advanced Multipurpose Heavy Duty Grease

Shell Gadus S5 T460 1.5 main applications:

Shell Gadus S5 T460 Grease can be used for the grease lubrication of heavy-duty, slow moving bearings (both sealed & semi sealed) used in machinery found in the following industries:

• • Steel
• • Cement
• • Paper
• • Wind Power

Shell Gadus S5 T460 1.5 Grease is a high performance, high temperature, long life grease for heavy duty industrial applications.
It uses fully synthetic base stocks and the latest technology diurea thickener. It contains the latest additives to offer excellent high temperature oxidation performance and other additives to enhance its anti-oxidation, anti-wear and anti-corrosion properties.
Shell Gadus S5 T460 1.5 Grease is especially suitable for sealed & semi-sealed applications involving slow moving, heavy- duty bearings operating at high temperature and under severe load.

Please note!! Price of Shell Gadus S5 T460 1.5 drops automatically in larger quantities.

Klüber Klüberplex BEM 34-132

Speciality rolling bearing grease for demanding applications

Application Klüber Klüberplex BEM 34-132

Klüberplex BEM 34-132 is used for ball bearings and linear guides, ball screws subject to oscillating motion, high loads and vibration. These may typically be found in: hub units (wheel bearings), shock absorber bearings, water pump bearings and cardan joint bushes in vehicles; guides in machine tools and working machines; linear bearings in wet processing zones of textile machines, paper-making machines, conveyors and pumps Klüberplex BEM 34-132 is also suitable as sealing grease for rolling bearings due to its excellent media resistance.

Klüber Klüberplex BE 31-222

Lubricating greases for extreme requirements

Application Klüber Klüberplex BE 31-222

Klüberplex BE 31-102…-222…-502 are lubricating greases for e.g. rolling and plain bearings, pivoting bearings, small gears. They can also be used as sealing and lubricating greases for labyrinth seals and industrial valves and fittings. These greases are used for the long-term and lifetime lubrication of e.g. rolling bearings in automotive components (water pump bearings, universal joint bushings), wet processing machines in the textile industry (festoon steamers, washing machines), spinning machines (top and bottom rollers of drafting frames), conveyors (load rollers in wet areas), paper machines (especially in wet sections), agricultural and construction machinery, machines in the food processing industry, as well as rolling bearings in electric motors, fans and pumps.

Klüber BARRIERTA L 55/2

High-temperature long-term greases

Application Klüber BARRIERTA L 55/2

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include:

• conveyors (load and turn rollers)
• kiln cart wheel bearings
• calender bearings
• fan bearings
• chain bearings in film stretching stenters

UNISILKON F GLK 112

Special lubricating grease for Bowden cables, seals and plastics

Application UNISILKON F GLK 112

UNISILKON F GLK 112 is primarily used for the lubrication of rubber-metal, plastic-metal or plastic-plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables and belt tensioners. In such applications, UNISILKON F GLK 112 reduces friction, thus preventing annoying squeaking noise.

Klüber POLYLUB GLY 501

Special synthetic lubricating greases for a wide application range

Application Klüber POLYLUB GLY 501

Vehicles Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals. Plain bearings Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form. Gears Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds. Pneumatic installations Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C). Seals Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Klüber UNISILKON GLK 112

Special grease for Bowden cables, seals and plastics

Application Klüber UNISILKON GLK 112

UNISILKON GLK 112 is primarily used for the lubrication of rubber/metal, plastic/metal or plastic/plastic friction pairings. Possible applications are in slideways, seals (also EPDM), Bowden cables. In such applications, UNISILKON GLK 112 reduces friction, prevents squeaking noises and forms a protective layer against atmospheric attack on rubber and plastics. UNISILKON GLK 112 can be used in many components where lifetime lubrication is required.

Klüber BARRIERTA L 25 DL

Special lubricating grease for the lubrication of sensitive plastics and elastomers

Application Klüber BARRIERTA L 25 DL

BARRIERTA L 25 DL is preferably used for lubricating seals in train doors. It has also been used as a special lubricant for optical equipment for many years.

Klüber BARRIERTA L 55/1

High-temperature long-term greases

Application Klüber BARRIERTA L 55/1

Rolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals. Typical applications include: – conveyors (load and turn rollers) – kiln cart wheel bearings – calender bearings – fan bearings – chain bearings in film stretching stenters BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended. Friction points under the influence of media BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases. In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application in – valves, fittings and installations e.g. in the chemical industry – pneumatic components – level gauges, e.g. for fuels or chemicals – seals (static, dynamic) – extraction systems Food-processing and pharmaceutical industries All BARRIERTA L 55 greases are registered as NSF-H1 and are therefore in compliance with FDA 21 CFR § 178.3570. The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant. White-coloured BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in – automatic baking ovens – cooking or frying lines – conveyor systems Plastic-plastic friction points BARRIERTA L 55 greases – irrespective of NLGI grade - are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf. We recommend testing lubricant compatibility with the materials in question prior to series application.

BARRIERTA KM 192

High-temperature and long-term lubricants with good resistance to low temperatures

Application BARRIERTA KM 192

Rolling bearings and guideways BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads. Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload low-power drive units, while on the other hand they withstand temperatures as high as 200°C and beyond. BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering. Valves and seals The BARRIERTA K greases good temperature resistance and their compatibility with plastics and elastomers – which is typical of PFPE lubricants – make them highly suitable for the lubrication of engine valves and seals as are found in hydraulic cylinders. BARRIERTA K greases enable long runtimes with low noise generation and low friction coefficients. The resistance of BARRIERTA KM 192 against brake fluids, type DOT 3, 4, 5 and 5.1, has been confirmed in an individual test. Compatibility with elastomers and plastics BARRIERTA K grease stand out for their neutral behaviour towards elastomers and plastics. Owing to the many different varieties of elastomers and plastics and varying operating conditions, we recommend checking their compatibility with the component material prior to series application.

Mobil Grease XHP 462

Grease

Application Mobil Grease XHP 462

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles. Specific applications: Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings. Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

Mobil Centaur XHP 221

Multipurpose Calcium Sulphonate Complex Grease

Application Mobil Centaur XHP 221

Mobil Centaur XHP 221 is recommended for lubrication of rolling element bearings in machinery operating at high temperatures where resistance to water washing and corrosion are important. Specific examples of such applications include : Wet-end paper machine bearings. Heavily loaded industrial ball and roller bearings. Bearings in steel mill and mining operations.

BARRIERTA I EL-102

High-temperature greases with good long-term characteristics

Application BARRIERTA I EL-102

Rolling and plain bearings operating at elevated temperature BARRIERTA I greases attain long service lives when used in rolling and plain bearings operating under high thermal stress. The fine thickener and the high oil content enable smooth running of bearings also at high speeds and ensure a long life of the lubricated components. Typical fields of application are in film stretchers; textile stenter frames; precision engineering; clean-room engineering (e.g. microchip manufacture) The low vapour pressures of BARRIERTA I greases make them also recommendable for use in fine to ultra-high vacuum. Electrical contacts BARRIERTA I EL-102 and BARRIERTA I MI-202 have proven successful for the long-term lubrication of electrical contacts in high and medium-voltage switchboards. Component tests have shown that plug and unplug forces are consistent without unduly influencing transition resistance. There are no known decomposition products that would have an insulating effect on the contacts. Behaviour towards plastics and elastomers BARRIERTA I greases of all viscosity grades are widely neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially prior to series application