Lubricants

Spirax S3 AX 80W-90 Previous Name: Shell Spirax S3 AX 80W-90

High Performance, GL-5 Axle Oil for General Applications

Spirax S3 AX 80W-90 main applications:

• Automotive differentials
• General gear sets

Shell Spirax S3 AX 80W-90 is a high performance, API GL-5 gear and axle oil for moderate to heavily loaded on and off-road driveline applications requiring SAE 80W-90 oil.

Please note!! Price of Spirax S3 AX 80W-90 drops automatically in larger quantities.

TOTAL EQUIVIS D 46

Detergent hydraulic oil with a high viscosity index

Applications TOTAL EQUIVIS D 46

Any hydraulic system where significant amounts of water in the system cannot be prevented and when it is impossible to drain water. The detergent additive guarantees a high operational reliability even under unfavourable working conditions. High water content in particular. The high viscosity index ensures proper operation of the hydraulic system over a wide temperature range.

Your advantage! Price of TOTAL EQUIVIS D 46 drops automatically in larger quantities.

CASTROL Transmax Manual FE 75W previously Syntrans FE 75W

Fuel Efficient Manual Transmission Fluid

TOTAL EQUIVIS ZS 15

High viscosity index anti-wear hydraulic oils.

Applications TOTAL EQUIVIS ZS 15

• EQUIVIS ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature
• Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

Your advantage! Price of TOTAL EQUIVIS ZS 15 drops automatically in larger quantities.

Mobilgear 600 XP 220

Mobil Gear Oils

Mobil Gear Oils

Most important applications of Mobilgear 600 XP 220 are:

• + Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• + Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• + Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds.
• + Mobilgear 600 XP 220 is approved by Siemens AG for use in Flender gearboxes

Pay attention! Price of Mobilgear 600 XP 220 drops automatically with higher volumes.

Shell Rimula R6 LME Plus 5W-30

Fully Synthetic Heavy Duty Diesel Engine Oil 5W30

Shell Rimula R6 LME Plus 5W-30 main applications:

• On-highway heavy duty applications
• Low emission engine use
   

Shell Rimula R6 LME Plus oil features “Low-SAPS” additive technology and unique anti-wear system. Shell Rimula R6 LME Plus 5W30 is synthetic technology that delivers extended maintenance and fuel economy performance. Suitable for Euro 4, 5, 6 engines.

Pay attention! Price of Shell Rimula R6 LME Plus 5W-30 drops automatically in larger quantities.

Aeroshell Oil W100

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W100

AeroShell W Oils are available in three different viscosity grades: AeroShell Oil W80 - AeroShell Oil W100 - AeroShell Oil W120. The suffix for each grade corresponds to the viscosity of the oil at 2100 F in Saybolt Universal Seconds. AeroShell W Oils are intended for use in four-stroke (fourcycle) certified reciprocating piston engines, including fuelinjected and turbocharged engines. AeroShell W Oils are not recommended for use in automotive engines. For automotive engines converted for use in aircraft, the specific engine manufacturer or the conversion agency should be consulted for proper oil recommendation. Most radial engine operators use AeroShell Oil W120 in warm weather operations with AeroShell Oil W100 or AeroShell Oil W 15W-50 being used in cooler ambient temperatures. AeroShell Oil W100 or AeroShell Oil W 15W-50 are the common choices for most operators of Lycoming and Continental flat engines but, during colder parts of the year, use of AeroShell Oil W80 in place of AeroShell Oil W100 would be an excellent choice. Although some aircraft engine manufacturers and rebuilders/ overhaul agencies suggest in their service bulletins the use of a straight mineral oil in new or newly overhauled engines, other rebuilders or manufacturers, especially for engines such as the Lycoming O-320H and O/LO360E, allow either ashless dispersant or straight mineral oil for break-in, whereas ashless dispersant oils are mandated for break-in for all turbocharged Lycoming engines. Operators should check with engine manufacturers or rebuilders for the correct recommendation for the specific engine and application.

Shell Morlina S2 B 100 Previously Morlina 100

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 100 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 100 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 100 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 100 drops automatically with larger quantities.

Aeroshell Oil W 15W-50

Semi-synthetic lubricating oil for aircraft piston engines.

Application Aeroshell Oil W 15W-50

AeroShell Oil W 15W-50 is intended for use in certified fourstroke cycle aircraft piston engines. AeroShell Oil W 15W-50 is superior to single grade oils in almost every application. It offers easier starting, better lubrication after start-up, reduced wear, reduced corrosion and rusting, and improved cleanliness with oil pressures and temperatures equal to that of single grade SAE 50 oils at fully warmed up conditions. The anti-corrosion additive system is designed to prevent rust or corrosion in all types of aircraft piston engines. In comparative testing of camshaft rusting under high humidity conditions, AeroShell Oil W 15W-50 was almost entirely rust free while other camshafts conditioned on other oils showed sometimes heavy rusting on cam lobes and bearing surfaces.These results indicate that AeroShell Oil W 15W-50 can provide maximum anti-corrosion protection for aircraft piston engines, when combined with proper maintenance practices and proper operating conditions. Because of the improved flow characteristics of AeroShell Oil W 15W-50, operators may observe slightly lower oil temperatures in some aircraft. On larger aircraft, the oil cooler flap will normally compensate for this change. However, in small aircraft, oil temperature could be reduced slightly. Operators should always check the oil temperature to ensure that they are in the range specified by the manufacturer. Most manufacturers recommend cruising oil temperatures between 82 to 930C (180 to 2000 F). Oil temperatures significantly below this range can result in excessive water and fuel contamination in the crankcase.

Aeroshell Oil W100 Plus

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W100 Plus

The advanced additives in AeroShell Oil W100 Plus provide better rust and wear protection than conventional single grades. The additives work as a protective barrier to prevent critical parts from being slowly degraded by rust or wear, especially when an aircraft sits idle. This protection helps keep the camshaft and lifters coated, reducing the likelihood of premature damage and helping operators reach TBO.

RENOLIT CL X2

Water resistant, low temperature grease

RENOLIT CL X2 field of applications:

RENOLIT CL X2 is specifically designed for use in wet or low temperature conditions, including: - Industrial process equipment, Machine tools, Bearings, Tanks/amphibious craft, Lorries, Outboard motors.

Please note!! Price of RENOLIT CL X2 drops automatically in larger quantities.

Spirax S2 ATF AX Previous Name: Shell Donax TA (D-21666)

High Performance ATF, PSF and Hydraulic Oil in Many MAN and Voith Vehicles and ZF Transmissions

Spirax S2 ATF AX main applications:

• Passenger car automatic transmissions
• Heavy duty automatic transmissions
• Power steering units
• Hydraulic power systems

A high quality transmission fluid suitable for many passenger car and heavy duty automatic transmissions, power steering and hydraulic fluid applications.

Please note!! Price of Spirax S2 ATF AX drops automatically in larger quantities.

Q8 da Vinci P 6

A concrete mould release agent designed to give the work-piece a smooth surface finish, whilst ensuring easy release

Applications Q8 da Vinci P 6

The Q8 da Vinci range has been specifically developed for concrete demoulding where the oil creates a layer between the concrete and the mould

This layer is a critical part of the process as the chemistry of the product will cause soap formations at the interface

Q8 da Vinci P 6 is typically used for demoulding of: Prefab sewage pipes, On site elements

Your advantage! Price of Q8 da Vinci P 6 drops automatically in larger quantities.

Q8 Hoffmeister 46

Zinc- and detergent-based hydraulic oil with high viscosity index

Applications Q8 Hoffmeister 46

Q8 Hoffmeister 46 is perfect for usage for hydraulic systems in off-road applications and mobile construction equipment. Thanks to its detergent functionalities, this oil is the ideal solution for hydraulic systems where water and pollution can be a problem. It can be used in the most extreme temperatures: from high to low.

Your advantage! Price of Q8 Hoffmeister 46 drops automatically in larger quantities.

Q8 Rembrandt EP 2

Applications Q8 Rembrandt EP 2

Multi-purpose grease with EP properties for industrial and automotive applications Din 51502 Kpf2 N-25.

Recommended for highly loaded plain- and anti-friction bearings in: draglines, bulldozers, tractors, excavators, trucks, hoisting equipment, winches etc.

Your advantage! Price of Q8 Rembrandt EP 2 drops automatically in larger quantities.

TOTAL MULTIS EP 1

Multi purpose extreme pressure lithium/calcium grease.

Applications TOTAL MULTIS EP 1

• MULTIS EP 1 is a true multi purpose grease, formulated for lubrication of loaded slide-balland roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
• Suitable as general purpose grease for industrial applications requiring a NLGI 1 grade Extreme Pressure grease.
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

Your advantage! Price of TOTAL MULTIS EP 1 drops automatically in larger quantities.

Q8 T 750 15W-40

Mineral API CI-4 and ACEA E7 heavy duty engine oil

Applications Q8 T 750 15W-40

• Q8 T 750 15W-40 is designed for normal or turbocharged or pressurised engines, with or without intercooling. It is recommended for most heavy duty diesel engines for on- and off-highway applications.
• Q8 T 750 15W-40 is a high performance engine oil for heavy duty applications. This product is designed to improve engine durability and prevent deposits. It provides enhanced protection against bore polishing and cam and cylinder wear, reduces maintenance costs and prevents corrosion and foaming. This product meets API CI-4 and ACEA E7 requirements.
  

Q8 Mahler HA SAE 40

High ash gas engine oil

Your advantage! Price of Q8 Mahler HA SAE 40 drops automatically in larger quantities.

Mobil Delvac MX ESP 15W-40

Vehicle Lube Motor oil 

Extra High Performance Diesel Engine Oil

Most important applications of Mobil Delvac MX ESP 15W-40 are:

• + Heavy Duty Diesel Engines including Euro V/VI Modern Low Emissions Vehicles, Utilizing Technologies such as DPF, SCR, CRT, DOC and EGR
• + High-performance diesel applications including turbo-charged designs featuring EGR Technology and diesel applications using older, naturally aspirated conventional designs.
• + On-highway heavy-duty trucking and off-highway including: construction, mining, quarrying, and agriculture.
• + On-highway applications operating in both high speed/high load and short haul pick-up/delivery.
• + Off-highway applications operating in severe low speed/heavy load conditions
• + High performance gasoline engines and mixed fleet operations.
• + Diesel-powered equipment from American, European and Japanese OEMs

Pay attention! Price of Mobil Delvac MX ESP 15W-40 drops automatically with higher volumes.

TOTAL MULTIS COMPLEX EP 3

Multi pressure lithium complex grease for high temperatures

Application TOTAL MULTIS COMPLEX EP 3

TOTAL MULTIS COMPLEX EP is designed for the lubrication of various applications in all types of operating conditions, but especially where operating temperatures are high and the use of conventional lithium greases is limited. TOTAL MULTIS COMPLEX EP is a true “multipurpose” grease, developed for the lubrication of loaded plain, ball and roller bearings, wheel bearings, lubrication points, chassis and various shock-loaded or vibrating applications in transport, agricultural and earth-moving machinery. Suitable as a general high-pressure grease for industrialële applications requiring a grease resistant to elevated temperatures. Always avoid contamination of the grease by dust and/or dirt during application. Preferably use a pneumatic pumping system or cartridges.