Lubricants

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

Q8 Holbein Bio Plus 46 previouslyQ8 Holbein Eco 46

Applications Q8 Holbein Bio Plus 46

Hydraulic systems used in sensitive area’s for which environmentally friendly fluids are recommended.

CASTROL SPHEEROL LC

Long-term Grease

Application CASTROL SPHEEROL LC

Due to its high load carrying capacity and its water resistance Spheerol LZ is suited for the universal use in building site operations and in all transport devices. In addition it can be used in machines of the agricultural and forestry sector and also for demanding grease lubrication points in industrial gearboxes. Spheerol LZ is particularly suited for highly loaded rolling and plain bearings in a wet and dusty environment (e.g. universal joints, wheel hubs, sprockets, steering racks, etc.). The temperature range for this grease lies between - 20 °C and + 120 °C (for a short time even 130°C).

Your advantage! Price of CASTROL SPHEEROL LZ drops automatically in larger quantities.

Castrol Vecton Long Drain 10W-40 E6/E9

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E6/E9

Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E6/E9 drops automatically in larger quantities.

CASTROL Aircol CM 68 previously Aircol PD 68

Rotary Screw Compressor Lubricant

Application CASTROL Aircol CM 68

Aircol CM 68 grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol CM 68 can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol CM 68 compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol CM 68 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. The Aircol CM 68 is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol CM 68 is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol CM 68 meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

CASTROL Hyspin AWH-M 32

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 32

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 32 drops automatically in larger quantities.

Klüber Klüberfood NH1 94-301

Synthetic lubricating grease for the food processing and pharmaceutical industries

Application Klüber Klüberfood NH1 94-301

Klüberfood NH1 94-301 is used for the lubrication of rolling bearings, plain bearings and linear guides, e.g. in blow moulding equipment.

Mobil Univis HVI 13

Hydraulic Oils

Application Mobil Univis HVI 13

Hydraulic systems critical to uniform hydraulic oil viscosity over a wide temperature range. Hydrostatic transmissions and dash pots. They can also be used in fine instruments and other mechanisms where power input is limited and increases in torque due to the lubricant thickening cannot be tolerated. To reduce deposit formation in equipment where close clearance servo-valves are used. Systems where cold start-up and high operating temperatures are typical. Systems requiring a high degree of load-carrying capability and anti-wear protection. Applications where rust and corrosion protection are an asset such as systems where small amounts of water are unavoidable

CASTROL SPHEEROL EPL 3

Bearing grease

Application CASTROL SPHEEROL EPL 3

The Castrol Spheerol EPL 3 comprises general purpose greases designed for plant wide lubrication. The range extends from a Castrol Spheerol EPL 3 for general purpose bearing lubrication to a NLGI 00 (see separate data sheet) semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes.

Castrol Spheerol EPL 3 greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The stiffer consistency afforded by a Castrol Spheerol EPL 3 grade makes this product particularly suitable for the lubrication of bearings that are vertically mounted, or components exposed to a high degree of vibration. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 3 drops automatically in larger quantities.

Shell Gadus S4 V45AC 00/000 Previous Name: Retinax Grease CSZ, Shell Ossagol V

Advanced Multipurpose Grease

Shell Gadus S4 V45AC 00/000 main applications:

• Centralised chassis lubrication systems on trucks and buses or other “one-shot” systems.
• Pneumatic tools.

Shell Gadus S4 V45AC Grease is a fluid grease for use in centralised lubrication systems. This grease is based on highly refined mineral as well as selected synthetic base oils, extreme-pressure and other carefully selected additives to provide excellent protection in all conditions.

Please note!! Price of Shell Gadus S4 V45AC 00/000 drops automatically in larger quantities.

CASTROL HYSPIN HVI 32 previously Castrol Vario HDX 32

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 32

Hyspin HVI 32 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 32 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 32 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 32 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 32 drops automatically in larger quantities.

CASTROL HYSPIN HVI 46 previously Castrol Vario HDX 46

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 46

Hyspin HVI 46 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 46 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 46 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 46 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 46 drops automatically in larger quantities.

CASTROL HYSPIN HVI 68 previously Castrol Vario HDX 68

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 68

Hyspin HVI 68 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 68 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 68 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 68 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 68 drops automatically in larger quantities.

CASTROL HYSPIN HVI 46 D

Detergent Hydraulic Oil

Application CASTROL HYSPIN HVI 46 D

Castrol Hyspin HVI 46 D also incorporates lubricity additives to give smooth slideway motion on the combined hydraulic and slideway lubrication systems of some grinding and gear cutting machine tools. Castrol HLP-D fluids contain detergency additives which maintain dirt and oil oxidation products in suspension, preventing them from settling out and forming deposits which could impair the free operation of valves, leading to erratic system operation. Machine tool manufacturer's are increasingly specifying HLP-D fluids such as Hyspin HVI 46 D, having recognised their advantages in increased system reliability.

Your advantage! Price of CASTROL HYSPIN HVI 46 D drops automatically in larger quantities.

CASTROL HYSPIN DSP 32

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 32

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 32 drops automatically in larger quantities.

CASTROL HYSPIN HVI 100

High Viscosity Index anti-wear Hydraulic oils

Application CASTROL HYSPIN HVI 100

Hyspin HVI 100 oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI 100 exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI 100 has excellent hydrolytic stability and separates rapidly from water contamination.

Hyspin HVI 100 contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments.

Your advantage! Price of CASTROL HYSPIN HVI 100 drops automatically in larger quantities.

Q8 Schumann 68

Ultra-high performance compressor oil

Applications Q8 Schumann 68

All reciprocating- (piston), rotary screw- and vane type compressors Single- and multistage air compressors in both stationary and mobile applications Compressor units operating under severe conditions as well as systems with critical parts such as gears and bearings

Your advantage! Price of Q8 Schumann 68 drops automatically in larger quantities.

Mobil ATF 134

Mobil Passenger Vehicle Lube

Automatic Transmission Fluid

Most important applications of Mobil ATF 134 are:

• + Mobil ATF 134 is recommended for use in the latest generation of Mercedes Benz 7-speed automatic transmission gearboxes. It is approved against MB 236.14.

Your advantage Price of Mobil ATF 134 drops automatically with higher volumes.

Glycoshell Antifreeze 38-concentrate

Antifreeze with high corrosion protection.

Properties

+ Protects engine cooling systems from freezing and corrosive attack.

+ Cost saving through long tool life.

+ "NAP-free"

Klüber Klüberfood NH1 C 6-150

Synthetic oil for chains in can lacquering lines for the food-processing industry

Application Klüber Klüberfood NH1 C 6-150

Klüberfood NH1 C 6-150 may be applied via suitable chain lubrication system. Compatibility of the lubricant with the materials of the reservoir should be checked. To attain the highest performance in curing and lacquering applications please do not hesitate to consult your local Klüber representative. Mixing of Klüberfood NH1 C 6-150 oil with other incompatible or non-food-grade lubricants should be avoided! For object/chain temperatures up to approx. 160 °C as may result from oven temperatures of approx. 300 °C under certain operating conditions. We recommend sufficient air removal under such conditions.