Buy Lubricants — mineral, synthetic, dry & adhesive

Klüber Klüberfood NH1 94-301

Synthetic lubricating grease for the food processing and pharmaceutical industries

Application Klüber Klüberfood NH1 94-301

Klüberfood NH1 94-301 is used for the lubrication of rolling bearings, plain bearings and linear guides, e.g. in blow moulding equipment.

TOTAL CARTER SG 320 previous Carter SY 320

Ultra high performance synthetic gear oil.

Applications TOTAL CARTER SG 320

CARTER SG is a new generation of very high-performance synthetic gear lubricant for standard, crown, planetary, and worm gearboxes. The new polyalkylene glycol base oil technology provides a very high EP performances, very low friction coefficient and high sliding performances.

Your advantage! Price of TOTAL CARTER SG 320 drops automatically in larger quantities.

FUCHS Cassida Chain Oil 320 Spray

Synthetic chain lubricant in spray form for food and beverage processing equipment

Application FUCHS Cassida Chain Oil 320 Spray

Drive and transport chains in the food industry. Slideways, levers, joints and bolts, ropes, spindles and guide pulleys. Also intended for use in equipment manufacturing food packaging

Adrana A 2859 has now been removed from the range and can best be replaced by Hocut 4444. It is wise to contact us and discuss the application.

Please note We will deliver Hocut 4444 instead of Adrana A2859 if you wish to order it above.

Hereby the link for more information about Hocut 4444

Shell PANOLIN S2 Hydraulic EAL 32

For Hydraulic Systems in Environmentally Sensitive Areas

Key applications of Shell PANOLIN S2 Hydraulic EAL 32 include:

• Hydraulic systems in marine, offshore, and industrial sectors
• Applications in environmentally sensitive areas (such as U.S. waters)
• Suitable for systems where biodegradable oils are required

Shell PANOLIN S2 Hydraulic EAL is a biodegradable synthetic hydraulic oil of the HEES type. This oil meets the requirements of the EU Ecolabel and the US EPA Vessel General Permit. It offers excellent wear protection, is formulated ash-free, and contains on average 82% renewable components.

HOUGHTON HOCUT 5019

Water soluble metalworking fluid

Application HOUGHTON HOCUT 5019

HOCUT 5019 is recommended for grinding of cemented tungsten carbide tools where cobalt is used as a binder. The synthetic formula contains a special additive package to prevent dissolution of cobalt by the coolant also contains polymer lubricity additives to improve wheel life and prevent dry evaporation residues on machines. A minimum concentration of 5% is recommended.

Aeroshell Turbine Oil 560

Synthetic lubricating oil for aircraft turbine engines

Application Aeroshell Turbine Oil 560

Changes which have taken place over the last twenty years in engine performance (in terms of improved fuel consumption, higher operating temperatures and pressures) and maintenance practices have resulted in increased severity in lubricant operating conditions. AeroShell Turbine Oil 560 was developed to withstand the hostile environments of today’s high powered, high compression engines in which the older generation of oils can be stressed up to and beyond their thermal limits, as evidenced by oil coking in the high temperature bearing areas. By overcoming the problems associated with using old technology oils in new technology engines, AeroShell Turbine Oil 560: maintains a cleaner engine; provides improved load carrying capacity; reduces maintenance costs; prolongs bearing life in both new and existing engines. In order for military authorities to take advantage of this better performance in military engines the specification MIL-PRF-23699 was re-written to include a "High Thermal Stability" (HTS) grade as well as the Standard (STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is fully approved as an HTS oil. With the advent of the new civil turbine oil specification, SAE AS5780, which has more stringent requirements than the military specification, AeroShell Turbine Oil 560 was approved as a SPC (Standard Performance Capability) oil. With effect from January 1st 2002, AeroShell Turbine Oil 560 has been manufactured with an improved formulation to further enhance its anti-coking performance. AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Klüber ISOFLEX TOPAS NB 152

Synthetic rolling and plain bearing greases

Application Klüber ISOFLEX TOPAS NB 152

ISOFLEX TOPAS NB 52 is a versatile grease for many applications, e.g.

• rolling and plain bearings subject to high speeds and loads, also for low temperatures,
• tooth flanks in precision gears, e.g. bevel gears in milling machines, electromechanical actuators for valves,
• electric contacts and components to reduce insertion forces.

In addition, ISOFLEX TOPAS NB 152 is compatible with many plastics. ISOFLEX TOPAS NB 152 is primarily used for rolling and plain bearings, for example wheel bearings in racing cars, fan bearings, pump bearings. The grease is also suitable for plastic/ plastic or steel/plastic friction points.

Mobilux EP 004

Universally applicable industrial grease EP 004

The most important applications of Mobilux EP 004 are:

• + Mobilux EP 004 are universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 004 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 004 fats are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Please note ! Price Mobilux EP 004 automatically drops with larger quantities.

Previously Houghton Metalina B 200

Synthetic water-miscible coolant (transparent)

Recommended usage concentrations for Hocut 5140 are:

• Round & surface grinding: 3 - 5%
   

Applications Hocut 5140

Hocut 5140 is recommended for surface and cylindrical grinding of cast-iron and ferrous alloys over a broad water hardness range

Your advantage: Price of Hocut 5140 drops automatically with higher volumes.

Mobilux EP 3

Universally applicable industrial grease

Mobilux EP 3

The most important applications of Mobilux EP 3 are:

• + Mobilux EP 3 is universally applicable fats.
• + The recommended use temperature is between -20 C to + 130 C.

Mobilux EP 3 are high-quality, universally applicable industrial lubricants. These lithium-hydroxystearate fats are formulated for high protection against wear, rust, corrosion and the washing away effect of water. Mobilux EP 3 greases are recommended for almost all common industrial applications, including heavily loaded applications with shock loads. The lubricating greases offer very good protection against rust, corrosion and water, making them suitable for humid operating conditions.

Mobil ATF LT 71141

Automatic Transmission Fluid

Application Mobil ATF LT 71141

Mobil ATF LT71141 is designed to meet the specific requirements of automatic transmissions. Mobil ATF LT71141 is used for the AL4 and 4HP20 gear boxes as the automatic transmission fluid.

Renolit LZR 000

Renolit LZR 000 field of applications:

RENOLIT LZR 000 is primarily used in centralized lubricating systems of trucks and commercial vehicles. Furthermore, RENOLIT LZR 000 is usable in low loaded industrial gears.

Please note!! Price of Renolit LZR 000 drops automatically in larger quantities.

Spirax S4 AT 75W-90 Previous Name: Shell Spirax X 75W-90

High performance, synthetic blend, GL-4/5 oil for gearboxes and axles

Spirax S4 AT 75W-90 main applications:

• Automotive transmissions
• Universal driveline

Shell Spirax S4 AT 75W-90 is a part-synthetic superior quality automotive gear lubricant specially designed for use in gearboxes and axles.

Please note!! Price of Spirax S4 AT 75W-90 drops automatically in larger quantities.

Klüber PARALIQ GB 363

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries

Application Klüber PARALIQ GB 363

PARALIQ GB 363 can be used for beverage taps, especially beer taps of all kind, equipped with NBR seals or other elements made of NBR. It does not impair the formation of beer froth or the taste of beer. PARALIQ GB 363 is also suitable for filling installations, filters, stuffing boxes, rubber membranes or seals.

CASTROL SPHEEROL EPL 3

Bearing grease

Application CASTROL SPHEEROL EPL 3

The Castrol Spheerol EPL 3 comprises general purpose greases designed for plant wide lubrication. The range extends from a Castrol Spheerol EPL 3 for general purpose bearing lubrication to a NLGI 00 (see separate data sheet) semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes.

Castrol Spheerol EPL 3 greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The stiffer consistency afforded by a Castrol Spheerol EPL 3 grade makes this product particularly suitable for the lubrication of bearings that are vertically mounted, or components exposed to a high degree of vibration. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 3 drops automatically in larger quantities.

Shell Omala S4 GXV 220 will soon change to GXV Plus

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 GXV 220 main applications:

• Manufacturing and industrial gear systems
• Gear motor systems and other inaccessible installations
• Excellent compatibility with seals, paints and sealants
• Enclosed industrial gear systems

Shell Omala S4 GXV 220 is an advanced synthetic heavy duty industrial gear oil, approved by Siemens AG, offering outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals.

PLANTOHYD 40 N

Environmentally compatible hydraulic and lubricating oils based on natural raw materials, type HETG according to ISO 15380, for mobile and stationary hydraulic equipment

PLANTOHYD 40 N field of applications:

PLANTOHYD 32 N resp. PLANTOHYD 40 N can be used in mobile and stationary hydraulic equipment for which an ISO VG 32 resp. ISO VG 46 hydraulic oil is recommended. The change-over guidelines according to ISO 15380 have to be observed when converting a system to PLANTOHYD N. Repair paints and paints which are not based on 2-component-systems might not be compatible with mineral oil as well as natural raw materials like PLANTOHYD N. The PLANTOHYD N products perform best at tank temperatures between 50 und 60°C. Recommended operating temperature range: -27°C to +70°C.

Please note!! Price of PLANTOHYD 40 N drops automatically in larger quantities.

Houghton MWS Additive AF 2290

MWS Additive AF 2290 is an effective defoamer for water-containing mineral oils and mineral oil-free cooling lubricants. 

Properties

MWS Additive AF 2290 is usually at a concentration of 0.01 - 0.02% . 

Before each new addition is necessary to wait until a thorough mixing has occurred.

The defoamers should be added as long as until a sufficient foam collapse occurred (use concentration max. 0.05%). 

The defoamer is premixed with water or used as an emulsion.

CASTROL Perfecto X 46 previously Perfecto T 46

Turbine oils

Application CASTROL Perfecto X 46

The Perfecto X 46 lubricant is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.