Lubricants

Klübersynth GH 6-680

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-680

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Klübersynth GH 6-80

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-80

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

CASTROL Optileb HY 46

Food grade hydraulic oils

Application CASTROL Optileb HY 46

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

FUCHS Cassida FM Grease HD 1.5

Specialty semi-synthetic heavy-duty greases for food and beverage processing equipmen

Application FUCHS Cassida FM Grease HD 1.5

• Recommended for use in machinery where frequent changes of the grease charge are required or there is high product consumption rate

• Slow and medium speed plain and rolling element bearings

• Heavy-loaded and shock-loaded applications

• Joints, linkages and slides

• Overhead track systems

• May also be used as protective antitrust fi lm and as release agent on gaskets and seals of tank closures

RENOLIN UNISYN XT 220 previous RENOLIN UNISYN CLP 220

Fully-synthetic industrial gear lubricants based on polyalphaolefins

RENOLIN UNISYN XT 220 field of applications:

The oils of the RENOLIN UNISYN XT series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C.

Mobil SHC 632

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 632 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 632 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 632 drops automatically with higher volumes.

Mobil Rarus SHC 1024

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1024 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1024 drops automatically with larger quantities.

Mobil Rarus SHC 1025

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1025 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1025 drops automatically with larger quantities.

Mobil Rarus SHC 1026

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1026 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1026 drops automatically with larger quantities.

Aeroshell Grease 64

AeroShell Grease 64 comprises AeroShell Grease 33 fortified with 5% molybdenum disulphide. It possesses the enhanced anti-wear and anti-corrosion properties of AeroShell Grease 33 with the added EP (Extreme Pressure) properties provided by the addition of a solid lubricant. The useful operating temperature range is –73°C to +121°C.

Application Aeroshell Grease 64

AeroShell Grease 33 has established itself as the answer to most of the airframe’s General Purpose, airframe greasing requirements, being approved for use in Boeing, Airbus and many other aircraft types. It sets the standard with exceptional anti-corrosion and anti-wear performance while allowing aircraft operators to shrink their grease inventory and reduce the risk of misapplication. However, there remains a small number of highly loaded, sliding applications on the airframe where the additional boost of molybdenum disulphide will always be required. To address this need, Shell Aviation has developed AeroShell Grease 64. Sharing the same advanced grease technology as its parent, AeroShell Grease 64 also possesses the extreme pressure (EP) characteristics provided by molybdenum disulphide.

CASTROL Optileb HY 32

Food grade hydraulic oils

Application CASTROL Optileb HY 32

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

CASTROL Optileb HY 68

Food grade hydraulic oils

Application CASTROL Optileb HY 68

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

Shell PANOLIN S4 Hydraulic OS EAL 15

Hydraulic & control line fluid - readily biodegradable, saturated synthetic esters

Application Shell PANOLIN S4 Hydraulic OS EAL 15

Shell PANOLIN S4 Hydraulic OS EAL has a zinc-free additive technology, blended with high-performance fully synthetic saturated esters which provides an excellent blend of lubrication performance and environmental acceptability. Readily biodegradable with a low ecotoxicity, particularly suited for subsea, offshore, and marine applications where compliance is required including US waters.

Klüber Klübersynth BEP 72-82

Rolling bearing grease for long-term lubrication

Application Klüber Klübersynth BEP 72-82

Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.

Mobil SHC Gear 3200

Gear Oils

Application Mobil SHC Gear 3200

Application Considerations: While the Mobil SHC Gear 1500, 3200, and 6800 are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear 1500, 3200, or 6800 lubricants, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC Gear 1500, 3200, and 6800 oils are recommended for all types of enclosed steel-on-steel gear drives. They are suitable for both circulation and splash lubrication systems. They are particularly recommended for gear sets operating under heavy or shock loads and low speeds where boundary lubrication may prevail. Applications for this product family are: Mobil SHC Gear 1500, 3200 and 6800 - Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units. Mobil SHC Gear 1500, 3200 and 6800 - Plain and rolling element bearings, especially in slow speed, and/or high load applications. Mobil SHC Gear 3200 and 6800 - Railroad DC Traction Motor drives. Mobil SHC Gear 3200 and 6800 - Certain open gear applications such as oiling pinions or specially designed circulation systems.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Synthetic industrial gear oil 220 (ISO VG)

Mobil SHC Gear 220 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 220 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 220 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 220 drops automatically with higher volumes.