Lubricants

Cassida Grease EPS 00

Extreme pressure grease for food & beverage processing equipment

Cassida Grease EPS 00 main applications:

• Rolling element and plain bearings
• Joints, linkages and slides
• Recommended for a wide range of applications including; clay and roller element bearings.

Cassida Grease EPS 00 may also be used as protective anti-rust films and as release agents on gaskets and seals of tank closures.

Cassida Grease EPS 00 are high performance extreme pressure lubricants specially developed for the grease lubrication of machinery in the food and beverage processing and packaging industry. Cassida Grease EPS 00 are based on an aluminium complex thickener, synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Previous Shell now Fuchs Cassida Fluid GL 680

Food grade Gear oil 680 NSF H1 certified

Cassida GL 680 is all high performance, food grade, anti-wear gear oil for the lubrication of enclosed gears in food and beverage processing machinery.

Applications of Cassida GL 680 

• Lubrication of enclosed gearboxes used in the food industry.
• Also intended for use in equipment manufacturing food packaging.

 They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Note! Cassida Fluid GL 680 price automatically drops in larger quantities.

Klüber BARRIERTA L 25 DL

Special lubricating grease for the lubrication of sensitive plastics and elastomers

Application Klüber BARRIERTA L 25 DL

BARRIERTA L 25 DL is preferably used for lubricating seals in train doors. It has also been used as a special lubricant for optical equipment for many years.

Klüber Summit SH 68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 68

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

RENISO PG 68

RENISO PG 68 field of applications:

RENISO PG 68 and GL 68 are ultra-dried, synthetic refrigeration oils based on PAG NH3 systems which operate on the principle of direct expansion. They differ in their miscibility with NH3. Suitable for screw and reciprocating piston compressors. RENISO PG 68 and GL 68 are also recommended for the use with hydrocarbon refrigerants.

Please note!! Price of RENISO PG 68 drops automatically in larger quantities.

Klüber Summit PS 200

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 200

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

Foodgrade - Fuchs Cassida Grease RLS 00

Properties

High performance, regular load, synthetic base fluid aluminium complex grease.

Applications

For use on bearings, bushings and linkages on food manufacturing equipment.

Cassida Grease MD 2 RLS 0 and 00 are particulary recommended for centralised lube systems or other similiar systems where an NLGI 2 grease may be difficult to dispense.

Fuchs Cassida Chain Oil 150

Chain lubricant for food & beverage processing equipment.

Fuchs Cassida Chain Oil 150 and 1000 are fully Synthetic high performance, antiwear chain oils which have been specially developed for use in machinery used in the food and beverage processing and packaging industry.

Properties

They are formulated using a careful blend of synthetic fluids and additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Certified by NSF for ISO 21469 and registered by NSF (Class H1) for use where there is potential for incidental food contact.

Products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.

Klüber Contrakor Fluid H 1

Long-term corrosion preventive, effective rust remover

Application Klüber Contrakor Fluid H 1

Corrosion preventive for all metallic surfaces, especially on machines, devices, tools, moulds, wire ropes, vehicles, battery terminals. Especially suitable for the long-term preservation of spare parts stored indoors. Rust remover for all parts affected/immobilised by rust, e.g. screw joints, pins, hinges, slides. The fluid spreads well and thoroughly penetrates the affected surfaces. A light rust film will be dis-solved quickly, severe rust takes somewhat longer. Lubricant For chains, bearings, springs, sliding points, wire ropes, antennas and joints. A thin fluid film is sufficient to ensure reliable reduction of friction and wear. Dehydrating oil, moisture repellent for antenna boxes, ignition timers and ignition cables; in general for machines and devices that are frequently operated under open-air conditions. The fluid penetrates beneath moisture and repels water. Contact oil for clamped and screwed electric contacts and couplings. Ensures reliable passage of current and repels water. Machining fluid to provide cooling in machining pro-cesses without a coolant circuit. Helps to preserve tools and work-pieces and leads to better results. Cleaning and care fluid for penetration and dissolution of dirt, oil residues, scale, etc. Protects bright metal surfaces and preserves the appearance of decorative parts.

Klüber Summit PS 150

Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours

Application Klüber Summit PS 150

Klüber Summit PS oils have been especially designed for the lubrication of screw-type and reciprocating piston compressors. They are used for oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors. Klüber Summit PS oils can be used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit PS oils are used for compressors which do not achieve the desired maintenance intervals when using mineral oils and where the use of fully synthetic oils would be uneconomical due to ingress of contamination or a low number of operating hours per year. Klüber Summit PS 100 can also be used for the lubrication of turbocompressors, whereas Klüber Summit PS 300 and 400 have been especially developed for reciprocating piston compressors. Klüber Summit PS oils offer good oxidation stability due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency.

CASSIDA FLUID CR 100

Compressor lubricants for food manufacturing machinery

CASSIDA FLUID CR 100 main applications:

• Screw and vane compressors
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes

CASSIDA FLUID CR 100 are high performance fluids specially developed for use in rotary screw and vane air compressors used in the food and beverage processing and packaging industry. CASSIDA FLUID CR 100 are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of CASSIDA FLUID CR 100 drops automatically in larger quantities.

CASTROL Optigear Synthetic 800/680

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/680

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

CASTROL Optigear Synthetic 800/320

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/320

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Aeroshell Fluid 31

AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products

Application Aeroshell Fluid 31

AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and missile systems operating from –400 C to +2050 C . This fluid should be considered for use in auto pilots, shock absorbers, brakes, flight control systems, hydraulic servo-controlled systems and other systems using synthetic elastomer seals. An increasing number of aircraft manufacturers now recommend use of this type of fluid in aircraft hydraulic systems in preference to mineral hydraulic oils. This move has been prompted by need to use fluids with better fire resistant properties. AeroShell Fluid 31 is also approved for use in the Honeywell (formerly Garrett) cooling turbine (cabin air compressors). Increasingly this type of hydraulic fluid is being adopted for use in hydraulic systems of military aircraft in place of mineral hydraulic fluids. AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials. AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and 71 and can be used in systems designed to operate with MIL-PRF-5606, MIL-PRF-6083, MIL-PRF-87257 and MILPRF-46170 fluids. Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 31. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

CASTROL Optigear Synthetic 800/220

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/220

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/220 drops automatically in larger quantities.

Klüber HOTEMP 2000

High-temperature lubricating oil

Application Klüber HOTEMP 2000

HOTEMP 2000 is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams. It is not washed off and penetrates well into chain joints and friction points. HOTEMP 2000 is preferably used for temperatures up to approx. 250 °C. A durable, load-carrying lubricant film is attained even at these high temperatures.

Aeroshell Fluid S.8350

AeroShell Fluid S.8350 is an SAE 90 extreme pressure gearbox oil.

Application Aeroshell Fluid S.8350

AeroShell Fluid S.8350 is used for helicopter rotor gears, drive-shafts and pitch control mechanisms and wherever high loads and slow speeds in gears require the use of a 90 EP gear oil. AeroShell Fluid S.8350 is approved for use in various Westland helicopter gearboxes. AeroShell Fluid S.8350 must not be used in engines

CASTROL Optigear Synthetic 800/460

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/460

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Klüber Klüberoil 4 UH1-320 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-320 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.

FUCHS Cassida FM Flushing Fluid 32

Specialty Cleaning and Flushing Concentrate for Heat Transfer Systems operating in the food and beverage industry

Toepassingen FUCHS Cassida FM Flushing Fluid 32

CASSIDA FM FLUSHING FLUID 32 wordt aanbevolen voor gebruik in gesloten warmteoverdrachtsystemen die last hebben van koolstofvorming als gevolg van thermische en oxidatieve degradatie. Kan ook in andere toepassingen als omschakelingshulpmiddel worden gebruikt. Neem in deze gevallen eerst contact op met het FLT productmanagement voor gedetailleerd advies.