Lubricants

Klüber Klüberalfa XZ 3-1

Dispersant, solvent and detergent

Application Klüber Klüberalfa XZ 3-1

As solvent and detergent: Klüberalfa XZ 3-1 may be used to clean friction points prior to the application of PFPE products such as BARRIERTA L55/2. When used on clean surfaces, both the adhesion and the performance of such lubricants are significantly improved. To attain optimum lubrication results, we recommend cleaning the friction point prior to initial application first with white spirit 180/210 and then with Klüberalfa XZ 3-1. Prior to initial lubrication, the friction point should be bright (i.e. free of any residues) and free of dirt particles. As a dispersant: PFPE greases dispersed with Klüberalfa XZ 3-1 are used for minimum-quantity lubrication of bearings, chains, small gears, seals and many other components. With Klüberalfa XZ 3-1, the active substance content in dispersions of the Klüberalfa product family can be adjusted to individual needs without difficulty. Due to its high dispersive capacity, Klüberalfa XZ 3-1 is used as a flushing fluid to remove used PFPE grease from components that are difficult to clean. The cleaned surfaces remain free of grease and bright. It may be advisable to protect them against corrosion after cleaning. Food-processing and pharmaceutical industries: Klüberalfa XZ 3-1 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The product was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberalfa XZ 3-1 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Klüber Paraliq P 100

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 100

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

CASSIDA FLUID GLE 220 

Enhanced performance gear lubricant for food & beverage processing Equipment

CASSIDA FLUID GLE 220 main applications:

• Lubrication of rotary can seaming machines equipped with either enclosed (recirculating) or total loss systems
• Circulating and bearing oil systems where contamination with water or food juice can occur, such as citrus juice extraction machines

CASSIDA FLUID GLE 220 are fully synthetic, high performance, antiwear gear lubricants, specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID GLE 220 drops automatically in larger quantities.

CASSIDA FLUID GLE 150 

Enhanced performance gear lubricant for food & beverage processing Equipment

CASSIDA FLUID GLE 150 main applications:

• Lubrication of rotary can seaming machines equipped with either enclosed (recirculating) or total loss systems
• Circulating and bearing oil systems where contamination with water or food juice can occur, such as citrus juice extraction machines

CASSIDA FLUID GLE 150 are fully synthetic, high performance, antiwear gear lubricants, specifically designed for use in the food and beverage canning industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID GLE 150 drops automatically in larger quantities.

Aeroshell Grease 33

Synthetic grease for aircraft

Application Aeroshell Grease 33

For many years aircraft operators have been seeking to rationalise the greases used on aircraft and to reduce the number of different greases in their inventories. Recently Boeing began research on a new, general purpose, corrosion-inhibiting grease. The aim was for a non-clay based grease that would provide longer life for components and mechanisms and possess improved wear and corrosion resistance. This led to the introduction of the new Boeing Specification BMS 3-33. Owing to the wide range of operating temperatures, loads and other environmental conditions required for various aircraft components, several different types of grease with different desirable properties are used during routine lubrication of aircraft components. Boeing, in developing their BMS 3-33 specification, took account of the properties of the different grease types used on aircraft and wrote a specification for a grease which would provide improved performance and which could be used in the widest possible range of grease applications. AeroShell Grease 33 is approved to BMS 3-33C and offers the improved performance properties required by this specification. AeroShell Grease 33 can be used for routine lubrication on Boeing aircraft where MIL-PRF-23827C or BMS 3-24 is specified. AeroShell Grease 33 can also be used in some applications on Boeing aircraft which require use of MIL-G21164. Other applications on Boeing aircraft which require use of MIL-G-21164 and other greases are being reviewed and in due course Boeing will issue details of the full range of applications. For the current status, refer to the latest issue of Boeing Service Letter "BMS 3-33C General Purpose Aircraft Grease". AeroShell Grease 33 can be used for routine lubrication in applications where MIL-PRF-23827C is specified on aircraft manufactured by McDonnell Douglas, Airbus, BAe Regional Aircraft, Canadair, Lockheed, Embraer, Fokker and Gulfstream (except for wheel bearings, applications above 121°C and sliding applications requiring molybdenum disulphide). Other aircraft manufacturers are evaluating AeroShell Grease 33 with the aim of approving it for use on their aircraft. Operators should regularly check with these manufacturers for the latest status. Use of AeroShell Grease 33 can provide operators with the following benefits: Reduced inventories; Reduced maintenance labour costs; Less chance of product mis-application

CASSIDA FLUID WG 220

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 220 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 220, 320, 460 and 680 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 220 drops automatically in larger quantities.

Aeroshell Turbine Oil 390

AeroShell Turbine Oil 390 is a 3 mm2 /s synthetic diester oil incorporating a carefully selected and balanced combination of additives to improve thermal and oxidation stability and to increase the load carrying ability of the base oil.

Application Aeroshell Turbine Oil 390

AeroShell Turbine Oil 390 was developed primarily as an improved 3 mm2 /s oil for British turbo-jet engines. AeroShell Turbine Oil 390 is fully approved for a wide range of turbine engines. · More recently, because of the low temperature characteristics of AeroShell Turbine Oil 390, there is interest in using this oil in auxiliary power units (APU) in order to overcome the effects of cold soak. Normal practice is to shut down the APU during cruise, the APU then experiences cold soak, often prolonged, and when the unit is started there is considerable difficulty resulting in the unit not coming up to speed in the given time, thus causing a hung start. In such cases where the APU is subject to a long cold soak the viscosity of standard 5 mm2 /s oils used in the APU will increase from 5 mm2 /s at 100°C to typically 10,000 mm2 /s at –40°C . At this much higher viscosity the oil cannot flow easily leading to a large viscous drag within the APU, thereby contributing to the difficulty in starting. AeroShell Turbine Oil 390 on the other hand experiences a much smaller viscosity increase (typically 2000 mm2 /s at –40°C ) with a reduction in viscous drag which is often sufficient to overcome hung start problems. All experience to date shows a considerable improvement in cold reliability of the APU when AeroShell Turbine Oil 390 is used.

Foodgrade Fuchs Casssida Fluid WG 680

Properties

Fully synthetic, high-performance gear lubricants for worm gear boxes.

High resistance to micro-pitting. Provides exceptional thermal stability and corrosion protection. Exceptional low-friction characteristics providing efficient power transmission. 

Meets DIN 51717 CLP and ISO 6743.

CASSIDA FLUID WG 320

High performance, synthetic gear lubricant for worm gear boxes used in the food & beverage processing equipment

CASSIDA FLUID WG 320 main applications:

• Especially recommended for use in worm gears and applications where excellent thermal stability is required
• Lubrication of enclosed gear boxes used in the food industry
• High load carrying capability, for extreme pressure applications

CASSIDA FLUID WG 320 are high performance, anti-wear gear oils for the lubrication of worm gears, highly loaded gears and applications where high resistance to micro-pitting is needed, for the use in food and beverage processing equipment. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food & beverage industry.

Your advantage! Price of CASSIDA FLUID WG 320 drops automatically in larger quantities.

Klüber Paraliq P 460

Lubricating oils for the food-processing and pharmaceutical industries

Application Klüber Paraliq P 460

For all oil-lubricated friction points in the food-processing and pharmaceutical industries, e.g. gears, bearings, chains, spindles, joints. PARALIQ P 68 is also suitable for deep-drawing of aluminium foils. PARALIQ P 1500 can also be used for the lubrication of lifting, drive and conveyor chains.

FUCHS Cassida Grease GTX 0

Specialty synthetic heavy-duty greases for food and beverage processing equipment

Application FUCHS Cassida Grease GTX 0

Lubrication of steam dryers, electric motors, pumps, conveyors, mixers, gear units and bearings. Low to medium speed bearings operating under adverse conditions. Heavy-loaded and shock-loaded applications. May also be used as protective anti-rust film and as release agent on gaskets and seals of tank closures

Shell Naturelle Grease S2 A600P 1.5 previously Naturelle S2 Wirerope lubricant A

Special Purpose Biodegradable Special Application, Wire Rope and Open Gear Lubricant

Application Shell Naturelle Grease S2 A600P 1.5

Wire ropes and cables, fair leads, crane and davit wires Open gears, and low speed plain bearings (less than 500 rpm). Rudder stocks, rudder trunk voids, propeller caps. Dredger bucket wheels. Can be used in a variety of equipment that requires the lubricant to have good water resistance and load carrying ability

Foodgrade - Fuchs Cassida Fluid WG 460

Properties

Fully synthetic, high-performance gear lubricants for worm gear boxes. High resistance to micro-pitting. Provides exceptional thermal stability and corrosion protection. Exceptional low-friction characteristics providing efficient power transmission.

Meets DIN 51717 CLP and ISO 6743.

Klüber Klüberoil YF 100

High-temperature chain oil

Application Klüber Klüberoil YF 100

Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.

RENISO TRITON SE 170

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 170 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 170 drops automatically in larger quantities.

Klüber ISOFLEX PDL 300 A

High-performance grease for rolling bearings operating at low temperatures

Application Klüber ISOFLEX PDL 300 A

ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.

Mobil Nuto H 32

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 32 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 32 drops automatically with higher volumes.

Q8 Gluck M

Advanced heat transfer oil

Applications Q8 Gluck M

Q8 Gluck M is used in closed heat transfer systems operating at bulk temperatures of max 330°C.

Your advantage! Price of Q8 Gluck M drops automatically in larger quantities.

Q8 Haydn 150

Applications 

Q8 Haydn 150 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 150

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive is part of Q8 Haydn 150 formulation

Long service life due to high thermal and oxidation stability for high temperature applications

Trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears