Lubricants

Shell Naturelle Grease S2 A600P 1.5 previously Naturelle S2 Wirerope lubricant A

Special Purpose Biodegradable Special Application, Wire Rope and Open Gear Lubricant

Application Shell Naturelle Grease S2 A600P 1.5

Wire ropes and cables, fair leads, crane and davit wires Open gears, and low speed plain bearings (less than 500 rpm). Rudder stocks, rudder trunk voids, propeller caps. Dredger bucket wheels. Can be used in a variety of equipment that requires the lubricant to have good water resistance and load carrying ability

FUCHS Cassida Grease GTX 0

Specialty synthetic heavy-duty greases for food and beverage processing equipment

Application FUCHS Cassida Grease GTX 0

Lubrication of steam dryers, electric motors, pumps, conveyors, mixers, gear units and bearings. Low to medium speed bearings operating under adverse conditions. Heavy-loaded and shock-loaded applications. May also be used as protective anti-rust film and as release agent on gaskets and seals of tank closures

Foodgrade - Fuchs Cassida Fluid WG 460

Properties

Fully synthetic, high-performance gear lubricants for worm gear boxes. High resistance to micro-pitting. Provides exceptional thermal stability and corrosion protection. Exceptional low-friction characteristics providing efficient power transmission.

Meets DIN 51717 CLP and ISO 6743.

Klüber Klüberoil YF 100

High-temperature chain oil

Application Klüber Klüberoil YF 100

Klüberoil YF 100 is suitable for the lubrication of transport chains used in the food processing industry, e.g. plate carrier chains in bread baking ovens. It can also be used on drive and control chains in melting furnaces used in the metal industry and on other chains subject to high temperatures.

RENISO TRITON SE 170

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 170 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 170 drops automatically in larger quantities.

Klüber ISOFLEX PDL 300 A

High-performance grease for rolling bearings operating at low temperatures

Application Klüber ISOFLEX PDL 300 A

ISOFLEX PDL 300 A is suitable for plain and rolling bearings, and for sliding points such as cams, bolts, meters, cam plates, and adjusting rings used in automotive, telecommunications and precision engineering, in instruments, and in cryotechnology applications.

CASTROL BioTac MP

Environmentally responsible multipurpose EP grease

Unfortunately no longer available

We recommend this replacement Shell Naturelle Grease S2 A600P 1.5

Application CASTROL BioTac MP

BioTac MPTM has been developed primarily for use on exposed marine deck applications and combines excellent physical properties that enable resistance to both mechanical shear and water spray-off with an additive system developed to protect exposed components from corrosion, oxidation and the effects of load, friction and wear. BioTac MPTM is intended for use in a wide range of applications including plain bearings, wire ropes and open gears typically found in marine mooring and cargo winches. Furthermore, ramp door bearings, pedestal bearings and cargo hatch rollers are also examples of slow/medium speed marine deck applications for which BioTac MPTM is ideally suited. The combination of thickener and base oil technology enables BioTac MPTM to have a broad operating temperature range of between -35C and +125C.

Mobil Nuto H 32

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 32 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 32 drops automatically with higher volumes.

Q8 Gluck M

Advanced heat transfer oil

Applications Q8 Gluck M

Q8 Gluck M is used in closed heat transfer systems operating at bulk temperatures of max 330°C.

Your advantage! Price of Q8 Gluck M drops automatically in larger quantities.

Q8 Haydn 150

Applications 

Q8 Haydn 150 hydraulic oils are recommended for all machine tool hydraulic systems, particularly where superior anti-wear and filterability are of prime importance. Also recommended for hydraulic control systems and robotics where oil quality is essential for accuracy and consistency.

Summary of Main Features and Benefits of Q8 Haydn 150

Optimum anti-wear performance, based on a zincdiakyldithiophosphate additive is part of Q8 Haydn 150 formulation

Long service life due to high thermal and oxidation stability for high temperature applications

Trouble-free operation due to the unique combination of outstanding demulsibility, foam, air release, hydrolytic stability and filterability characteristics

Can also be applied in other industrial equipment such as screw-air compressors and not severely loaded gears

Carix Premium Ready To Use -38C

Blue Anti-freeze with Corrosion Protection down to -38C

Carix Premium Ready To Use engine coolant is based on ethylene glycol. It contains a hybrid blend of corrosion inhibitors with salts based on organic acids and silicates. Carix Premium Diluted does not contain nitrites, amines or phosphates.

Carix Premium Ready To Use is designed to protect car truck and bus engines from corrosion and freeze damage. It contains a blend of inibitors designed to provide a high level of corrosion protection for engine components such as radiators, cylinder blocks/heads and water pumps.

It more than meets the requirements of the following standards: ASTM D3306, BS 6580:2010, AFNOR NF R15-601, ASTM 4985, SAE J1034 and ÖNORM V5123.

CASTROL Optigear Synthetic 800/100

Synthetic Gear Oils

Application CASTROL Optigear Synthetic 800/100

The Optigear Synthetic 800 range is especially suited to reservoirs and circulation systems operating at high temperatures because of heat generated in severe service or high temperatures in the application. Optigear Synthetic 800 are intended for all types of heavily loaded gears including spur, bevel and worm gears. Although well suited for all types of gearing and bearings, the Optigear Synthetic 800 range is particularly effective in controlling wear and reducing friction between sliding surfaces. In addition, they possess a high degree of affinity for cupric metal alloys.

Your advantage! Price of CASTROL Optigear Synthetic 800/100 drops automatically in larger quantities.

Klüber Summit Ultima 68

Synthetic air compressor oils for oil change intervals up to 12,000 operating hours

Application Klüber Summit Ultima 68

Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.

Klüber Summit DSL 46

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 46

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Mobil Nuto H 46

Mobil Industrial hydraulic oil

Most important applications of Mobil Nuto H 46 are:

• + Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
• + Where hydraulic oil contamination or leakage is unavoidable
• + Where small amounts of water are unavoidable

Pay attention! Price of Mobil Nuto H 46 drops automatically with higher volumes.

Shell Risella X 415

GtL Technical White Oil

Klüber Tyreno Fluid 12/25V

High-performance vacuum pump oils for fine- and high-vacuum applications

Application Klüber Tyreno Fluid 12/25V

Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.

Klüber Tyreno Fluid 6/14V

High-performance vacuum pump oils for fine- and high-vacuum applications

Application Klüber Tyreno Fluid 6/14V

Klüber Tyreno Fluids are tried-and-tested as filling fluids in mechanical backing pumps, diffusion pumps and turbomolecular pumps by leading OEMs. They are also suitable for pumping gasous oxygen. Klüber Tyreno Fluids have been tested as filling fluids according to the Autogeneous Ignition Temperature (AIT) procedure. Klüber Tyreno Fluids can also be used as vapour-resistant, chemically inert transmission fluid in dry-running screw-type pumps. Klüber Tyreno Fluids can also be used as sliding agent for the lubrication of valves, fittings and installations carrying gaseous oxygen or for chemical plants and apparatus requiring good resistance to various gases (conclusion by analogy based on chemical composition. For this purpose, we recommend users conduct their tests using the complete component under conditions similar to series application. Test results show the products' usability for an O2 content > 21 % by vol. under operating conditions specified in the product data section of this product information leaflet. Behaviour towards metal, elastomers and plastics Klüber Tyreno Fluid 3/6V, 6/14V, 12/25V are normally neutral towards metallic materials, plastics and elastomers within the envisaged temperature range. Nevertheless, we recommend checking the compatibility of the product with materials prior to the introduction of this product.

CASTROL HYSPIN AWS 15

Anti-wear Hydraulic Oil

Application CASTROL HYSPIN AWS 15

Castrol Hyspin AWS 15 has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Castrol Hyspin AWS 15 has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits.

In addition, Castrol Hyspin AWS 15 provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Castrol Hyspin AWS 15 is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials

Castrol Hyspin AWS 15 is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM 22

Your advantage! Price of CASTROL HYSPIN AWS 15 drops automatically in larger quantities.

Klüber Klüberoil 4 UH1-1500 N

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries

Application Klüber Klüberoil 4 UH1-1500 N

Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.