Lubricants

TOTAL PRESLIA GT 46

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 46

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 46 drops automatically in larger quantities.

RENOLIN MR 20 VG 68

Special lubricating and hydraulic fluids with excellent corrosion protection

RENOLIN MR 20 VG 68 field of applications:

RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.

Please note!! Price of RENOLIN MR 20 VG 68 drops automatically in larger quantities.

Q8 Mahler GR5 SAE 40

High performance stationary gas engine oil, based on premium hydrocracked base oil (synthetic base oil)

Applications Q8 Mahler GR5 SAE 40

Synthetic based gas engine oil for stationary gas engines operating at mild to severe conditions

Increased demands for lower emissions and higher efficiency in today's gas engines require more oxidation stable engine oils, capable of controlling liner cleanliness and oil consumption at increased liner and piston ring temperatures. Q8 Mahler GR5 has been specifically developed to satisfy these needs.

Your advantage! Price of Q8 Mahler GR5 SAE 40 drops automatically in larger quantities.

Q8 Mahler G8 SAE 40

High/medium ash gas engine oil

Your advantage! Price of Q8 Mahler G8 SAE 40 drops automatically in larger quantities.

Q8 Mahler G10 SAE 40

High ash gas engine oil

Your advantage! Price of Q8 Mahler G10 SAE 40 drops automatically in larger quantities.

Q8 Ravel BW

Low viscosity short-term rust preventive fluid

Applications Q8 Ravel BW

Q8 Ravel BW is a high quality indoor protection fluid for the protection of non-ferrous and ferrous components and assemblies where the use of a solvent cutback product is not permitted because of fire hazards. The film provides effective short-term protection against corrosion especially for indoor intermediate storage. The Q8 Ravel BW can be applied by dipping, rolling or spraying leaving a thin oily layer. The water removing properties are more effective when the components are dipped into the oil tank. It can be easily removed with a solvent or alkaline cleaner.

Your advantage! Price of Q8 Ravel BW drops automatically in larger quantities.

Spirax S3 AM 80W-90 Previous Name: Shell Spirax MX 80W-90

High performance, GL-4/5 Universal Gear Oil for MAN, ZF, MACK and Scania

Spirax S3 AM 80W-90 main applications:

• Passenger car automatic transmissions
• Heavy duty automatic transmissions
• Power steering units
• Hydraulic power systems

Shell Spirax S3 AM 80W-90 is a true universal driveline oil designed for use in modern heavy duty axles and gearboxes offering the convenience of one transmission oil for the whole driveline. Specially optimised mineral base oils and new additive technology improve lubrication of the drive train and potentially extend oil drain intervals. For e.g. MAN, ZF, MACK and Scania.

Please note!! Price of Spirax S3 AM 80W-90 drops automatically in larger quantities.

Q8 Transformer Oil U

Uninhibited transformer oil

Applications Q8 Transformer Oil U

This product can be used in all types of oil-filled electrical equipment, including power and distribution transformers and switchgear.

Shell Morlina S1 B 150 previously Shell Vitrea 150

Industrial Bearing & Circulating Oils

Application Shell Morlina S1 B 150

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications.

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

Shell Morlina S2 B 320 Previously Morlina 320

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 320 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 320 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 320 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 320 drops automatically with larger quantities.

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.

Shell Morlina S1 B 320 previously Shell Vitrea 320

Industrial Bearing & Circulating Oil

Application Shell Morlina S1 B 320

Machine circulation systems

Oil lubricated bearings. Suitable for most plain and rolling element bearings in general industrial applications

Roll-neck bearings

Enclosed industrial gear systems. Low or moderately loaded enclosed gears where EP performance is not required

CASTROL HYSPIN DSP 22

Detergent Hydraulic Oil

Application CASTROL HYSPIN DSP 22

For hydraulics operating under high pressures and temperatures and additional high requirements on the deterging properties.

Your advantage! Price of CASTROL HYSPIN DSP 22 drops automatically in larger quantities.

CASTROL Radicool SF Premix

Ready to use antifreeze coolant

Application CASTROL Radicool SF Premix

The special inhibitor package used in Castrol Radicool SF Premix enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF Premix possesses a longer operational life by allowing extended drain intervals of up to 5 years. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF Premix provides excellent protection against cavitation corrosion and effective water pump lubrication, reducing wear and noise. The additive technology used in Castrol Radicool SF Premix prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing possibility of radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures. Castrol Radicool SF Premix contains a bittering agent to deter from accidental ingestion

Shell Rimula R6 ME 5W-30

Fully Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 ME 5W-30 main applications:

• On-highway heavy duty applications
• Low emission engine use

Shell Rimula R6 ME 5W30 oils deliver highly responsive protection, enhanced fuel economy with no compromise in durability, maintenance saving, long drain performance coupled with protection against soot induced wear, piston and engine deposits.

Please note!! Price of Shell Rimula R6 ME 5W-30 drops automatically in larger quantities.

Eni I-Sint MS 5W-30

Synthetic motor oil for cars and light commercial vehicles

The main applications of Eni I-Sint MS 5W-30 are:

• The oil meets the specifications of ACEA C3, API SN, and BMW Longlife-04.
• It has a viscosity grade of 5W-30, which means it has a low viscosity at low temperatures, providing faster lubrication during cold starts and reducing fuel consumption.
• It has high thermal stability, making it more resistant to oxidation and reducing the formation of deposits.
• It offers excellent protection against wear and corrosion, contributing to a longer engine life.
• It provides good protection for exhaust gas after-treatment systems such as diesel particulate filters (DPF) and catalytic converters.
• It is suitable for both gasoline and diesel engines with direct injection.

TOTAL CIRKAN RO 32

R and O type machine oils.

Applications CIRKAN RO 32

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:

• fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
• viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

Your advantage! Price of TOTAL CIRKAN RO 32 drops automatically in larger quantities.

Shell Morlina S2 B 680 Previously Morlina 680

Industrial oil for bearing and circulation lubrication

Main applications of Shell Morlina S2 B 680 are :

• + Industrial circulation systems
• + General bearing lubrication
• + Roll-neck bearings
• + Closed industrial gearboxes
  

Shell Morlina S2 B 680 are high-quality oils that provide exceptional protection against oxidation and water-separating capacity in most industrial bearings and circulation systems and other industrial applications; le applications where 'EP' performance is not required. Shell Morlina S2 B 680 oils meet the requirements of Morgan Construction Company and Danieli for general bearing lubrication.

Please note ! Price Shell Morlina S2 B 680 drops automatically with larger quantities.

Aeroshell Fluid 12

Synthetic lubricating oil for general purpose aircraft use

Application Aeroshell Fluid 12

AeroShell Fluid 12 is used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. AeroShell Fluid 12 is particularly suitable for use when an oil with a low evaporation rate is required at high and low temperatures. AeroShell Fluid 12 is a synthetic oil and it should not be used in contact with incompatible seal materials such as neoprene or natural rubber. Suitable seal materials include Fluorocarbon (Viton). AeroShell Fluid 12 may also affect certain paints and plastics. It is recommended that components are evaluated for compatibility if there is any question.

Klübersynth G 4-220

Synthetic high-performance gear oil

Application Klübersynth G 4-220

Klübersynth G 4 was especially developed for the lubrication of spur, bevel and planetary gears. It can also be used for plain and rolling bearings.