Lubricants

Castrol Perfecto HTS 16

Synthetic heat transfer fluid

Application Castrol Perfecto HTS 16

Perfecto HTS 16 is suitable for heat transfer systems without pressure operating in liquid phase with bulk temperatures up to 350°C, where the film temperature may not exceed 370°C. In order to extend the economic life of the liquid, the temperature of the expansion vessel must be kept below 50°C. The temperature of the expansion vessel must be kept at a maximum of 370°C. At higher temperatures it is advisable to use a nitrogen blanket. Detailed information can be found in the brochure which contains data on specific heat and thermal conductivity, among other things.

Your advantage! Price of Castrol Perfecto HTS 16 drops automatically in larger quantities.

Castrol Perfecto HTS 16

Synthetic heat transfer fluid

Application Castrol Perfecto HTS 16

Perfecto HTS 16 is suitable for heat transfer systems without pressure operating in liquid phase with bulk temperatures up to 350°C, where the film temperature may not exceed 370°C. In order to extend the economic life of the liquid, the temperature of the expansion vessel must be kept below 50°C. The temperature of the expansion vessel must be kept at a maximum of 370°C. At higher temperatures it is advisable to use a nitrogen blanket. Detailed information can be found in the brochure which contains data on specific heat and thermal conductivity, among other things.

Your advantage! Price of Castrol Perfecto HTS 16 drops automatically in larger quantities.

Synthetic industrial gear oil 680 (ISO VG)

Mobil SHC Gear 680 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 680 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 680 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 680 drops automatically with higher volumes.

Shell Transmission MA 75W-90

Shell Transmission MA is a fully synthetic gearbox oil designed to fulfil the latest Mercedes Benz heavy duty transmission requirements. 

Applications

Heavy duty gearboxes fitted with synchromesh, in particular for those working under very severe load and operation conditions and therefore where the oil temperature is usually high.

This product is particularly designed to meet the latest Mercedes Benz heavy duty transmission requirements and can be used where this manufacturer recommend an approved lubricant according to the Sheet 235.11.

Transmission MA can also be recommended for passenger car gearboxes including Transaxle design.

Approvals

API Service Classification GL-4
Mercedes Benz Sheet 235.11

GadusRail S4 High Speed EUFR Previous Name: Nerita Grease 2858

Advanced Railroad Axle Box Grease

GadusRail S4 High Speed EUFR main applications:

• Rail High speed European axle box applications where extended service intervals are required to reduce maintenance costs.
   

Please note!! Price of GadusRail S4 High Speed EUFR drops automatically in larger quantities.

Shell Naturelle S4 Stern Tube Fluid 100

Special Purpose Biodegradable Synthetic Stern Tube Fluid

Shell Naturelle S4 Stern Tube Fluid 100 main applications:

Shell Naturelle S4 Stern Tube Fluid 100 is designed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid is designed to offer superior lubrication performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP)

Pay attention! Price of Shell Naturelle S4 Stern Tube Fluid 100 drops automatically in larger quantities.

Shell Naturelle S4 Stern Tube Fluid 100

Special Purpose Biodegradable Synthetic Stern Tube Fluid

Shell Naturelle S4 Stern Tube Fluid 100 main applications:

Shell Naturelle S4 Stern Tube Fluid 100 is designed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid is designed to offer superior lubrication performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP)

Pay attention! Price of Shell Naturelle S4 Stern Tube Fluid 100 drops automatically in larger quantities.

BARRIERTA I EL-102

High-temperature greases with good long-term characteristics

Application BARRIERTA I EL-102

Rolling and plain bearings operating at elevated temperature BARRIERTA I greases attain long service lives when used in rolling and plain bearings operating under high thermal stress. The fine thickener and the high oil content enable smooth running of bearings also at high speeds and ensure a long life of the lubricated components. Typical fields of application are in film stretchers; textile stenter frames; precision engineering; clean-room engineering (e.g. microchip manufacture) The low vapour pressures of BARRIERTA I greases make them also recommendable for use in fine to ultra-high vacuum. Electrical contacts BARRIERTA I EL-102 and BARRIERTA I MI-202 have proven successful for the long-term lubrication of electrical contacts in high and medium-voltage switchboards. Component tests have shown that plug and unplug forces are consistent without unduly influencing transition resistance. There are no known decomposition products that would have an insulating effect on the contacts. Behaviour towards plastics and elastomers BARRIERTA I greases of all viscosity grades are widely neutral towards elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially prior to series application

Shell Naturelle S4 Gear Fluid 150

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Application Shell Naturelle S4 Gear Fluid 150

Marine propulsion drives, thrusters and controllable pitch propellers. Industrial gears, bearings and other components in circulated and splash lubricated systems

Shell Naturelle S4 Gear Fluid 100 

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Shell Naturelle S4 Gear Fluid 100 main applications:

• Marine propulsion drives, thrusters and controllable pitch propellers
• Industrial gears, bearings and other components in circulated and splash lubricated systems
  
  

Shell Naturelle S4 Gear Fluid 100 is an advanced synthetic fluid for use in gearing applications such as thrusters and propulsion drives. Manufactured from fully saturated esters, Shell Naturelle S4 Gear Fluid 100 is designed to offer superior load carrying performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Gear Fluid 100 is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit

Please note!! Price of Shell Naturelle S4 Gear Fluid 100 drops automatically in larger quantities.

Klüber Tyreno Fluid M-60VD

For high vacuum applications

Application Klüber Tyreno Fluid M-60VD

Working fluid for all types of diffusion pumps. It ensures high pump speeds and a very low ultimate pressure (up to 2 · 10–9 mbar with N2 cold trap).

Shell Turbo S5 DR 46

Fire-resistant hydraulic lubricating oil for turbines

Application Shell Turbo S5 DR 46

Hydraulic Fluid. Shell Turbo S5 DR 46 has been developed, among other things, for use in electro-hydraulic control (EHC) systems of steam and gas turbines. Lubrication of steam and gas turbines. Shell Turbo S5 DR 46 can be used as a lubricant for the main bearings in steam and gas turbines, generators and cooling pumps. As a precautionary measure, compatibility with system components should be verified.

Klüber GRAFLOSCON C-SG 2000 ULTRA

Operational lubricant for open drives

Application Klüber GRAFLOSCON C-SG 2000 ULTRA

GRAFLOSCON C-SG 2000 ULTRA is designed for spray lubrication of open pinion gears exposed to extremely high tooth flank loads on rotary kilns, tube mills, and line blenders which are used in the cement, lime, gypsum, mining, and chemical industries. GRAFLOSCON C-SG 2000 ULTRA is also suitable for drives exposed to high oscillations or drives in which rolling bearings are mounted. It lubricates and protects all other open gears, drives subject to high thermal loads (spur and bevel gears) as well as slide and guide rails, large chains, wire ropes and similar devices. GRAFLOSCON C-SG 2000 ULTRA is especially suitable for application under hot climatic conditions and in heated spray systems.

Klüber GRAFLOSCON B-SG 00 ULTRA

Running-in lubricant for open drives

Application Klüber GRAFLOSCON B-SG 00 ULTRA

GRAFLOSCON B-SG 00 ULTRA was especially developed for specific running-in of open gears in rotary kilns, tube mills, and line blenders used in the cement, lime, gypsum, mining and

Shell Naturelle Transformer Fluid S4 I

Advanced synthetic electrical insulating fluid

Applications Shell Naturelle Transformer Fluid S4 I

Industrial transformers. Electrical insulating fluid for power and distribution transformers, which may have advanced requirements regarding environment and fire protection e.g traction transformers and wind turbine applications.

Transformers in electrical locomotives. Insulating and cooling fluid for mobile railroad transformers.