32 mm2/sec ISO VG Öle

Mobil EAL Hydraulic 32

High Performance Synthetic Hydraulic Oil

Application Mobil EAL Hydraulic 32

In systems where readily biodegradable and minimally toxic fluids may be required. Hydraulic applications where a reduction in energy consumption is desired. Circulation systems containing gears and bearings where mild extreme-pressure characteristics are desired. Systems containing servo-valves, where cleanliness is essential. Hydraulic systems operating with oil temperatures in the range of -17 °C (1.4° F) to +93 °C (199° F). Mobile, marine and forestry equipment operating in environmentally sensitive areas. Circulation systems operating under mild to moderate service conditions. Industrial hydraulic systems where leaked or spilled fluids could get into plant effluent.

TOTAL BIOHYDRAN SE 32

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 32

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 32 drops automatically in larger quantities.

Mobil SHC 632

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 632 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 632 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 632 drops automatically with higher volumes.

CASTROL Optileb HY 32

Food grade hydraulic oils

Application CASTROL Optileb HY 32

For the special applications in the food and beverage industries where there may be exposure of the lubricated part to the edible product or its packaging For hydraulic systems in production, filling and packaging machines

Klüber Summit SH 32

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 32

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

FM HEAT TRANSFER FLUID 32

Heat transfer fluid for use in food manufacturing industry

FM HEAT TRANSFER FLUID 32 main applications:

• Heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil fi lm temperature) should not exceed +340 °C.

FM HEAT TRANSFER FLUID is designed for closed circuit and pressureless heat transfer systems. It is based on a careful blend of highly refi ned oils and additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of FM HEAT TRANSFER FLUID 32 drops automatically in larger quantities.

Klübersynth GH 6-32

Synthetic high-performance gear and high-temperature oil with KlüberComp Lube Technology

Application Klübersynth GH 6-32

Klübersynth GH 6 oil was especially developed for the lubrication of worm gears with steel/bronze or steel/grey cast iron pairings. Klübersynth GH 6 oil is also used for the lubrication of bevel and spur gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures. It can also be used for the lubrication of lifting, drive and transport chains

Mobil SHC Gargoyle 32 previously Mobil SHC Gargoyle 32

Refrigeration compressor oils

Application Mobil SHC Gargoyle 32

Application considerations: Mobil SHC Gargoyle 32 oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil SHC Gargoyle 32 oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

Cassida Fluid HF 32 Previous Name: Shell Cassida 32

Hydraulic fluids for food manufacturing machinery

Cassida Fluid HF 32 main applications:

• Hydraulic systems
• Hydrostatic gears
• Plain and anti-friction bearings
• General purpose lubrication including light duty gearboxes
• Circulating oil systems

Cassida Fluid HF 32 are high performance, anti-wear multipurpose lubricants, specially developed for use in machinery used in the food and beverage processing and packaging industry. They are based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid HF 32 drops automatically in larger quantities.

RENISO TRITON SEZ 32

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SEZ 32 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SEZ 32 drops automatically in larger quantities.

Cassida Fluid DC 32

Speciality direct contact fluid for food processing applications in the food manufacturing industry

Cassida Fluid DC 32 main applications:

• Absorber oil for edible oil extraction plant solvent recovery systems.
• Forming oil for the manufacture of both two and three piece cans for food and beverages.
• Heat transfer systems in the food industry with a bulk oil temperature range of approximately -30°C to +280°C where the surface temperature of the heating elements (oil film temperature) should not exceed +320°C.

Cassida Fluid DC 32 is a multipurpose fluid designed for a number of special applications in the food manufacturing industry, including absorber oil for edible oil solvent recovery systems, canforming and closed circuit/pressureless heat transfer systems. Cassida Fluid DC 32 has been specially developed to meet the stringent requirements of the food industry. Cassida DC 32 is based on a careful blend of synthetic fluids chosen for their ability to meet the stringent requirements of the food industry.

Your advantage! Price of Cassida Fluid DC 32 drops automatically in larger quantities.

CASTROL Hyspin ZZ 32

Hydraulic oil for the highest demands

Application CASTROL Hyspin ZZ 32

The Hyspin ZZ range are formulated for applications requiring anti-wear and superior oxidation performance and are particularly suitable for hydraulic systems using vane and piston pumps where elevated operating temperatures are encountered. They are formulated for use in severely stressed systems in which high levels of anti-wear performance and/or ultra fine filtration are required. They have been proven to be resistant to the effects of ‘dieseling’ in highly stressed systems such as plastic injection moulding and fatigue testing equipment where the application leads to rapid breakdown of more conventional products. The range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin ZZ is classified as follows:

• DIN 51502 classification - HLP
• ISO 6743/4 - Hydraulic Oils Type HM

Hyspin ZZ grades meet the requirements (for appropriate viscosity grade) of:

• DIN 51524 Part 2
• Cincinnati Lamb (Milacron) P 68-69-70
• Denison (Parker Hannafin) HF-0
• US Steel 126 & 127
• Eaton (formerly Vickers) I-286-S & M-2950-S
• Bosch Rexroth RE90220

Your advantage! Price of CASTROL Hyspin ZZ 32 drops automatically in larger quantities.

Shell Ondina X 432 previously Ondina 941

Medicinal white Oil

Application Shell Ondina X 432

This type of oil can be used in pharmaceutical, food packaging, cosmetic and other applications like TPE/EPDM, where this high purity is required by legislation or important for the quality of the finished product.

TOTAL CIRKAN C 32

High quality oils for moving parts.

Applications CIRKAN C 32

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:

• moving parts
• swivels
• journals
• chains

Your advantage! Price of TOTAL CIRKAN C 32 drops automatically in larger quantities.

Klübersynth GEM 4-32 N

Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology

Application Klübersynth GEM 4-32 N

Klübersynth GEM 4 N was specially developed for the lubrication of spur, bevel, hypoid and planetary gears that are subject to high loads. Such gears are frequently used in the wind, steel, mining and sugar industries. It is also used for the lubrication of standard worm gears as defined in DIN 3996. Klübersynth GEM 4 N can also be used for the lubrication of plain and rolling bearings, all kinds of toothed couplings, chains, guideways, joints, spindles and pumps, especially in applications where the equipment is exposed to elevated temperatures or pronounced temperature fluctuations.

TOTAL AZOLLA AF 32

Antiwear, ashless hydraulic oils

Applications TOTAL AZOLLA AF 32

• Hydraulic systems operating under high pressure and/or temperature conditions.
• High-pressue vane, piston or gear pumps.
• Sensitive hydraulic circuits requiring absolute filterability of the fluid (very fine servo valve play) : plastic moulding machines.
• Any hydraulic system where the risk of contamination of the environment and waters exists.
• Any application where an antiwear, high-performance oil is necessary : various movements, plain bearings and rolling bearings, reducers under low load, etc. .
• Lubrication of circuits in which the presence of water is accidental : machine tools, farm and food products industries, paper mills, steel making, etc.

Your advantage! Price of TOTAL AZOLLA AF 32 drops automatically in larger quantities.

TOTAL PRESLIA 32

Mineral turbine oils.

Applications TOTAL PRESLIA 32

• PRESLIA oils are specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

Your advantage! Price of TOTAL PRESLIA 32 drops automatically in larger quantities.

Q8 Heinichen 32

Excellent zinc-based hydraulic detergent oil

Applications Q8 Heinichen 32

Q8 Heinichen 32 is perfect for hydraulic systems where water can be a problem or hydraulic systems are subject to potential pollution such as off-highway equipment.

Your advantage! Price of Q8 Heinichen 32 drops automatically in larger quantities.

TOTAL PRESLIA GT 32

High performance long life gas turbine oils for severe applications

Applications TOTAL PRESLIA GT 32

PRESLIA GT oils are:

• specially designed for the lubrication (bearings, gear boxes) and control circuit of steam and gas turbines
• turbines submitted to high thermal stress
• suitable for turbine coupled gears lubrication

Your advantage! Price of TOTAL PRESLIA GT 32 drops automatically in larger quantities.

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.