Shell Helix Ultra 5W40
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Shell Helix Ultra 5W-40
Fully synthetic motor oil - Shell's most advanced formulation for high performance engines
Shell Helix Ultra 5W-40 main applications:
- Shell Helix Ultra 5W40 fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra 5W40 can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
Shell Helix Ultra 5W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals.
Pay attention! Price of Shell Helix Ultra 5W-40 drops automatically in larger quantities.
Specifications, Approvals & Recommendations of Shell Helix Ultra 5W40
Shell Helix Ultra 5W-40 |
Specifications, Approvals & Recommendations |
---|---|
ACEA A3/B3 A4/B4 |
API SN/CF |
Mercedes MB-Approval 229.5, 226.5 | BMW LL-01 |
Volkswagen VW 502.00 en 505.00 | Porsche A 40 |
Renault RN 0700 0710 | Peugeot Citroen Opel PSA B 71 2296 |
Ferrari approved | Chrysler MS-10725 MS-12991 |
Fiat 9.55535.Z2 & Fiat 9.55535-N2 (Meets the requirements)
Shell Helix Ultra 5W-40 benefits:
- + Shell’s ultimate active cleansing technology
- + Superior wear and corrosion protection
- + Active clean-up
- + Superior resistance to oil degradation
- + Low-evaporation formulation
- + Exceptional low-temperature performance
- + Long Life
- + Multi-fuel capability
Performance, Features & Benefits of Shell Helix Ultra 5W-40
+ Shell’s ultimate active cleansing technology
Shell Helix Ultra 5W40 helps to protect high-performance engines from power and performance-robbing deposits.
+ Superior wear and corrosion protection
Helps to extend engine life by protecting surfaces from wear and by helping to neutralise corrosive combustion acids.
+ Active clean-up
Shell Helix Ultra 5W40 helps to remove sludge left behind by inferior oils.
+ Superior resistance to oil degradation
Helps to maintain protection throughout the oil-drain interval.
+ Low-evaporation formulation
Low oil consumption for less frequent top-up with Shell Helix Ultra 5W40.
+ Exceptional low-temperature performance
Faster oil flow with Shell Helix Ultra 5W40 for quicker engine warm-up.
+ Long Life
Exceptional protection and cleansing, even at the longest manufacturer-recommended oil-drain intervals.
+ Multi-fuel capability
Shell Helix Ultra 5W40 can be used for gasoline, diesel and gas engines, and is also suitable for biodiesel and gasoline/ethanol blends.
To find the right Shell Helix product for your vehicles and equipment, please consult Shell LubeMatch at: http://lubematch.shell.com
If you have any questions, please contact OilOnline Technical Helpdesk
Health, Safety & Environment of Shell Helix Ultra 5W-40
Health and Safety
Shell Helix Ultra 5W-40 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/
Protect the Environment
Take used Shell Helix Ultra 5W-40 to an authorised collection point. Do not discharge into drains, soil or water.
Typical Physical Characteristics of Shell Helix Ultra 5W-40
Characteristics | Method | Shell Helix Ultra 5W-40 | ||
Kinematic Viscosity | @100°C | cSt | ASTM D445 | 12.76 |
Kinematic Viscosity | @40°C | cSt | ASTM D445 | 75.66 |
Viscosity Index | - | - | ASTM D2270 | 170 |
Dynamic Viscosity | @-30°C | cP | ASTM D5293 | 6400 |
MRV | @-35°C | cP | ASTM D4684 | 17700 |
Density | @15°C | kg/m³ | ASTM D4052 | 843 |
Flash point | - | °C | ASTM D92 | 235 |
Pour point | - | °C | ASTM D97 | -36 |
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
You may also be interested in
- Q8 Formula Excel 5W-40Starting at: € 4,47 / L
- Castrol Magnatec 5W-40 C3Starting at: € 7,51 / L
- Castrol Magnatec 5W-40 DPFStarting at: € 8,00 / L
- Castrol EDGE FST 5W-40 Turbo DieselStarting at: € 7,18 / L
- Mobil Delvac 1 5W-40Starting at: € 7,78 / L
- Total Quartz 9000 5W-40Starting at: € 5,03 / L
- Total Quartz INEO MC3 5W-40€ 8,13 / L