Shell

Shell Omala S4 GXV 680

Advanced Synthetic Industrial Gear Oil

Application Shell Omala S4 GXV 680

Drive systems and other inaccessible installations. Shell Omala S4 GXV 680 is excellent for installations that require an extra long oil bath life and/or where irregular maintenance occurs due to difficult accessibility of the installation. Excellent compatibility with elastomers, paints and sealants. Compatible with a wide range of seals used in industrial systems, e.g. nitrile rubber and fluoroelastomers. Homologated against the stringent Siemens requirements for Flender gears and geared motors. Industrial gearing with closed sump Recommended for industrial gearing under severe operating conditions such as high peak or shock loading and/or low, high or highly fluctuating oil bath temperatures. Other Applications Shell Omala S4 GXV 680 can be used for the lubrication of bearings and other components in systems with circulation or oil splash lubrication. For the lubrication of heavily loaded worm gears, the use of Shell Omala "W" lubricating oils is recommended. For hypoid transmissions in vehicles, the use of suitable Shell Spirax is recommended.

Shell Gadus S3 V460D 1.5 Previous Name: Retinax SDX & Albida HDX 2

Premium multi-purpose heavy duty grease with solids

Shell Gadus S3 V460D 1.5 main applications:

• Shell Gadus S3 V460D greases are used for the grease lubrication of heavy duty, slow-moving bearings subject to shock loads found in the following industries:
• Mining
• Steel
   

Shell Gadus S3 V460D 1.5 greases are high performance, high temperature greases for slow-moving, heavily loaded large bearings subject to shock loads. They are based on high viscosity index mineral oil and a lithium complex soap thickener. Apart from containing the latest additives to ensure excellent high temperature, anti-corrosion and antioxidation performance, they also contain MoS2 to ensure the grease can handle shock loads.

Please note!! Price of Shell Gadus S3 V460D 1.5 drops automatically in larger quantities.

Shell Naturelle S4 Hydraulic Fluid 46

Environmentally Acceptable, Fully Saturated Synthetic Hydraulic Fluid

Application Shell Naturelle S4 Hydraulic Fluid 46

Mobile / exterior hydraulic applications. Hydraulic and fluid power transmission systems in exposed environments can be subject to variations in temperature. The low pour point and naturally high shear stable viscosity index (VI) of Shell Naturelle S4 Hydraulic Fluid helps deliver responsive performance from cold start to full load, heavy duty operation.

General industrial control equipment and hydraulic systems. The excellent anti-wear properties and high viscosity index (VI) of Shell Naturelle S4 Hydraulic Fluid, mean that it can often be used where ISO 11158 (HM/HV) and DIN 51524 Part 2 or Part 3 (HLP/HVLP) mineral oil hydraulic fluids are specified.

Environmentally sensitive areas. Shell Naturelle S4 Hydraulic Fluid is an ‘environmentally acceptable’ hydraulic fluid (ISO 15380 HEES), with ‘reduced harm for water and soil during use’ (EU Ecolabel). When compared to conventional mineral oil hydraulic fluids, it will have a reduced environmental impact in the event of a leak or accidental spillage. It is particularly suited for use in environmentally sensitive areas.

Shell Gadus S2 OG 80

Superior Performance Open Gear Greases

Application Shell Gadus S2 OG 80

Heavily loaded open gears, particularly those found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications. When choosing a product to suit your ambient temperature conditions, always consult with your Shell representative for the appropriate grade.

Multi service lubricant that can be used as the one grease (multi purpose and open gear) for the entire machine on most shovels, excavators and draglines (excluding electrical motors bearings).

Surface dressing of slow moving gears open to the atmosphere.

Plain bearings, pivot pins/bushings & articulations found in earth moving equipment.

Mooring, static and slow moving wire ropes including those intermittently immersed in salt water

Wide variety of heavy-duty mining and industrial applications.

Shell Gadus S3 T460 1.5 Previous Name: Stamina Grease 0511

Premium Performance High-Temperature Extreme Pressure Grease

Shell Gadus S3 T460 1.5 main applications:

• Shell Gadus S3 T460 Grease was formulated specifically for the lubrication of high temperature, slow-moving concast bearings in the steel industry. 
• It can also be used in other high temperature, slow-moving bearing, applications. 
• Field experiences have demonstrated the benefits of Gadus S3 T460 Grease, achieving lower maintenance costs ie less bearing replacement and less maintenance of centralized lubrication systems.

Shell Gadus S3 V460 Greases are especially suitable for slow moving, heavy-duty bearings operating at high temperature and under severe load. eg Steel (continuous casters, workroll bearings), Cement, Paper, Chemical Industry, Mining.

Please note!! Price of Shell Gadus S3 T460 1.5 drops automatically in larger quantities.

Shell Naturelle S2 Hydraulic Fluid 68 previously Shell Naturelle HF-E 68

Fully synthetic, environmentally friendly biodegradable and low-flammable hydraulic oil

Main uses of Shell Naturelle S2 HF 68 are:

• + Mobile /hydraulic applications outside
• + General industrial control systems and hydraulics
• + Ecologically sensitive areas, with Ecolabel
  
  

Shell Naturelle S2 68 Hydraulic Fluid is an advanced biodegradable and HFDU type less flammable hydraulic fluid for use in hydraulic and power transmission systems. It is readily biodegradable with a low ecotoxicity, particularly suited for use in environmentally sensitive areas and in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundries. Fully synthetic esters, blended with ashless additives, provide Shell Naturelle S2 HF 68 with a superior blend of lubrication performance and environmental acceptability.

Shell Omala S5 Wind 320

Advanced Synthetic Wind Turbine Gear Oil

Shell Omala S5 Wind 320 main applications:

• + Wind turbines main gearboxes
• + Yaw and pitch drive gearboxes

Shell Omala S5 Wind 320 advanced fully synthetic wind turbine gear oil offers exceptional lubrication performance, even under severe operating conditions. The innovative formulation is developed to protect your wind turbine gears and bearings by minimizing wear, protecting against micro-pitting, maintaining effective fluidity at extremes of low temperature and minimizing foam formation.

Pay attention! Price of Shell Omala S5 Wind 320 drops automatically in larger quantities.

Shell Refrigeration Oil S4 FR-F 100

Advanced Synthetic Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S4 FR-F 100

Refrigerator Compressors Shell Refrigeration Oil S4 FR-F is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Refrigerant Compatibility Shell Refrigeration Oil S4 FR-F is recommended for use with R134a and other types of HFC refrigerant.Seal Compability Shell Refrigeration Oil S4 FR-F is compatible with all sealing materials commonly used with HFC refrigerant systems.

Shell Spirax S6 ATF A295

Synthetic Extended Drain Heavy Duty Automatic Transmission Fluid

Shell Spirax S6 ATF A295 main applications:

Allison Medium/Heavy Duty Automatic Transmissions Spirax S6 ATF A295 was developed to meet the extended drain requirements of late model medium and heavy duty Allison automatic transmissions. It is particularly suitable for transmissions requiring a TES-295 type product.

Shell Spirax S6 ATF A295 Oil is a fully synthetic, heavy-duty automatic transmission fluid which is specifically designed and approved for use in transmissions requiring Allison TES-295 fluids. Spirax S6 ATF A295 is approved for extended service intervals and remains stable even under severe operating conditions

Please note!! Price of Shell Spirax S6 ATF A295 drops automatically in larger quantities.

Aeroshell Oil W120

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W120

AeroShell W Oils are available in three different viscosity grades: AeroShell Oil W80 - AeroShell Oil W100 - AeroShell Oil W120. The suffix for each grade corresponds to the viscosity of the oil at 2100 F in Saybolt Universal Seconds. AeroShell W Oils are intended for use in four-stroke (fourcycle) certified reciprocating piston engines, including fuelinjected and turbocharged engines. AeroShell W Oils are not recommended for use in automotive engines. For automotive engines converted for use in aircraft, the specific engine manufacturer or the conversion agency should be consulted for proper oil recommendation. Most radial engine operators use AeroShell Oil W120 in warm weather operations with AeroShell Oil W100 or AeroShell Oil W 15W-50 being used in cooler ambient temperatures. AeroShell Oil W100 or AeroShell Oil W 15W-50 are the common choices for most operators of Lycoming and Continental flat engines but, during colder parts of the year, use of AeroShell Oil W80 in place of AeroShell Oil W100 would be an excellent choice. Although some aircraft engine manufacturers and rebuilders/ overhaul agencies suggest in their service bulletins the use of a straight mineral oil in new or newly overhauled engines, other rebuilders or manufacturers, especially for engines such as the Lycoming O-320H and O/LO360E, allow either ashless dispersant or straight mineral oil for break-in, whereas ashless dispersant oils are mandated for break-in for all turbocharged Lycoming engines. Operators should check with engine manufacturers or rebuilders for the correct recommendation for the specific engine and application.

Shell Gadus S2 OG 85

Superior Performance Open Gear Greases

Application Shell Gadus S2 OG 85

Heavily loaded open gears, particularly those found in grinding mills, kilns, shovels, draglines, ship loaders, stackers and reclaimers and excavator applications. When choosing a product to suit your ambient temperature conditions, always consult with your Shell representative for the appropriate grade.

Multi service lubricant that can be used as the one grease (multi purpose and open gear) for the entire machine on most shovels, excavators and draglines (excluding electrical motors bearings).

Surface dressing of slow moving gears open to the atmosphere.

Plain bearings, pivot pins/bushings & articulations found in earth moving equipment.

Mooring, static and slow moving wire ropes including those intermittently immersed in salt water

Wide variety of heavy-duty mining and industrial applications.

AeroShell Calibrating Fluid 2

AeroShell Calibrating Fluid 2 is composed of Specially Run Stoddard Solvent and is used for calibrating aircraft fuel system components

Application AeroShell Calibrating Fluid 2

AeroShell Calibrating Fluid 2 is intended for the calibration of fuel system components of aircraft turbine engines

Shell Gas compressor oil S4 PV 190 previously Shell Madrela GP

Synthetic special oil for gas compressors

Application Shell Gas compressor oil S4 PV 190

Gas compressors. The lubrication system of closed compressors that compress hydrocarbons and other synthetic gases, and the crankcase and bearings operate in the gas atmosphere.

Labyrinth piston compressor. Labyrinth piston compressors, which do not require cylinder lubrication. Shell Gas Compressor Oil S4 PV is required for pressure lubrication of the plain bearings (in a closed crankcase).

A wide range of gas compressor applications. Shell Gas Compressor Oil S4 PV is suitable for compressors that compress the following gases: Methane; butene; ethane; butadiene; ethylene; vinyl chloride; propane; propylene; ammonia; inert gases (dried); butane.

Shell Gadus S5 V220 2

Advanced Multipurpose Extreme Pressure Grease

Shell Gadus S5 V220 2 main applications:

• Shell Gadus S5 V220 is used for the grease lubrication of bearings in both transport and industrial applications, including also both the wet and dry ends of paper machines.

Shell Gadus S5 V220 is an advanced performance grease for general transport and industrial applications. It is based on high viscosity index synthetic base oil and a lithium complex soap thickener. It contains additives against wear, oxidation and corrosion.

Please note!! Price of Shell Gadus S5 V220 2 drops automatically in larger quantities.

Shell Transmission MA 75W-90

Shell Transmission MA is a fully synthetic gearbox oil designed to fulfil the latest Mercedes Benz heavy duty transmission requirements. 

Applications

Heavy duty gearboxes fitted with synchromesh, in particular for those working under very severe load and operation conditions and therefore where the oil temperature is usually high.

This product is particularly designed to meet the latest Mercedes Benz heavy duty transmission requirements and can be used where this manufacturer recommend an approved lubricant according to the Sheet 235.11.

Transmission MA can also be recommended for passenger car gearboxes including Transaxle design.

Approvals

API Service Classification GL-4
Mercedes Benz Sheet 235.11

GadusRail S4 High Speed EUFR Previous Name: Nerita Grease 2858

Advanced Railroad Axle Box Grease

GadusRail S4 High Speed EUFR main applications:

• Rail High speed European axle box applications where extended service intervals are required to reduce maintenance costs.
   

Please note!! Price of GadusRail S4 High Speed EUFR drops automatically in larger quantities.

Shell Naturelle S4 Stern Tube Fluid 100

Special Purpose Biodegradable Synthetic Stern Tube Fluid

Shell Naturelle S4 Stern Tube Fluid 100 main applications:

Shell Naturelle S4 Stern Tube Fluid 100 is designed for the lubrication and corrosion protection of stern tube bearings.

• + Vessel stern tubes

Shell Naturelle S4 Stern Tube Fluid is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid is designed to offer superior lubrication performance whilst also being readily biodegradable with low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid is an Environmentally Acceptable Lubricant (EAL) according to the definitions of the US EPA 2013 Vessel General Permit (VGP)

Pay attention! Price of Shell Naturelle S4 Stern Tube Fluid 100 drops automatically in larger quantities.

Shell Omala S2 GX 220 (previously Omala 220, S2 G 220 or F 220)

Industrial gearbox oils ISO VG 220

Shell Omala S2 GX 220 is a high-quality extreme-pressure (EP) gearbox oil primarily designed for heavily loaded industrial gears. The excellent protection against high loads, the excellent protection against micro-pitting and compatibility with elastomers and paint offer superior performance in gears with closed sump.

Main uses of Shell Omala S2 GX 220 are:

• + Industrial gearboxes with closed sump
• + Heavily loaded systems with oil lubrication and circulation systems
• + Non-gear related applications (roller bearings and other (steel on steel) parts with splash or forced circulation systems).
  

Shell Naturelle S4 Gear Fluid 68

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Application Shell Naturelle S4 Gear Fluid 68

Marine propulsion drives, thrusters and controllable pitch propellers. Industrial gears, bearings and other components in circulated and splash lubricated systems

Shell Naturelle S4 Gear Fluid 150

Special Purpose Biodegradable Synthetic Gear and Bearing Fluid

Application Shell Naturelle S4 Gear Fluid 150

Marine propulsion drives, thrusters and controllable pitch propellers. Industrial gears, bearings and other components in circulated and splash lubricated systems