Shell

Shell Advance 4T Ultra 10W-40

100% Synthetic 4 Stroke Motorcycle engine oil

Shell Advance 4T Ultra 10W-40 main applications:

• High-performance air and water-cooled four-stroke motorcycle engines, 
• Race-tuned 
• Those ones with integral gearboxes and wet clutches.
   

Shell Advance 4T Ultra 10W40 with PurePlus Technology, is our top-tier 4 stroke motorcycle engine oil. Shell patented PurePlus Technology converts pure natural gas into clear base oil with virtually none of the impurities of crude oil in the starting point for most conventional and synthetic motorcycle oils.
The 100% synthetic Shell Advance 4T Ultra 10W40 is made from this pure and clear base oil, combined with a motorcycle-specific additive pack with unique Active Cleansing Technology. It helps to cleanse and keep the engine cleaner.
A clean motorcycle engine helps provide better engine efficiency, performance and protection. Shell Advance 4T Ultra 10W40 has been race proven and endorsed by leading motorcycle manufacturers. The product exceeds the requirements of all motorcycle manufacturers. 

Please note!! Price of Shell Advance 4T Ultra 10W-40 drops automatically in larger quantities.

Shell Helix HX7 10W-40

Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 10W-40 main applications:

• Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven by demanding traffic conditions.

Please note!! Price of Shell Helix HX7 10W-40 drops automatically in larger quantities.

Aeroshell Oil 100

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 100

AeroShell Oils are available in four different viscosity grades: · AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210° F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Shell Helix Ultra 5W-40

Fully synthetic motor oil - Shell's most advanced formulation for high performance engines

Shell Helix Ultra 5W-40 main applications:

• Shell Helix Ultra 5W40 fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra 5W40 can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 5W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals.

Pay attention! Price of Shell Helix Ultra 5W-40 drops automatically in larger quantities.

Shell Rimula R6 LM 10W-40

Fully Synthetic Heavy Duty Diesel Engine Oil 10W40

Shell Rimula R6 LM 10W-40 main applications:

• On-highway heavy duty applications
• Low emission engine use
• CNG engine oil performance

Shell Rimula R6 LM 10W40 oil features “Low-SAPS” additive technology and unique anti-wear system. Protective power is enhanced with synthetic technology, resulting in maintenance saving long drain capability, exceptional wear and cleanliness performance.

Pay attention! Price of Shell Rimula R6 LM 10W-40 drops automatically in larger quantities.

Shell Mysella S5 N 40 Previous Name: Mysella XL

Long Life, Low Ash Stationary Gas Engine Oil

Shell Mysella S5 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N40 is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a 'low ash' oil. Shell Mysella S5 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology. Shell Mysella S5 N 40 is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Please note!! Price of Shell Mysella S5 N 40 drops automatically in larger quantities.

Shell Rimula R6 MS 10W-40 (E7/LDF-3)

Synthetic Heavy Duty Diesel Engine Oil

Shell Rimula R6 MS 10W-40 (E7/LDF-3) main applications:

• On-highway Heavy Duty Applications
• Low Emission Engine Use

Shell Rimula R6 MS 10W40 features advanced multi-functional additive technology in fully synthetic base oil systems to deliver highly responsive protection that continuously adapts to your driving conditions. Protection is further enhanced though formulation synergies that enhance the activity of the oil resulting in maintenance saving long drain performance coupled with excellent protection against soot induced wear, piston and engine deposits and fuel economy capability. Shell Rimula R6 MS 10W40 is suitable for most Euro IV and Euro V engines without Diesel Particle Filter as well as Euro VI engines of Scania.

Please note!! Price of Shell Rimula R6 MS 10W-40 (E7/LDF-3) drops automatically in larger quantities.

Shell Rimula R3+ 40 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 40 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 40 drops automatically in larger quantities.

Shell Rimula R5 LE 10W-40

Synthetic Technology Heavy Duty Diesel Engine Oil

Shell Rimula R5 LE 10W-40 main applications:

• European heavy duty engines
  Shell Rimula R5 LE 10W-40 provides protection and performance in modern high power heavy-duty diesel engines from leading European engine makers such as Mercedes-Benz and MAN and where oils meeting ACEA E9 are called for.
• Low emission engine use
  Shell Rimula R5 LE 10W40 meets the requirements of the major European and North American engine manufacturers for low emission applications.

Shell Rimula R5 LE 10W40 oils feature ""Low-SAPS"" additive technology while delivering energy savings. Protective power is enhanced through the use of synthetic base oil technology to deliver fuel economy performance with no compromise in durability.

Please note!! Price of Shell Rimula R5 LE 10W-40 drops automatically in larger quantities.

Shell Rimula R5 E 10W-40

Synthetic Technology Heavy Duty Diesel Engine Oil

Shell Rimula R5 E 10W-40 main applications:

• Severe service heavy duty diesel engines
• High technology low emission engines

For the latest low emissions engines, especially those fitted with exhaust diesel particulate traps (DPF), we recommend the use of our low-emissions products, Shell Rimula R6 LM/LME.

Shell Rimula R5 E oils protect under full range of pressures and temperatures. Enhanced with synthetic technology to deliver energy saving, excellent soot and viscosity control, outstanding protection against wear and exceptional versatility.

Please note!! Price of Shell Rimula R5 E 10W-40 drops automatically in larger quantities.

Shell Gadinia S3 40 Replacement For: Shell Gadinia 40

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia S3 40 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 40 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 40 viscosity oils.

The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Shell Rimula R6 M 10W-40

Fully synthetic 'Heavy Duty' Low SAPS Diesel engine oil

Benefits of Shell Rimula R6 M 10W-40 are:

• + Savings on maintenance
• + Lower maintenance costs (very long oil change intervals)
• + Low wear - long engine life

Shell Rimula R6 M 10W-40 full synthetic oil provides continuous protection resulting in extended oil change intervals, protection against wear caused by soot and deposits on the pistons and engine, and fuel saving. Shell Rimula R6 M 10W-40 is suitable for most Euro 4 and Euro 5 engines without a particulate filter.

Note ! Price Shell Rimula R6 M 10W-40 drops automatically with larger quantities.

Shell Helix HX7 5W-40 Previous Name:

Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 5W-40 main applications:

• Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven by demanding traffic conditions.

Please note!! Price of Shell Helix HX7 5W-40 drops automatically in larger quantities.

Shell Helix Ultra ECT 5W-30 C3

Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems

Shell Helix Ultra ECT 5W-30 C3 main applications:

• Shell Helix Ultra ECT 5W30 C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines.
• Shell Helix Ultra ECT 5W30 C3’s fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean.
• Protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Specifications BMW LL-04; MB approval 229.51; VW 504.00/507.00; Porsche C30
   

Shell Helix Ultra ECT 5W30 C3 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy.

Pay attention! Price of Shell Helix Ultra ECT5W-30 C3 drops automatically in larger quantities.

Shell Spirax S4 TX Previous Name: Shell Harvella TX 10W-40

Premium Performance, SAE 10W-40, Universal Tractor Oil

Spirax S4 TX main applications:

• Universal performance - suitable for many types of tractor transmission/hydraulic systems
• Oil immersed brakes
• Powershift transmissions
• Hydraulics
• Power steering systems
• Hydrostatic transmissions
• Conventional gear drive systems

Shell Spirax S4 TX Oil is 'Super Tractor Oil Universal' (STOU) oil based on Shell’s XHVI base oil technology and an advanced additive package. Spirax S4 TX gives superior performance in engine, transmission and hydraulic applications for a wide range of agricultural equipment and applications.

Please note!! Price of Spirax S4 TX drops automatically in larger quantities.

Shell Rotella DD+ 40

Two-stroke heavy duty Diesel Engine Oil

Shell Rotella DD+ 40 main applications:

• Detroit Diesel two-stroke engines
• Certain 4-cycle engines
   

Shell Rotella DD+ Oil 40 is a high performance, heavy-duty engine oil designed specifically for all two-stroke diesel engines manufactured by Detroit Diesel Corporation.

Pay attention! Price of Shell Rotella DD+ 40 drops automatically in larger quantities.

Previously: Shell Donax TCS 10W-40

High performance synthetic oil for transmissions of earthmoving and agricultural machinery.

Shell Spirax S6 CXME 10W-40 is designed to provide operators with carefree operation and maximum reliability over the life of their equipment. Spirax S6 CXME 10W-40 meets the high demands of Modern Transmissions, Differential, End Drives, Wet Brakes and hydraulic systems of heavy-duty off-highway materials (earthmoving, road construction, construction, mining, quarries ....).

Applications

Shell Spirax S6 CXME 10W-40 is recommended for use in heavy-duty off-road machines from leading manufacturers including, but not limited to, Caterpillar and Komatsu, and transmissions produced by Eaton, ZF, & nbsp;& middot; Dana, Rockwell among others:

• Powershift Transfers and Intermediate Differences
• End drives, differentiators and reducers
• Wet Braking
• Hydraulic systems and hydrostatic transmissions

Aeroshell Oil 80

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 80

AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations

Aeroshell Oil Sport Plus 4

Synthetic lubricating oil for aircraft piston engines (4-stroke)

Application Aeroshell Oil Sport Plus 4

AeroShell Oil Sport Plus 4 is intended for use in four-stroke (four-cycle) aircraft piston engines that are of an original automotive design and which cannot, therefore, use traditional Ashless Dispersant aircraft engine oil types. These engines include carburetted, fuel-injected and turbocharged types such as the ROTAX® 912 & 914 series. AeroShell Sport Plus 4 may be used in integrated gearbox and wet clutch systems. AeroShell Oil Sport Plus 4 can be used in engines which operate on both unleaded gasoline and Avgas 100LL. The correct choice of additives and good solvent properties allow the oil to handle lead by-products that can form a semi solid sludge in the oil which can restrict oil passages and compromise lubrication. AeroShell Oil Sport Plus 4 is superior in this respect to those oil types intended for automotive/motorcycle application. Please refer to Operators Handbook/Manual for the correct oil drain interval when operating on different fuels.

Aeroshell Oil Diesel Ultra

Synthetic lubricating oil for aircraft diesel engines

Application Aeroshell Oil Diesel Ultra

AeroShell Oil Diesel Ultra has been developed to be suitable for use in engines burning Jet fuel and its performance has been optimised to cope with the demands of this unique type of engine/fuel combination. AeroShell Oil Diesel Ultra MUST NOT be used in spark ignition or Avgas powered aircraft engines.