Shell

Shell Helix HX5 15W-40

Premium multi-grade motor oil - Helps to remove sludge from dirty engines

Shell Helix HX5 15W-40 main applications:

• Shell Helix HX5's premium multigrade formulation helps to provide protection in everyday daily driving conditions. Shell Helix HX5 can be used for gasoline, diesel and gas engines, and it is also suitable for biodiesel and gasoline/ethanol blends.
   

Shell Helix HX5 15W40 is designed to help provide consistent engine performance. It works hard to help protect against engine sludge and reduce wear. It is suitable for a wide variety of vehicles for everyday driving conditions.

Please note!! Price of Shell Helix HX5 15W-40 drops automatically in larger quantities.

'Heavy Duty' Diesel 15W40 motor oil

Shell Rimula R4 L 15W40 contains "Low-SAPS" additives technology and offers low emission engines protection under the most severe conditions.

Main uses of Shell Rimula R4L 15W-40 are:

• Off-highway applications,
  Suitable for use in the agricultural and construction sector.
   
• Heavy duty 'Heavy Duty' diesel engines
  Rimula R4L 15W40 saves maintenance costs through longer service life of soot filters and catalysts.

See all Rimula R4 L 15W-40 approvals at the bottom of this page.

Shell Rimula R4 X 15W-40 previous Shell Rimula R3 X 15W-40

Heavy Duty Diesel 15W40 Engine Oil

Shell Rimula R4 X 15W-40 main applications:

• Severe duty heavy duty diesel engines
  Shell Rimula R4 X 15W40 provides demonstrated protection and performance in the latest high power heavy-duty diesel engines from European, US and Japanese manufacturers in both on-highway and off-highway applications.
   
• High Technology Low Emission Engines
  Shell Rimula R4 X 15W40 is suitable for most modern low emission engines meeting Euro 5, 4, 3, 2, and US 2002 emission requirements. 

Shell Rimula R4 X 15W40 is designed to provide Triple Protection to improve engine and oil durability. It helps to lower maintenance and increase the reliability of vehicles. Shell Rimula R4 X 15W40 is suitable for most heavy-duty diesel engines for on off-highway applications.

Please note! Shell Rimula R4 X 15W-40 price drops automatically in larger quantities.

Aeroshell Oil 100

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 100

AeroShell Oils are available in four different viscosity grades: · AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210° F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Shell Helix Ultra 5W-40

Fully synthetic motor oil - Shell's most advanced formulation for high performance engines

Shell Helix Ultra 5W-40 main applications:

• Shell Helix Ultra 5W40 fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra 5W40 can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 5W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals.

Pay attention! Price of Shell Helix Ultra 5W-40 drops automatically in larger quantities.

Shell Mysella S5 N 40 Previous Name: Mysella XL

Long Life, Low Ash Stationary Gas Engine Oil

Shell Mysella S5 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N40 is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a 'low ash' oil. Shell Mysella S5 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology. Shell Mysella S5 N 40 is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Please note!! Price of Shell Mysella S5 N 40 drops automatically in larger quantities.

Shell Omala S2 GX 460 Previous Name: Omala S2 G 460 & Omala F 460

Industrial Gear Oils

Shell Omala S2 GX 460 main applications:

• Enclosed industrial gear systems Shell Omala S2 GX 460 technology provides an effective extreme pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel-on-steel, spur, helical, or planetary gear drives, including highly loaded systems with splash or forced circulation systems. Shell Omala S2 GX 460 oils are also suitable for the lubrication of non-geared applications, that include bearings and other steel-on-steel components with splash or forced circulation systems.
• Other applications Shell offers a wide range of products for other gear applications that have their own specific requirements.
  
  

Shell Omala S2 GX 460 oils are high quality extreme-pressure (EP) oils designed primarily for the lubrication of heavy duty industrial gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints, combine to offer excellent performance in enclosed gear applications.

Please note!! Price of Shell Omala S2 GX 460 drops automatically in larger quantities.

Shell Rimula R3+ 40 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 40 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 40 drops automatically in larger quantities.

Aeroshell Oil W80

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W80

AeroShell Oil W80 - AeroShell Oil W100 - AeroShell Oil W120. The suffix for each grade corresponds to the viscosity of the oil at 2100 F in Saybolt Universal Seconds. AeroShell W Oils are intended for use in four-stroke cycle (four-cycle) certified reciprocating piston engines, including fuel-injected and turbocharged engines. AeroShell W Oils are not recommended for use in automotive engines. For automotive engines converted for use in aircraft, the specific engine manufacturer or the conversion agency should be consulted for proper oil recommendation. Most radial engine operators use AeroShell Oil W120 in warm weather operations with AeroShell Oil W100 or AeroShell Oil W 15W-50 being used in cooler ambient temperatures. AeroShell Oil W100 or AeroShell Oil W 15W-50 are the common choices for most operators of Lycoming and Continental flat engines but, during colder parts of the year, use of AeroShell Oil W80 in place of AeroShell Oil W100 would be an excellent choice. Although some aircraft engine manufacturers and rebuilders/ overhaul agencies suggest in their service bulletins the use of a straight mineral oil in new or newly overhauled engines, other rebuilders or manufacturers, especially for engines such as the Lycoming O-320H and O/LO360E, allow either ashless dispersant or straight mineral oil for break-in, whereas ashless dispersant oils are mandated for break-in for all turbocharged Lycoming engines. Operators should check with engine manufacturers or rebuilders for the correct recommendation for the specific engine and application.

Aeroshell Oil W80 Plus

Mineral ashless dispersant oil for aircraft piston engines

Application Aeroshell Oil W80 Plus

The advanced additives in AeroShell Oil W80 Plus provide better rust and wear protection than conventional single grades. The additives work as a protective barrier to prevent critical parts from being slowly degraded by rust or wear, especially when an aircraft sits idle. This protection helps keep the camshaft and lifters coated, reducing the likelihood of p

Shell Gadinia S3 40 Replacement For: Shell Gadinia 40

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia S3 40 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 40 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 40 viscosity oils.

The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Shell Helix HX7 5W-40 Previous Name:

Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 5W-40 main applications:

• Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven by demanding traffic conditions.

Please note!! Price of Shell Helix HX7 5W-40 drops automatically in larger quantities.

Shell Spirax S6 AXME 75W-90 Previous Name: Spirax ASX 75W-90

Superior performance, synthetic, fuel efficient GL-5 axle oil for many premium applications

Shell Spirax S6 AXME 75W-90 main applications:

• Transmissions and axles
• Heavily loaded axles and non-synchronised transmissions where mineral or synthetic GL-5/MT-1 gear oils are recommended.
  
  

Shell Spirax S6 AXME 75W-90 is a unique fuel-efficient, long life transmission and axle oil, designed to provide ultimate protection to the latest heavy duty manual transmissions and axles. Specially formulated with synthetic base oils and additive technology unique for Shell, gives improved lubrication of the drive train, lowers the operating temperature and helps promote longer life for the equipment. Shell Spirax S6 AXME 75W-90 is also extended oil drain capable and is approved by several OEMs for their extended drain specifications.

Please note!! Price of Shell Spirax S6 AXME 75W-90 drops automatically in larger quantities.

Spirax S3 T Previous Name: Shell Harvella T 15W-40

Premium Performance, SAE 15W-40, Universal Tractor Oil

Spirax S3 T main applications:

• Universal performance
• Oil immersed brakes
• Powershift Transmissions
• Hydraulics
• Power Steering Systems
• Hydrostatic Transmissions
• Conventional Gear Drive Systems

Shell Spirax S3 T Oil is 'Super Tractor Oil Universal' (STOU) oil designed for use in a wide variety of modern agricultural equipment. They are a blend of high viscosity index base oils and an advanced additive package designed to give reliable performance in a wide range of farming applications.

Please note!! Price of Spirax S3 T drops automatically in larger quantities.

Shell Helix Ultra ECT 5W-30 C3

Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems

Shell Helix Ultra ECT 5W-30 C3 main applications:

• Shell Helix Ultra ECT 5W30 C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines.
• Shell Helix Ultra ECT 5W30 C3’s fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean.
• Protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Specifications BMW LL-04; MB approval 229.51; VW 504.00/507.00; Porsche C30
   

Shell Helix Ultra ECT 5W30 C3 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy.

Pay attention! Price of Shell Helix Ultra ECT5W-30 C3 drops automatically in larger quantities.

Shell Gadus S2 V220 1 Previous Name: Alvania Grease EP(LF) 1

High Performance Multipurpose Extreme Pressure Grease

Shell Gadus S2 V220 1 main applications:

• Heavy duty bearings served by centralised dispensing equipment.
• Extreme-pressure gear grease for applications at normal ambient temperature
• Heavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environments.
• Low temperature greasing applications

Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystearate soap thickener and contain extreme-pressure and other proven additives to enhance their performance in a wide range of applications. Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport sectors.

Please note!! Price of Shell Gadus S2 V220 1 drops automatically in larger quantities.

Shell Rotella DD+ 40

Two-stroke heavy duty Diesel Engine Oil

Shell Rotella DD+ 40 main applications:

• Detroit Diesel two-stroke engines
• Certain 4-cycle engines
   

Shell Rotella DD+ Oil 40 is a high performance, heavy-duty engine oil designed specifically for all two-stroke diesel engines manufactured by Detroit Diesel Corporation.

Pay attention! Price of Shell Rotella DD+ 40 drops automatically in larger quantities.

Shell Spirax S2 A 85W-140 Previous Name: Shell Spirax A 85W-140

High quality, GL-5 axle oil

Shell Spirax S2 A 85W-140 main applications:

• Automotive transmissions, differentials
• Moderate to heavily loaded gear sets in stationary and ancillary equipment
• Hypoid gear axles
• Motorcycle gear units separate from the engine

Shell Spirax S2 A 85W-140 is blended for use in a wide variety of automotive axle units subjected to heavy-duty conditions.

Please note!! Price of Shell Spirax S2 A 85W-140 drops automatically in larger quantities.

Shell Sirius S4 15W-40 (previous Sirius 15W40)

High Performance High speed diesel engine oil

Shell Sirius S4 15W-40 main applications:

• High speed propulsion engines
  For example coastal vessels, fishing trawlers, rescue boats and lifeboats.
• High speed engined generators.
  
  

Shell Sirius S4 15W-40 is a high performance diesel engine lubricant for modern high speed engines burning distillate fuels

Aeroshell Oil 80

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 80

AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations