Shell

Shell Coolant Longlife Ready to Use

Organic Additive Technology Pre-diluted Coolant / Antifreeze

Shell Coolant Extra Ready to Use

Pre-diluted Hybrid Organic Additive Technology Coolant / Antifreeze

Aeroshell Oil 100

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 100

AeroShell Oils are available in four different viscosity grades: · AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210° F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Shell Helix Ultra 5W-40

Fully synthetic motor oil - Shell's most advanced formulation for high performance engines

Shell Helix Ultra 5W-40 main applications:

• Shell Helix Ultra 5W40 fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra 5W40 can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 5W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals.

Pay attention! Price of Shell Helix Ultra 5W-40 drops automatically in larger quantities.

Shell Mysella S5 N 40 Previous Name: Mysella XL

Long Life, Low Ash Stationary Gas Engine Oil

Shell Mysella S5 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N40 is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a 'low ash' oil. Shell Mysella S5 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology. Shell Mysella S5 N 40 is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Please note!! Price of Shell Mysella S5 N 40 drops automatically in larger quantities.

Shell Rimula R3+ 40 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 40 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 40 drops automatically in larger quantities.

Shell Gadinia S3 40 Replacement For: Shell Gadinia 40

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia S3 40 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 40 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 40 viscosity oils.

The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Shell Helix HX7 5W-40 Previous Name:

Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 5W-40 main applications:

• Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven by demanding traffic conditions.

Please note!! Price of Shell Helix HX7 5W-40 drops automatically in larger quantities.

Shell Air Tool Oil S2 A 100

Pneumatic Tool and Rock Drill Oils

Application Shell Air Tool Oil S2 A 100

Percussive pneumatic tools Suitable for a wide range of mobile percussive pneumatic tools such as those used in rock drilling, mining and construction activities (e.g. jack hammers, sinkers and other air operated tools). Oil mist lubrication applications Shell Air Tool Oil can also be used in applications requiring mist lubrication, such as air tool installations commonly found in manufacturing. Other applications May be used in certain gear and bearing lubrication systems subject to water ingress.

Shell Spirax S6 ATF 134ME

Automatic transmission fluid for Mercedes-Benz passenger car automatic transmissions

Application Shell Spirax S6 ATF 134ME

Shell Spirax S6 ATF 134ME has been developed as an initial-fill and service-fill fluid for the latest generation of fuel economy optimized 7-speed automatic transmissions (NAG2FE+) used in Mercedes-Benz passenger cars. Shell Spirax S6 ATF 134ME is mandatory for all NAG2FE+transmissions. Shell Spirax S6 ATF 134ME must not be used in older Mercedes-Benz 5- and 7-speed automatic transmissions that require ATFs with MB-approvals 236.10, 236.12 or 236.14.

Shell Helix Ultra ECT 5W-30 C3

Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems

Shell Helix Ultra ECT 5W-30 C3 main applications:

• Shell Helix Ultra ECT 5W30 C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines.
• Shell Helix Ultra ECT 5W30 C3’s fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean.
• Protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Specifications BMW LL-04; MB approval 229.51; VW 504.00/507.00; Porsche C30
   

Shell Helix Ultra ECT 5W30 C3 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy.

Pay attention! Price of Shell Helix Ultra ECT5W-30 C3 drops automatically in larger quantities.

Shell Rotella DD+ 40

Two-stroke heavy duty Diesel Engine Oil

Shell Rotella DD+ 40 main applications:

• Detroit Diesel two-stroke engines
• Certain 4-cycle engines
   

Shell Rotella DD+ Oil 40 is a high performance, heavy-duty engine oil designed specifically for all two-stroke diesel engines manufactured by Detroit Diesel Corporation.

Pay attention! Price of Shell Rotella DD+ 40 drops automatically in larger quantities.

Shell Spirax S5 ATF X

Premium, Synthetic Technology Multi-Vehicle Automatic Transmission Fluid

Application Shell Spirax S5 ATF X

Passenger car automatic transmissions. Heavy duty automatic transmissions. Power steering units.  Hydraulic systems requiring this grade of fluid. 1) Shell Spirax S5 ATF X should not be used where Type F fluids are recommended; check application manual if the vehicle is one of the following: Datsun/Nissan pre 1971, Lincoln pre 1978, Ford/Mercury pre 1981, Toyota pre 1983, Volvo pre 1985, Mazda pre 1986, Saab pre 1993. 2) Shell Spirax S5 ATF X should not be used in Continuous Variable Transmissions (CVTs) or Double Clutch Transmissions (DCTs). 3) Shell Spirax S5 ATF X does not meet the low viscosity requirements of 2006 and later GM vehicles requiring DEXRON® - VI, Ford applications requiring Ford MERCON® LV or Mercon® SP, Shell 1375.4, Toyota WS, Hyundai SP-IV or SPH-IVRR, Nissan Matic-S, Honda ATF DW-1, Chrysler ZF 9 speed ATF, other ZF 9-speed ATFs (in a number of European cars), newer Daimler transmissions (ATF 134 or later MB Approval 236.12, 236.14, 236.15 or 236.16) and other specialty transmissions where a low viscosity ATF is recommended. Where applications allow use of an alternate fluid of a higher viscosity (example Nissan Matic-J when Nissan Matic-S is not available) to one of the above fluid specifications, Pennzoil PlatinumTM High Mileage & Import MV ATF is an excellent recommendation. DEXRON is a registered trademark of General Motors Corporation. MERCON is a registered trademark of Ford Motor Company.

Shell GadusRail S4 WFB 000

High Performance Biodegradable Railway Wheel Flange Grease

Application Shell GadusRail S4 WFB 000

On board lubrication of trams and railways, for electrically or air pressure operated lubricators. Nozzle selection according OEM recommendation. Volume range of 10 - 40 m

Aeroshell Oil 80

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 80

AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations

Shell Refrigeration Oil S4 FR-V 32

Synthetic chiller oil

Application Shell Refrigeration Oil S4 FR-V 32

Suitability for a wide range of refrigeration compressors Shell Refrigeration Oil S4 FR-V is recommended for the lubrication of open, semi-hermetic and hermetic refrigeration compressors for small, commercial and industrial refrigeration systems, it can be used in both rotary and rotary refrigeration systems can also be used in piston compressors. Due to its dissolving power and miscibility with mineral oil, it is suitable as a flushing liquid in turbines. circuits. For more information please get in touch with your Shell contact

Shell Spirax S6 ATF A668

Synthetic Extended Drain Heavy Duty Automatic Transmission Fluid

Application Shell Spirax S6 ATF A668

Allison Medium/Heavy Duty Automatic Transmissions Spirax S6 ATF A668 was developed to meet the extended drain requirements of late model medium and heavy duty Allison automatic transmissions. It is particularly suitable for transmissions requiring a TES-668 type product and it is backwards compatible with TES-295 approved fluids. · Municipal fleets· Vans, school buses · Buses and Coaches · Emergency vehicles · Commercial vehicles and trucks · Motor- homes · Heavy duty pickup trucks Spirax S6 ATF A668 can also be used in some Voith heavy duty transmissions as well as those previously serviceable by Dexron® III and Mercon® fluids, and is particularly suited to mixed fleet operations.

Aeroshell Oil Sport Plus 4

Synthetic lubricating oil for aircraft piston engines (4-stroke)

Application Aeroshell Oil Sport Plus 4

AeroShell Oil Sport Plus 4 is intended for use in four-stroke (four-cycle) aircraft piston engines that are of an original automotive design and which cannot, therefore, use traditional Ashless Dispersant aircraft engine oil types. These engines include carburetted, fuel-injected and turbocharged types such as the ROTAX® 912 & 914 series. AeroShell Sport Plus 4 may be used in integrated gearbox and wet clutch systems. AeroShell Oil Sport Plus 4 can be used in engines which operate on both unleaded gasoline and Avgas 100LL. The correct choice of additives and good solvent properties allow the oil to handle lead by-products that can form a semi solid sludge in the oil which can restrict oil passages and compromise lubrication. AeroShell Oil Sport Plus 4 is superior in this respect to those oil types intended for automotive/motorcycle application. Please refer to Operators Handbook/Manual for the correct oil drain interval when operating on different fuels.

Aeroshell Oil Diesel Ultra

Synthetic lubricating oil for aircraft diesel engines

Application Aeroshell Oil Diesel Ultra

AeroShell Oil Diesel Ultra has been developed to be suitable for use in engines burning Jet fuel and its performance has been optimised to cope with the demands of this unique type of engine/fuel combination. AeroShell Oil Diesel Ultra MUST NOT be used in spark ignition or Avgas powered aircraft engines.

Shell Refrigeration Oil S4 FR-F 32

Advanced Synthetic Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S4 FR-F 32

Refrigerator Compressors Shell Refrigeration Oil S4 FR-F is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Refrigerant Compatibility Shell Refrigeration Oil S4 FR-F is recommended for use with R134a and other types of HFC refrigerant.Seal Compability Shell Refrigeration Oil S4 FR-F is compatible with all sealing materials commonly used with HFC refrigerant systems.