Shell

Shell Advance 4T Ultra 15W-50

100% Synthetic 4 Stroke Motorcycle engine oil endorsed by Ducati

Shell Advance 4T Ultra 15W-50 benefits::

• + Reduces engine noise & vibration
• + More efficient power delivery & enhanced responsiveness
• + Protects & prolongs engine life

Shell Advance 4T Ultra 15W50 with PurePlus Technology, is our top-tier 4 stroke motorcycle engine oil. Shell patented PurePlus Technology converts pure natural gas into clear base oil with virtually none of the impurities of crude oil in the starting point for most conventional and synthetic motorcycle oils. The 100% synthetic Shell Advance 4T Ultra 15W50 is made from this pure and clear base oil, combined with a motorcycle-specific additive pack with unique Active Cleansing Technology. It helps to cleanse and keep the engine cleaner. A clean motorcycle engine helps provide better engine efficiency, performance and protection. Shell Advance 4T Ultra 15W50 has been race proven and endorsed by leading motorcycle manufacturers. The product exceeds the requirements of all motorcycle manufacturers.

Please note!! Price of Shell Advance 4T Ultra 15W-50 drops automatically in larger quantities.

Aeroshell Oil 100

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 100

AeroShell Oils are available in four different viscosity grades: · AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210° F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.

Shell Helix Ultra 5W-40

Fully synthetic motor oil - Shell's most advanced formulation for high performance engines

Shell Helix Ultra 5W-40 main applications:

• Shell Helix Ultra 5W40 fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra 5W40 can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 5W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It is suitable for even the longest OEM-recommended drain intervals.

Pay attention! Price of Shell Helix Ultra 5W-40 drops automatically in larger quantities.

Shell Mysella S5 N 40 Previous Name: Mysella XL

Long Life, Low Ash Stationary Gas Engine Oil

Shell Mysella S5 N 40 main applications:

• Spark-ignited gas engines fuelled by natural gas, especially those creating high oil stress
• May also be used for landfill and biogases
  
  

Shell Mysella S5 N40 is a high performance quality oil blended for use in highly-rated, 4-stroke, spark-ignition engines which require a 'low ash' oil. Shell Mysella S5 N 40 satisfies the new generation of stationary gas engines designed to meet the emerging legislation limiting emissions of NOx, and those which employ the latest 'lean' or 'clean' burn technology. Shell Mysella S5 N 40 is specially developed to provide extended drain intervals in those natural gas engines where oil life is a limiting operational factor.

Please note!! Price of Shell Mysella S5 N 40 drops automatically in larger quantities.

Shell Rimula R3+ 30 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 30 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3+ 30 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3+ 30 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3+30 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3+ 30 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 30 drops automatically in larger quantities.

Shell Rimula R3+ 40 

Heavy Duty Diesel Engine Oil

Shell Rimula R3+ 40 main applications:

• Dedicated diesel engine oil performance Shell Rimula R3 monogrades have been formulated to provide robust engine performance in a variety of offhighway applications or older on-highway diesel vehicles.
• Construction industry application Engine oil technology is sometimes specified for use in transmission and hydraulic applications. Shell Rimula R3 monogrades offer premium performance and protection for these applications.
• Stationary equipment Shell Rimula R3 monogrades are suitable for certain stationary equipment, such as pumps, that run continuously under steady state conditions.

Shell Rimula R3 oils adapts to your driving needs to provide extra protection and keep pistons and other engine parts clean. It provides protection against wear for long engine life and protection against deposits for efficient engine performance..

Please note!! Price of Shell Rimula R3+ 40 drops automatically in larger quantities.

Shell Omala S2 GX 680 (Formerly Omala S2 G 680)

Industrial gear oil

Shell Omala S2 GX 680 (formerly Omala S2 G680) this high viscous (thick) gear oil protects standard industrial gearboxes. Think of Gearboxes and Worm wheels that are not suitable for PAGs.

Main uses of Shell Omala S2 GX 680 are:

• + Industrial gear transmissions with closed sump
• + Heavily loaded systems with oil lubrication and circulation systems
• + Non-gear related applications (roller bearings and other (steel on steel) parts with splash or forced circulation systems).

The excellent protection against high loads, the excellent protection against micro-pitting and compatibility with elastomers and paint offer superior performance in gears with closed sump.

Please note ! Price Shell Omala S2 GX 680 drops automatically with larger quantities.

Shell Gadinia AL 30 Replacement For: Shell Gadinia 30

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia AL 30 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 30 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 30 viscosity oils.

The newly formulated Shell Gadinia S3 30 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Pay attention! Price of Shell Gadinia AL 30 drops automatically in larger quantities.

Shell Gadinia S3 40 Replacement For: Shell Gadinia 40

Lubricants for medium-speed marine diesel engines running on distillate fuels

Shell Gadinia S3 40 main applications:

• Highly rated, medium speed, main propulsion & auxiliary ·trunk-piston stationary & marine diesel engines.
• Shell Gadinia S3 40 will also perform satisfactorily in smaller high-speed engines typically used in fishing fleets which operate under arduous conditions and have small sump sizes.
• Turbochargers, oil filled stern tubes and variable pitch propellers.
• Deck machinery & other marine applications requiring SAE 40 viscosity oils.

The newly formulated Shell Gadinia S3 40 has also been optimised for use in non-engine applications which are typically found on board such as gearboxes, clutches and stern tubes.

Aeroshell Oil W 15W-50

Semi-synthetic lubricating oil for aircraft piston engines.

Application Aeroshell Oil W 15W-50

AeroShell Oil W 15W-50 is intended for use in certified fourstroke cycle aircraft piston engines. AeroShell Oil W 15W-50 is superior to single grade oils in almost every application. It offers easier starting, better lubrication after start-up, reduced wear, reduced corrosion and rusting, and improved cleanliness with oil pressures and temperatures equal to that of single grade SAE 50 oils at fully warmed up conditions. The anti-corrosion additive system is designed to prevent rust or corrosion in all types of aircraft piston engines. In comparative testing of camshaft rusting under high humidity conditions, AeroShell Oil W 15W-50 was almost entirely rust free while other camshafts conditioned on other oils showed sometimes heavy rusting on cam lobes and bearing surfaces.These results indicate that AeroShell Oil W 15W-50 can provide maximum anti-corrosion protection for aircraft piston engines, when combined with proper maintenance practices and proper operating conditions. Because of the improved flow characteristics of AeroShell Oil W 15W-50, operators may observe slightly lower oil temperatures in some aircraft. On larger aircraft, the oil cooler flap will normally compensate for this change. However, in small aircraft, oil temperature could be reduced slightly. Operators should always check the oil temperature to ensure that they are in the range specified by the manufacturer. Most manufacturers recommend cruising oil temperatures between 82 to 930C (180 to 2000 F). Oil temperatures significantly below this range can result in excessive water and fuel contamination in the crankcase.

Shell Gadinia AL 30

Advanced Lubricant for ship medium speed trunk-piston engines running on distillate fuel.

Shell Gadinia AL 30 main applications:

• Highly rated medium speed diesel engines operating under high load or overload conditions.
• General ship application, including gears, where specialist lubricants are not required.

Shell GADINIA AL 30 is a premium quality marine diesel engine oil designed for use in medium speed trunk piston engines, which operate on distillate fuels. Shell GADINIA AL 30 is specially designed to control oil consumption in modern engines, where liner -lacquering is a potential problem. Being multifunctional Shell GADINIA AL 30 can also be used for other shipboard applications such as reduction gears.

Pay attention! Price of Shell Gadinia AL 30 drops automatically in larger quantities.

Shell Helix HX7 5W-40 Previous Name:

Synthetic technology motor oil - Helps to keep engines clean and running efficiently

Shell Helix HX7 5W-40 main applications:

• Shell Helix HX7 helps to prolong the engine life of modern vehicles in demanding daily traffic conditions by protecting against wear. Shell Helix HX7 can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix HX7 helps to keep engines clean and running efficiently by helping to prevent the formation of sludge and engine deposits. It is suitable for a wide variety of modern vehicles driven by demanding traffic conditions.

Please note!! Price of Shell Helix HX7 5W-40 drops automatically in larger quantities.

Shell Spirax S4 CX 30 Previous Name: Shell Donax TC 30

High performance off-highway transmission and hydraulic oil

Spirax S4 CX 30 main applications:

• Shell Spirax S4 CX 30 is recommended for use in heavy duty off-highway equipment produced by the world’s leading manufaturers including; Caterpillar, Komatsu, Komatsu-Dresser and in transmissions manufactured by Eaton, Eaton Fuller, ZF, Dana, Rockwell amongst others:
• Powershift transmissions
• Final drives
• Oil immersed brakes
• Hydraulic systems

Shell Spirax S4 CX 30 is designed to provide operators with trouble free operation and maximum reliability for the lifetime of the equipment. Spirax S4 CX meets the demanding requirements of modern transmission, final drive, oil immersed brake and hydraulic systems fitted to heavy-duty off-highway.

Please note!! Price of Spirax S4 CX 30 drops automatically in larger quantities.

Shell Helix Ultra Racing 10W-60 

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra Racing 10W-60 main applications:

• Extreme-performance engines and racing conditions can cause excessive wear of bearings and other engine components. Shell Helix Ultra Racing has been formulated with a higher viscosity to provide exceptional bearing protection under extreme performance and racing conditions compared with lower viscosity oils.
• Shell Helix Ultra Racing is designed for modified engines and racing engines using gasoline, diesel and gas, and it is also suitable for biodiesel and gasoline/ethanol blends.
   

Designed to meet the demanding requirements of particular high-performance engines, including those requiring API SN or ACEA A3/B4.

Please note!! Price of Shell Helix Ultra Racing 10W-60 drops automatically in larger quantities.

Shell Helix Ultra ECT 5W-30 C3

Fully synthetic motor oil - Shell's ultimate protection for vehicle emission systems

Shell Helix Ultra ECT 5W-30 C3 main applications:

• Shell Helix Ultra ECT 5W30 C3 can be used for modern gasoline engines, diesel engines with particulate filters and gas engines.
• Shell Helix Ultra ECT 5W30 C3’s fully synthetic formulation uses Shell’s most advanced emissions-compatible technology to help gasoline engine exhaust catalysts and keep diesel particulate filters clean.
• Protects it from ash build-up that can block the exhaust system and lead to reduced engine performance.
• Specifications BMW LL-04; MB approval 229.51; VW 504.00/507.00; Porsche C30
   

Shell Helix Ultra ECT 5W30 C3 features its most advanced emissions-compatible technology that helps to keep diesel particulate filters clean to help maintain engine performance. It helps to reduce engine friction to provide enhanced fuel economy.

Pay attention! Price of Shell Helix Ultra ECT5W-30 C3 drops automatically in larger quantities.

Shell Rotella DD+ 40

Two-stroke heavy duty Diesel Engine Oil

Shell Rotella DD+ 40 main applications:

• Detroit Diesel two-stroke engines
• Certain 4-cycle engines
   

Shell Rotella DD+ Oil 40 is a high performance, heavy-duty engine oil designed specifically for all two-stroke diesel engines manufactured by Detroit Diesel Corporation.

Pay attention! Price of Shell Rotella DD+ 40 drops automatically in larger quantities.

Shell Gadus S2 V220 00 Previous Name: Alvania Grease EP(LF) 00, GL 00, Shell Retinax CS 00

High Performance Multipurpose Extreme Pressure Grease

Shell Gadus S2 V220 00 main applications:

• Steel mill lubrication where a softer grease is necessary for specialised dispensing systems.
• Heavy duty plain and rolling element bearings operating under severe conditions including shock loading in wet environments
• Gearbox applications where semi-fluid greases are required.
• Centralized chassis lubrication systems on trucks and buses.

Aeroshell Oil 80

Mineral lubricating oil for aircraft piston engines

Application Aeroshell Oil 80

AeroShell Oil 65 - AeroShell Oil 80 - AeroShell Oil 100 - AeroShell Oil 120. The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds. The appropriate grades of these AeroShell Oils are approved for use in four-stroke cycle (four-cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke cycle aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations

Shell Omala S4 WE 680 Previous Name: Shell Tivela S 680

Advanced Synthetic Industrial Gear Oil

Shell Omala S4 WE 680 main applications:

• Enclosed industrial worm gear systems
• Extended life systems
• Other applications

Shell Omala S4 WE 680 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.

Pay attention! Price of Shell Omala S4 WE 680 drops automatically in larger quantities.

Shell Gadus S5 V142W 00 Previous Name: Tivela Grease GL 00 & Tivela Compound A

Advance Performance Semifluid Gear Grease

Shell Gadus S5 V142W 00 main applications:

• Small industrial gear units
• Worm gears the low steel/tin-bronze frictional characteristics of Shell Gadus S5 V142W make it particularly suitable for worm gears having this combination of alloys.
• Steel/Aluminium-bronze: Shell Gadus S5 V142W is not recommended for the combination steel/aluminium- bronze, for which a grease based on a higher viscosity mineral oil is preferred.
• Flushing and filling with Shell Gadus S5 V142W: is a synthetic polyglycol based lubricant and must not be mixed with mineral oils. Care should be taken when changing over from oil or conventional grease. Flushing with a thin mineral oil will ensure, as far as possible, freedom from solid contaminants and deterioration products resulting from previous use of gear oils or greases. It is important to ensure that none of the flushing oil remains in the gearbox. When refilling the gearbox with Shell Gadus S5 V142W every precaution should be taken to ensure complete cleanliness. For optimum performance from both gearbox and lubricant, only the amount recommended by the gearbox manufacturer should be used.
• Paints. High quality red lead or epoxy resin paints are recommended for use in contact with Shell Gadus S5 V142W, as the synthetic polyglycol component will tend to attack certain conventional paints.
• Seals. Shell Gadus S5 V142W may be used satisfactorily with all normal seal materials. Leather seals are not recommended as the natural fats tend to be removed, leaving the seals thin and brittle.

Shell Gadus S5 V142W is a synthetic, semi-fluid gear lubricant developed to meet the highest requirements of industrial gearboxes allowing long life trouble free operation.

Please note!! Price of Shell Gadus S5 V142W 00 drops automatically in larger quantities.