Shell Omala S2 GX 320

Shell Omala S2 GX 320 Main Applications

• Enclosed industrial gear systems Shell Omala S2 GX 320 technology provides an effective extreme pressure (EP) formulation designed specifically for enclosed industrial gearboxes using steel-on-steel, spur, helical, or planetary gear drives, including highly loaded systems with splash or forced circulation systems. Shell Omala S2 GX 320 oils are also suitable for the lubrication of non-geared applications, that include bearings and other steel-on-steel components with splash or forced circulation systems.

Other applications Shell offers a wide range of products for other gear applications that have their own specific requirements.

• Shell Omala S4 GXV is recommended for gear systems where a synthetic lubricant is specified, when the longest lifespan is required, or when operating in environments that experience large temperature variations.
• Shell Omala S5 Wind 320 is recommended for wind turbine main gear drives.
• Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1 W are recommended for worm-wheel drives.
• For automotive gear applications, the appropriate Shell Spirax Oil should be used.

For geared systems, or other applications that employ a filtration unit finer than 5 microns, please consult us before using Shell Omala S2 GX 320.

Shell Omala S2 GX 320 Performance, Features & Benefits:

• + Long oil life through oxidation stability and resistance to thermal stress – leading to reduced total cost of ownership
• + Excellent wear and micropitting protection
• + Gear system efficiency is maintained by optimized water separation performance, corrosion and foam control
  
  

Performance, Features & Benefits of Shell Omala S2 GX 320

+ Long oil life through oxidation stability and resistance to thermal stress – leading to reduced total cost of ownership

Shell Omala S2 GX oils are formulated to reduce the risk of thermal and chemical breakdown throughout the maintenance interval. They withstand high thermal loading and resist the formation of sludge to provide extended oil life capability, even with bulk oil temperatures of up to 100°C.

+ Excellent wear and micropitting protection

Shell Omala S2 GX is formulated to have excellent load carrying capacity and micropitting performance, providing long component life.

+ Gear system efficiency is maintained by optimized water separation performance, corrosion and foam control

Shell Omala S2 GX oils display a combination of excellent water shedding capability, corrosion protection and low foam forming tendency. Water can greatly accelerate surface fatigue of gears and bearings as well as promoting ferrous corrosion on internal surfaces. Excellent corrosion protection is provided, even in the presence of contamination by seawater and solids. The oils are designed to minimize the potential for foaming, often experienced in applications where oil reservoir residence times are marginal. Excellent shear stability, maintains viscosity stability throughout the service interval. Further system efficiencies are gained through compatibility with popular seals, sealants, and engineering adhesives, to help avoid leakage. Shell Omala S2 GX is compatible with prevalent paint finishes.

Specifications, Approvals & Recommendations Shell Omala S2 GX 320

• ISO 12925-1 Type CKD (ISO 320)
• ISO 12925-1 Type CKC (ISO 320)
• DIN 51517- Part 3 CLP (ISO 320)
• AGMA EP 9005- F16 (ISO 320)
• AIST (US Steel) 224 (ISO 320)
• Fives Cincinnati: P-59 (ISO 320)

If you have any questions, please contact OilOnline Technical Helpdesk

Health, Safety & Environment of Shell Omala S2 GX 320

Health and Safety

Shell Omala S2 GX 320 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/

Protect the Environment

Take used Shell Omala S2 GX 320 to an authorised collection point. Do not discharge into drains, soil or water.
 

Typical Physical Characteristics of Shell Omala S2 GX 320

Is Shell Omala S2 G 320 the same as Shell Omala S2 GX 320?

Shell Omala S2 GX 320 is the direct successor of Shell Omala S2 G 320. The additive package has been improved so that Shell Omala S2 GX 320 is now approved by Siemens AG for use in Flender, helical, bevel, planetary and marine gearboxes. Shell Omala S2 GX 320 has high load-carrying capacity, protection against micropitting and compatibility with seals and paints, which together provide excellent performance in enclosed gearboxes.

Is Shell Omala S2 GX 320 a DIN 51517 CLP 320 oil?

Yes, in fact, DIN CLP 320 is a minimum quality gear oil. Even though the requirements of DIN CLP 320 are adjusted over time, it actually says little about the quality differences. Shell Omala S2 GX 320 far exceeds the results required for a DIN CLP 320. Want to know more? Please contact the specialists at OilOnline.

Where can I buy Shell Omala S2 GX 320?

OilOnline is the largest online lubricant webshop, exclusively offering world-famous brands including Shell Omala S2 GX 320. Customers of OilOnline appreciate the convenience and time saving that they can buy lubricants online 24/7 at a competitive price. No questions asked: Knowledge is our strength! www.oilonline.store