Shell Omala S4 GXV 68

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Your benefit: pallet advantage from 2 barrels

97% supplied in 5 working days

Shipping Rate

No VAT within the EU

Pay online or by invoice (within 30 days)

Overview

Shell Omala S4 GXV 68

Advanced Synthetic Industrial Gear Oil

Application Shell Omala S4 GXV 68

Drive systems and other inaccessible installations. Shell Omala S4 GXV 68 is excellent for installations that require an extra long oil bath life and/or where irregular maintenance occurs due to difficult accessibility of the installation. Excellent compatibility with elastomers, paints and sealants. Compatible with a wide range of seals used in industrial systems, e.g. nitrile rubber and fluoroelastomers. Homologated against the stringent Siemens requirements for Flender gears and geared motors. Industrial gearing with closed sump Recommended for industrial gearing under severe operating conditions such as high peak or shock loading and/or low, high or highly fluctuating oil bath temperatures. Other Applications Shell Omala S4 GXV 68 can be used for the lubrication of bearings and other components in systems with circulation or oil splash lubrication. For the lubrication of heavily loaded worm gears, the use of Shell Omala "W" lubricating oils is recommended. For hypoid transmissions in vehicles, the use of suitable Shell Spirax is recommended.

Details

Product Description Shell Omala S4 GXV 68

Shell Omala S4 GXV 68 is an advanced synthetic gear oil for heavy-duty applications approved by Siemens AG. It offers excellent lubrication properties under severe conditions, thanks to high resistance to micro-pitting for optimal gear protection, extended oil bath life, reduced coefficient of friction and excellent compatibility with elastomers

Performance, Features & Benefits of Shell Omala S4 GXV 68 are:

Extended oil life - savings on maintenance. Shell Omala S4 GXV 68 is formulated on the basis of specially selected synthetic base oils in combination with an advanced additive package to ensure long-lasting, high-quality protection under the most extreme conditions. Shell Omala S4 GXV 68 can be successfully used at oil bath temperatures up to 1200C. Shell Omala S4 GXV 68 provides the ability to significantly extend oil change intervals compared to conventional industrial gear oils.
Excellent corrosion and wear protection. Shell Omala S4 GXV 68 is formulated to provide excellent protection against micro-pitting, even under shock loading. These properties deliver extended life of the various components, such as gears and bearings, compared to conventional mineral oils. Shell Omala S4 GXV 68 provides excellent corrosion protection even in the presence of contamination from water or solid particles
Preservation of system efficiency. Shell Omala S4 GXV 68 helps to increase system efficiency by providing low viscosity at low temperature (start-up) and maintaining a better and stronger oil lubrication film at operating temperature. This is accomplished, among other things, by the lower frictional resistance of the accumulated oil film.

Specifications of Shell Omala S4 GXV 68 are:

ISO 12925-1 Type CKD
ANSI/AGMA 9005-F16
Shell Omala S4 GXV ISO 150 – 680 zijn goedgekeurd door Siemens AG voor gebruik in Flender tandwieloverbrengingen en motorreductoren
DIN 51517-3 (CLP)
China National Standard GB 5903-2011 CKD
AIST (US Steel) Req. No. 224

If you have any questions, please contact OilOnline Technical Helpdesk

Health, Safety & Environment of Shell Omala S4 GXV 68

Health and Safety

Shell Omala S4 GXV 68 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.

Protect the enviroment

Take used Shell Omala S4 GXV 68 to an authorised collection point. Do not discharge into drains, soil or water

Typical Characteristics

Properties			Method	Shell Omala S4 GXV 68
Kinematic viscosity	@40°C	mm2/s	ASTM D445	68
Kinematic viscosity	@100°C	mm2/s	ASTM D445	11
Viscosity Index (VI)	-	-	ASTM D2270	157
Flash point, open crucible	-	°C minimum	ASTM D92	240
Solidification point	-	°C	ASTM D97	-51
Density	@15°C	kg/m3	ASTM D4052	860
Four Ball EP Weld load	-	kg minimum	ASTM D2783	250
Load test FZG A/8.3/90	-	Breakdown	ISO 14635-1	>12
Load Test FZG A/8.3/90 Modified	-	Breakdown	ISO 14635-1 Modified	>14