7 warehouses in Europe
Shell Omala S4 GXV 68
97% supplied in 5 working days
Shipping costs for all EU countries are calculated at checkout.
VAT number required
during checkout
Pay online or by invoice (within 30 days)
Shell Omala S4 GXV 68
Advanced Synthetic Industrial Gear Oil
Application Shell Omala S4 GXV 68
Drive systems and other inaccessible installations. Shell Omala S4 GXV 68 is excellent for installations that require an extra long oil bath life and/or where irregular maintenance occurs due to difficult accessibility of the installation. Excellent compatibility with elastomers, paints and sealants. Compatible with a wide range of seals used in industrial systems, e.g. nitrile rubber and fluoroelastomers. Homologated against the stringent Siemens requirements for Flender gears and geared motors. Industrial gearing with closed sump Recommended for industrial gearing under severe operating conditions such as high peak or shock loading and/or low, high or highly fluctuating oil bath temperatures. Other Applications Shell Omala S4 GXV 68 can be used for the lubrication of bearings and other components in systems with circulation or oil splash lubrication. For the lubrication of heavily loaded worm gears, the use of Shell Omala "W" lubricating oils is recommended. For hypoid transmissions in vehicles, the use of suitable Shell Spirax is recommended.
Product Description Shell Omala S4 GXV 68
Shell Omala S4 GXV 68 is an advanced synthetic gear oil for heavy-duty applications approved by Siemens AG. It offers excellent lubrication properties under severe conditions, thanks to high resistance to micro-pitting for optimal gear protection, extended oil bath life, reduced coefficient of friction and excellent compatibility with elastomers
Performance, Features & Benefits of Shell Omala S4 GXV 68 are:
- Extended oil life - savings on maintenance. Shell Omala S4 GXV 68 is formulated on the basis of specially selected synthetic base oils in combination with an advanced additive package to ensure long-lasting, high-quality protection under the most extreme conditions. Shell Omala S4 GXV 68 can be successfully used at oil bath temperatures up to 1200C. Shell Omala S4 GXV 68 provides the ability to significantly extend oil change intervals compared to conventional industrial gear oils.
- Excellent corrosion and wear protection. Shell Omala S4 GXV 68 is formulated to provide excellent protection against micro-pitting, even under shock loading. These properties deliver extended life of the various components, such as gears and bearings, compared to conventional mineral oils. Shell Omala S4 GXV 68 provides excellent corrosion protection even in the presence of contamination from water or solid particles
- Preservation of system efficiency. Shell Omala S4 GXV 68 helps to increase system efficiency by providing low viscosity at low temperature (start-up) and maintaining a better and stronger oil lubrication film at operating temperature. This is accomplished, among other things, by the lower frictional resistance of the accumulated oil film.
Specifications of Shell Omala S4 GXV 68 are:
- ISO 12925-1 Type CKD
- ANSI/AGMA 9005-F16
- Shell Omala S4 GXV ISO 150 – 680 zijn goedgekeurd door Siemens AG voor gebruik in Flender tandwieloverbrengingen en motorreductoren
- DIN 51517-3 (CLP)
- China National Standard GB 5903-2011 CKD
- AIST (US Steel) Req. No. 224
If you have any questions, please contact OilOnline Technical Helpdesk
Health, Safety & Environment of Shell Omala S4 GXV 68
Health and Safety
Shell Omala S4 GXV 68 Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.
Protect the enviroment
Take used Shell Omala S4 GXV 68 to an authorised collection point. Do not discharge into drains, soil or water
Typical Characteristics
| Properties | Method | Shell Omala S4 GXV 68 | ||
| Kinematic viscosity | @40°C | mm2/s | ASTM D445 | 68 |
| Kinematic viscosity | @100°C | mm2/s | ASTM D445 | 11 |
| Viscosity Index (VI) | - | - | ASTM D2270 | 157 |
| Flash point, open crucible | - | °C minimum | ASTM D92 | 240 |
| Solidification point | - | °C | ASTM D97 | -51 |
| Density | @15°C | kg/m3 | ASTM D4052 | 860 |
| Four Ball EP Weld load | - | kg minimum | ASTM D2783 | 250 |
| Load test FZG A/8.3/90 | - | Breakdown | ISO 14635-1 | >12 |
| Load Test FZG A/8.3/90 Modified | - | Breakdown | ISO 14635-1 Modified |
>14 |
Satisfied customers:
Quality brands only
genuine packages
Save costs
take control of your costs
save time and money
Global Deliveries
sea containers
air freight worldwide
