Shell Omala S4 WE 220

Shell Omala S4 WE 220 Main Applications

Enclosed industrial worm gear systems Recommended for industrial worm gear reduction systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide ·temperature variations. Extended life systems Shell Omala S4 WE 220 is particularly recommended for certain systems where maintenance is infrequent or systems are ·inaccessible (eg yaw gears in wind turbine installations). Other applications Shell Omala S4 WE 220 oils are suitable for lubrication of bearings and other components in circulating and splash- lubricated systems. Shell Omala S4 WE 220 is not recommended for the lubrication of components manufactured from aluminium or aluminium alloys. For highly-loaded spur and helical gears, the Shell Omala “G” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Specifications, Approvals & RecommendationsShell Omala S4 WE 220

DIN 51517-3 (CLP) Fully approved by Bonfiglioli

Shell Omala S4 WE 220 benefits:

• + Long oil life - maintenance saving
• + Excellent wear protection
• + Maintaining system efficiency

Performance, Features & Benefits of Shell Omala S4 WE 220

+ Long oil life - maintenance saving

Shell Omala S4 WE 220 is formulated to provide excellent oxidation and thermal stability, extending lubricant life and resisting the formation of harmful oxidation products at high operating temperatures. This helps maintain system cleanliness over extended maintenance intervals. Shell Omala S4 WE 220 offers the potential to extend service intervals significantly compared to conventional industrial gear oils.

+ Excellent wear protection

Shell Omala S4 WE 220 is formulated to have excellent load carrying capacity providing long component life even under shock loading conditions. It also has a high resistance to micro-pitting. These features provide benefits over mineral oil-based products in terms of gear and bearing component life.

+ Maintaining system efficiency"

Shell Omala S4 WE 220 offers improved energy efficiency and lower operating temperatures in worm gear applications. Rig testing has shown efficiency improvements of up to 15% in comparison with mineral oil-based products and 11% over other synthetic hydrocarbon-based lubricants. These results have been confirmed by OEM testing and field experience.

Compatibility & Miscibility

Seal & Paint Compatibility

Seal & Paint Compatibility High-quality epoxy paints are recommended, as polyalkylene glycols will tend to attack certain conventional paints. Shell Omala S4 WE 220 has been found to be satisfactory with nitrile and Viton seal materials, although Viton seals are preferred.

Change-over Procedure

Shell Omala S4 WE 220 contains polyalkylene glycols and is not compatible with mineral oils or most other synthetic lubricant types. Care should be taken when changing from such products to Shell Omala S4 WE 220. The system should be flushed with the minimum quantity of Shell Omala S4 WE 220, operating under no load and draining whilst warm. Ideally, seals exposed to mineral oils should also be replaced. Inspect the lubricant after a few days use. Ensure that oil systems are clean and free from contamination. Shell Omala S4 WE 220 is also not miscible with some other polyalkylene glycols, so caution is needed when topping-up. Generally, the preference is to avoid mixtures by draining and refilling.

If you have any questions, please contact OilOnline Technical Helpdesk

Health, Safety & Environment of Shell Omala S4 WE 220

Shell Omala S4 WE 220 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water. Health and Safety Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com ·Protect the Environment Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics of Shell Omala S4 WE 220

What is the difference between Shell Omala S4 WE 220 and Shell Tivela WB oil?

Shell Omala S4 WE 220 is the direct successor to Shell Tivela WB. Shell Omala S4 WE 220 is an extremely well lubricating worm gear oil. Be careful, however, because it is not compatible with all seals and paints. Shell Omala S4 WE 220 is not miscible with PAOs or mineral oil.

Where can I buy Shell Omala S4 WE 220?

OilOnline is the largest online lubricant webshop with only worldwide known brands including Shell Omala S4 WE 220. OilOnline's customers appreciate the convenience and time savings of being able to buy lubricants online 24/7 at competitive prices. Questions no problem: Knowledge is our strength! www.oilonline.store What is difference between Shell Omala S4 GXV 220 and Shell Omala S4 WE 220? Shell Omala S4 WE 220 is a PAG and Omala S4 GXV 220 is a PAO. Shell Omala S4 WE 220 is suitable for worm gear lubrication, while Omala S4 GXV 220 is suitable for all other gears.