Shell Tellus S3 M 32

Shell Tellus S3 M 32 Main Applications

Manufacturing and industrial hydraulic systems
Shell Tellus S3 M 32 fluids are suitable for a wide range of hydraulic power applications found in manufacturing and ·industrial environments.

Severe duty hydraulic service
Page 1 of 3 Tellus S3 M 32, v 4.4 25.11.2015.10.55 The long-life characteristics of Shell Tellus S3 M 32 fluids can make them particularly suitable for severe duty (e.g. load, temperature) applications or where extended life is required (e.g. Remote or inaccessible locations).

Marine and mobile hydraulic systems
Shell Tellus S3 M 32 fluids are suitable for marine and mobile applications where ISO HM type hydraulic fluids are recommended.

Low toxicity towards the environment
Shell Tellus S3 M 32 has a reduced environmental impact in the event of a leak or accidental spillage compared to conventional zinc-based hydraulic fluids. This is achieved through the use of zinc-free anti-wear technology and low sulphur base oils. Shell Tellus S3 M32 is classified as 'not harmful' to freshwater and marine invertebrates when tested as water-accommodated fractions (WAFs) according to OECD and EPA test guidelines. For further reductions in environmental impact, we offer the Shell Naturelle range of environmentally considerate lubricants. For applications that experience wide temperature variations, we recommend the Shell Tellus S3 “V” series of hydraulic fluids.

Compatibility & Miscibility

Compatibility & Miscibility ·Compatibility Shell Tellus S3 M 32 fluids are suitable for use with most ·hydraulic pumps. Fluid Compatibility Shell Tellus S3 M 32 fluids are compatible with most other mineral oil based hydraulic fluids. However, mineral oil hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids). Seal & Paint Compatibility Shell Tellus S3 M 32 fluids are compatible with seal materials and paints normally specified for use with mineral oils.

Shell Tellus S3 M 32 benefits:

• + Long fluid life - maintenance saving
• + Outstanding wear protection
• +·Maintaining system efficiency

Performance, Features & Benefits of Shell Tellus S3 M 32

Long fluid life - maintenance saving

Shell Tellus S3 M 32 oils offer an improved capability to extend fluid maintenance intervals and hence reduce equipment downtime through:
- An extended ASTM D943 TOST lifetime, with an oxidative stability that is designed for a minimum 5000 hours TOST life.
- Excellent resistance to breakdown in the presence of water and heat.
These features provide extended maintenance capability without compromising protection or performance, even under severe or extended temperature range applications.

Outstanding wear protection

Advanced zinc-free anti-wear additives provide protection over a wide range of conditions, including low an severe duty, and high load operation. This protection has been demonstrated in tough industry standard hydraulic pump tests such as the Denison T6C and Eaton Vickers 35VQ25 tests.

Maintaining system efficiency

Superior cleanliness and filterability; coupled with excellent water separation, air release and anti-foam characteristics, all help to maintain or enhance hydraulic system efficiency. The filterability of Shell Tellus S3 M32 is maintained even when the fluid is contaminated with water. Shell Tellus S3 M32 fluids have an ISO 4406 cleanliness of 21/19/16 or better ex Shell filling lines. As recognized by DIN 51524 specification, the oil is exposed to various influences with transport and storage that could affect the cleanliness level.

Protect the Environment

Take used Shell Tellus S3 M32 to an authorised collection point. Do not discharge into drains, soil or water.

If you have any questions, please contact OilOnline Technical Helpdesk

Is Shell Tellus S 32 the same as Shell Tellus S3 M 32?

Shell Tellus S3 M 32 is the direct successor of Shell Tellus S 32. This name change was made in 2014. This is a better filterable hydraulic oil with a high base oil quality that can handle higher pressures than the Tellus S2 series.

Is Shell Tellus S3 M 32 a DIN 51517 HLP 32 oil?

Yes, in fact, DIN HLP 32 is a minimum quality hydraulic oil. Even though the requirements of DIN HLP 32 are modified over time, it actually says little about the quality differences. Shell Tellus S3 M 32 scores much better than the results required for a DIN HLP 32. Want to know more? Please contact the specialists at OilOnline.

Where can I buy Shell Tellus S3 M 32?

OilOnline is the largest online lubricant webshop with only worldwide renowned brands including Shell Tellus S3 M 32. Customers of OilOnline appreciate the convenience and time saving that they can buy lubricants online 24/7 at a competitive price. No questions asked: Knowledge is our strength! www.oilonline.store