Compressor

RENISO TRITON SE 170

Synthetic refrigeration oils based on polyol esters (POE) for HFC/FC refrigerants

RENISO TRITON SE 170 field of applications:

The RENISO TRITON SE/SEZ series is outstandingly suited for all refrigeration circuits, in which chlorine-free HFC/FC refrigerants, e.g. R134a, R404A or R410A are used. Depending on the viscosity, RENISO TRITON SE/SEZ refrigeration oils are recommended for hermetical, semihermetical and open piston compressors and for screw-type and turbo-compressors. RENISO TRITON SEZ 22 is especially suitable for deepfreeze systems operating with R23

Please note!! Price of RENISO TRITON SE 170 drops automatically in larger quantities.

Klüber Summit Ultima 68

Synthetic air compressor oils for oil change intervals up to 12,000 operating hours

Application Klüber Summit Ultima 68

Klüber Summit Ultima oils have been especially designed for screw-type compressors subject to high loads. They are used for oil change intervals up to 12,000 operating hours in oilinjected screw-type compressors. Klüber Summit Ultima oils can be used for compressors that were previously run with mineral oils. Klüber Summit Ultima oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit Ultima oils offer better oxidation stability than conventional synthetic oils due to the synthetic base oil content, thus minimising oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oil keep the inside of compressors clean and ensure a high efficiency. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be reduced several-fold compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; it also helps to prevent the gumming of pneumatic valves in the compressed air circuit.

Klüber Summit DSL 46

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 46

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Summit DSL 125

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 125

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber Summit DSL 100

Fully synthetic air compressor oils for oil change intervals up to 8,000 operating hours

Application Klüber Summit DSL 100

The Klüber Summit DSL 32 … 68 oils have been especially designed for oil change intervals up to 8,000 operating hours* in oil-injected screw-type compressors. Klüber Summit DSL 32 and 46 can also be used for the lubrication of centrifugal compressors, whereas Klüber Summit DSL 68 ... 125 is particularly suitable for the lubrication reciprocating piston compressors. Klüber Summit DSL oils are used for compressors that were previously run with conventional mineral oils. These oils are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit DSL 32 oils are mainly used in reciprocating piston compressors which do not achieve the desired maintenance intervals when using mineral oils or which show severe residue formation (carbon buildups) on valves and in the compression chamber. Klüber Summit DSL 32, 46, and 68 are biodegradable and can therefore be used in eco-sensitive applications. Klüber Summit DSL oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators (screw-type compressors) and valves (reciprocating piston compressors).

Klüber ISOFLEX LDS 18 SPECIAL A

Dynamically light, long-term lubricating grease

Application Klüber ISOFLEX LDS 18 SPECIAL A

ISOFLEX LDS 18 SPECIAL A is suitable for plain and rolling bearings operating at low temperatures and/or high speeds, for example in grinding spindles, machine tool spindles, spindle bearings, textile spindles, bearings in OE-spinning turbines, bearings in precision and optical equipment.

Klüber Klüber Summit SH 55

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Klüber Summit SH 55

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

Klüber Summit SH 100

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours

Application Klüber Summit SH 100

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours. Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils. They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected. Klüber Summit SH 32 is especially suitable for centrifugal compressors and Klüber Summit SH 100 for reciprocating piston compressors. Klüber Summit SH oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators. Special inhibitors contained in the oils keep the inside of compressors clean. Owing to the evaporation stability of the base oil, the oil vapour content in the compressed air can be considerably reduced compared to conventional mineral oils. This contributes to a reduction of oil consumption and clean compressed air; gumming of pneumatic valves in the compressed air circuit can be prevented as well due to the low oil content of the Klüber Summit SH oils.

TOTAL DACNIS LD 32

Hydrocracked mineral oils for lubricated screw air compressors.

Applications TOTAL DACNIS LD 32

• Hydrocracked mineral oils with very high-performance additivation for lubrication of lubricated screw air compressors.
• DACNIS LD is characterized by its longer drain interval, which can reach 4000h for lubricated screw compressors, under standard conditions of use.
• Use under conditions in which the discharge temperature does not exceed 100°C. Beyond this, the use of synthetic lubricant is advised

Your advantage! Price of TOTAL DACNIS LD 32 drops automatically in larger quantities.

Shell Refrigeration Oil S2 FR-A 46

Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S2 FR-A 46

Refrigerator compressors · Shell Refrigeration Oil S2 FR-A is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Shell Refrigeration Oil S2 FR-A is recommended for use with ammonia (R717) based refrigeration systems where it offers excellent performance, even under high compressor discharge temperatures, or down to evaporation temperatures of -30°C. It can also be used in systems using hydrocarbons such as propane (R290). Shell Refrigeration Oil S2 FR-A is not recommended for use with CFC, HCFC or HFC refrigerants such as R12, R22 or R134a.

RENISO C85E

Refrigeration oils for CO2 compressors

RENISO C85E field of applications:

The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.

Please note!! Price of RENISO C85E drops automatically in larger quantities.

Shell Gas Compressor Oil S3 PY 220 previously Shell Corena E 220

Compressor oil for applications in hyper compressors / ethylene gas compressors

Application Shell Gas Compressor Oil S3 PY 220

Hyper-compressors. Shell Gas Compressor Oil S3 PY has been used for more than 10 years in a variety of different hyper compressors. The ISO viscosity class 220 allows low feed rates, which reduces the oil content remaining in the polymer. However, the use of ISO viscosity class requires a higher working temperature at the cylinder. Shell Gas Compressor Oil S3 PY 150 is used for loss lubrication at standard temperatures.

Applications in the food industry. Shell Gas Compressor Oil S3 PY meets the requirements of the US FDA for occasional food contact.

Pharmaceutical applications. The oil is suitable for use in the production of polymers used in the pharmaceutical industry.

LDPE insulation. The use of Shell Gas Compressor Oil S3 PY allows the production of an LDPE with good dielectric properties, which can be used for cable insulation.

RENISO C170E

Refrigeration oils for CO2 compressors

RENISO C170E field of applications:

The RENISO C refrigeration oils were specifically developed for use in refrigeration systems that are run on carbon dioxide refrigerant. Due to their favourable miscibility properties, sufficient oil reflux is ensured at low evaporation temperatures in particular. The areas of application are in practically all fields of industrial and commercial refrigeration, e.g. walk-in freezer units and aggregate cooling systems.

Please note!! Price of RENISO C170E drops automatically in larger quantities.

Shell Refrigeration Oil S4 FR-V 46

Advanced synthetic oil for refrigeration compressor

Application Shell Refrigeration Oil S4 FR-V 46

Refrigeration compressors. Shell Refrigeration Oil S4 FR-V is recommended for use in open, semi-open and hermetically sealed compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Because of its strong solvent power and compatibility with mineral oils, it can be used as a flushing agent in turbine oil circuits. For more information please contact your local Shell representative.

Shell Refrigeration Oil S4 FR-V 68

Advanced synthetic oil for refrigeration compressor

Application Shell Refrigeration Oil S4 FR-V 68

Refrigeration compressors. Shell Refrigeration Oil S4 FR-V is recommended for use in open, semi-open and hermetically sealed compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Because of its strong solvent power and compatibility with mineral oils, it can be used as a flushing agent in turbine oil circuits. For more information please contact your local Shell representative.

Shell Gas Compressor Oil S4 RN 68 previously Shell Madrela GP

Advanced Synthetic Gas Compressor Oil

Application Shell Gas Compressor Oil S4 RN 68

Rotary screw gas compressors. Shell Gas Compressor Oil S4 RN is suitable for shaft and rotor lubrication of rotary screw compressors used for low pressure compression of natural gas.

LPG bottling. Shell Gas Compressor Oil S4 RN is suitable for use in rotary screw compressors used for bottling LPG up to 40 bar pressure

LPG and LNG vehicle fuelling. Suitable for use in compressors handling natural and petroleum gas for vehicle fueling applications

Multiple gas transportation vessels. Shell Gas Compressor Oil S4 RN is suitable for compressing a wide variety of hydrocarbon gases. When used in marine cargo compressors, there is no need to change lubricant with a change in gas being transported

Shell Refrigeration Oil S4 FR-F 100

Advanced Synthetic Refrigerator Compressor Lubricant

Application Shell Refrigeration Oil S4 FR-F 100

Refrigerator Compressors Shell Refrigeration Oil S4 FR-F is recommended for use in open, semi-open and hermetic compressors in domestic, commercial and industrial refrigeration systems. It can be used in both rotary and reciprocating compressor types. Refrigerant Compatibility Shell Refrigeration Oil S4 FR-F is recommended for use with R134a and other types of HFC refrigerant.Seal Compability Shell Refrigeration Oil S4 FR-F is compatible with all sealing materials commonly used with HFC refrigerant systems.

Shell Gas compressor oil S4 PV 190 previously Shell Madrela GP

Synthetic special oil for gas compressors

Application Shell Gas compressor oil S4 PV 190

Gas compressors. The lubrication system of closed compressors that compress hydrocarbons and other synthetic gases, and the crankcase and bearings operate in the gas atmosphere.

Labyrinth piston compressor. Labyrinth piston compressors, which do not require cylinder lubrication. Shell Gas Compressor Oil S4 PV is required for pressure lubrication of the plain bearings (in a closed crankcase).

A wide range of gas compressor applications. Shell Gas Compressor Oil S4 PV is suitable for compressors that compress the following gases: Methane; butene; ethane; butadiene; ethylene; vinyl chloride; propane; propylene; ammonia; inert gases (dried); butane.